From patchwork Wed Sep 22 02:56:37 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhiyong Tao X-Patchwork-Id: 1530993 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4HDjch6wbxz9sW1 for ; Wed, 22 Sep 2021 12:56:52 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229909AbhIVC6T (ORCPT ); Tue, 21 Sep 2021 22:58:19 -0400 Received: from mailgw01.mediatek.com ([60.244.123.138]:44616 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S230283AbhIVC6T (ORCPT ); Tue, 21 Sep 2021 22:58:19 -0400 X-UUID: 19a2980569c1447f87762b11161d7dcf-20210922 X-UUID: 19a2980569c1447f87762b11161d7dcf-20210922 Received: from mtkcas11.mediatek.inc [(172.21.101.40)] by mailgw01.mediatek.com (envelope-from ) (Generic MTA with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 366363105; Wed, 22 Sep 2021 10:56:45 +0800 Received: from MTKCAS06.mediatek.inc (172.21.101.30) by mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Wed, 22 Sep 2021 10:56:43 +0800 Received: from localhost.localdomain (10.17.3.154) by MTKCAS06.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Wed, 22 Sep 2021 10:56:42 +0800 From: Zhiyong Tao To: , , , , CC: , , , , , , , , , , , , Subject: [PATCH v13 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description Date: Wed, 22 Sep 2021 10:56:37 +0800 Message-ID: <20210922025640.11600-3-zhiyong.tao@mediatek.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20210922025640.11600-1-zhiyong.tao@mediatek.com> References: <20210922025640.11600-1-zhiyong.tao@mediatek.com> MIME-Version: 1.0 X-MTK: N Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org For supporting SI units in "bias-pull-down" & "bias-pull-up", Change pull up/down description Signed-off-by: Zhiyong Tao --- .../bindings/pinctrl/pinctrl-mt8195.yaml | 65 ++++++++++++++++++- 1 file changed, 63 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml index 2f12ec59eee5..2f2afabbe4fc 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -85,9 +85,70 @@ patternProperties: 2/4/6/8/10/12/14/16mA in mt8195. enum: [0, 1, 2, 3, 4, 5, 6, 7] - bias-pull-down: true + bias-pull-down: + description: | + For pull down type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" + define in mt8195. + For pull down type is RSEL, it can add RSEL define & resistance value(ohm) + to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195. + An example of using RSEL define: + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-down = ; + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel_resistance_in_si_unit; + } + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-down = <75000>; + }; + }; - bias-pull-up: true + bias-pull-up: + description: | + For pull up type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" + define in mt8195. + For pull up type is RSEL, it can add RSEL define & resistance value(ohm) + to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195. + An example of using RSEL define: + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-up = ; + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel_resistance_in_si_unit; + } + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-up = <1000>; + }; + }; bias-disable: true