diff mbox series

[RFC,gpio/for-next,1/2] dt-bindings: gpio-mux-input: add documentation

Message ID 20210325122832.119147-2-sandberg@mailfence.com
State New
Headers show
Series gpio: add generic gpio input multiplexer | expand

Commit Message

Mauri Sandberg March 25, 2021, 12:28 p.m. UTC 
Add documentation for a general GPIO multiplexer.

Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
---
 .../bindings/gpio/gpio-mux-input.yaml         | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml b/Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml
new file mode 100644
index 000000000000..f436000fe138
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml
@@ -0,0 +1,55 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mux-input.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO input multiplexer
+
+maintainers:
+  - Mauri Sandberg <sandberg@mailfence.com>
+
+description: |
+  A generic GPIO based input multiplexer
+
+  This driver uses mux-controller to drive the multiplexer.
+
+  For consumer use see gpio.txt.
+
+properties:
+  compatible:
+    enum:
+      - gpio-mux-input
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  pin-gpios:
+    description: |
+      The GPIO pin used the output from the multiplexer
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+  - pin-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    gpio2: key-mux1 {
+        compatible = "gpio-mux-input";
+        mux-controls = <&mux>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        // GPIOs used by this node, mux output pin
+        pin-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;	/* 1y */
+    };
+
+...