| Message ID | 20210923065500.2284347-8-daniel@0x0f.com |
|---|---|
| State | New |
| Headers | show |
| Series | gpio: msc313: Add gpio support for ssd20xd | expand |
Hi! > Add the red and white leds present on the unitv2. Thanks for cc-ing me. > @@ -18,6 +20,18 @@ aliases { > chosen { > stdout-path = "serial0:115200n8"; > }; > + > + leds { > + compatible = "gpio-leds"; > + led-white { > + gpios = <&gpio SSD20XD_GPIO_GPIO0 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "activity"; > + }; > + led-red { > + gpios = <&gpio SSD20XD_GPIO_GPIO1 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "heartbeat"; > + }; > + }; How do these look in userspace (ls /sys/class/leds)? See Documentation/devicetree/bindings/leds/common.yaml . Should the first one be disk-activity? Best regards, Pavel
Hi Pavel, On Wed, 1 Dec 2021 at 03:56, Pavel Machek <pavel@ucw.cz> wrote: > > Hi! > > > Add the red and white leds present on the unitv2. > > Thanks for cc-ing me. > > > @@ -18,6 +20,18 @@ aliases { > > chosen { > > stdout-path = "serial0:115200n8"; > > }; > > + > > + leds { > > + compatible = "gpio-leds"; > > + led-white { > > + gpios = <&gpio SSD20XD_GPIO_GPIO0 GPIO_ACTIVE_LOW>; > > + linux,default-trigger = "activity"; > > + }; > > + led-red { > > + gpios = <&gpio SSD20XD_GPIO_GPIO1 GPIO_ACTIVE_LOW>; > > + linux,default-trigger = "heartbeat"; > > + }; > > + }; > > How do these look in userspace (ls /sys/class/leds)? From what I remember the above results in /sys/class/leds/red and /sys/class/leds/white. I'll check though. Is there something wrong with that? :) >Should the first one be disk-activity? Good question. My personal preference was for some sort of load indicator as it helped me when debugging. That's why I have heartbeat and activity. An "I'm alive signal" and some indication of how much is going on. I'm not sure if disk-activity is too useful with these devices as they usually have everything in a very small rootfs and don't do lots of disk io because they have pretty small SPI NAND flash for local storage. Also there isn't anything in mainline that'll trigger the disk-activity trigger at the moment. As "activity" isn't documented in the bindings and I don't think I got an answer from Rob about it, maybe I'll just drop the trigger for now. Cheers, Daniel
Hi! > > > Add the red and white leds present on the unitv2. > > > > Thanks for cc-ing me. > > > > > @@ -18,6 +20,18 @@ aliases { > > > chosen { > > > stdout-path = "serial0:115200n8"; > > > }; > > > + > > > + leds { > > > + compatible = "gpio-leds"; > > > + led-white { > > > + gpios = <&gpio SSD20XD_GPIO_GPIO0 GPIO_ACTIVE_LOW>; > > > + linux,default-trigger = "activity"; > > > + }; > > > + led-red { > > > + gpios = <&gpio SSD20XD_GPIO_GPIO1 GPIO_ACTIVE_LOW>; > > > + linux,default-trigger = "heartbeat"; > > > + }; > > > + }; > > > > How do these look in userspace (ls /sys/class/leds)? > > >From what I remember the above results in /sys/class/leds/red and > /sys/class/leds/white. > I'll check though. Is there something wrong with that? :) Yes. LEDs are supposed to be named device:color:function. Did manufacturer somehow label them? See also Documentation/leds/well-known-leds.txt . > >Should the first one be disk-activity? > > Good question. My personal preference was for some sort of load > indicator as it helped me when debugging. That's why I have heartbeat > and activity. An "I'm alive signal" and some indication of how much is > going on. > I'm not sure if disk-activity is too useful with these devices as they > usually have everything in a very small rootfs and don't do lots of > disk io because they have pretty small SPI NAND flash for local > storage. Also there isn't anything in mainline that'll trigger the > disk-activity trigger at the moment. > As "activity" isn't documented in the bindings and I don't think I got > an answer from Rob about it, maybe I'll just drop the trigger for now. CPU activity is fine, too, but we want that option documented as you did later in the series. Best regards, Pavel
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts index a81684002e45..a51490defabc 100644 --- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts @@ -7,6 +7,8 @@ /dts-v1/; #include "mstar-infinity2m-ssd202d.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "UnitV2"; compatible = "m5stack,unitv2", "mstar,infinity2m"; @@ -18,6 +20,18 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + led-white { + gpios = <&gpio SSD20XD_GPIO_GPIO0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "activity"; + }; + led-red { + gpios = <&gpio SSD20XD_GPIO_GPIO1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; }; &pm_uart {
Add the red and white leds present on the unitv2. Signed-off-by: Daniel Palmer <daniel@0x0f.com> --- .../boot/dts/mstar-infinity2m-ssd202d-unitv2.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)