From patchwork Thu Mar 4 08:56:59 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?= X-Patchwork-Id: 1447165 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20161025 header.b=rOdXh4sW; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4DrlCh1YhKz9sWY for ; Thu, 4 Mar 2021 19:58:56 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236995AbhCDI6H (ORCPT ); Thu, 4 Mar 2021 03:58:07 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47786 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236978AbhCDI57 (ORCPT ); Thu, 4 Mar 2021 03:57:59 -0500 Received: from mail-wm1-x329.google.com (mail-wm1-x329.google.com [IPv6:2a00:1450:4864:20::329]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2DA55C061761; Thu, 4 Mar 2021 00:57:19 -0800 (PST) Received: by mail-wm1-x329.google.com with SMTP id w7so7284977wmb.5; Thu, 04 Mar 2021 00:57:19 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:subject:date:message-id:in-reply-to:references:mime-version :content-transfer-encoding; bh=yQ6gpjABo8+ZcOfCkcbWgRpU81gfkOshjEp0QdpaCrw=; b=rOdXh4sWwu1uxY/8s9SeS8i0r4u7lrMUFdJi7vJ3JtQoIMHC9Dk/VvSZZ7f4Ud2bop ux13bFpV9hZUY4pUAxKM4Xc3c5VQZUN3pe92xbB/Zz1npEWT36hCqZYs8LCGqwsZkjbU sNx0wuixjfZWUVELIdeOVrTFvBlB+S+sf5/VtF6vqKi81QLNzNu/mnhQq4LrzdtdYvd7 7FxLqO01Sup9aNIKinnY7v8DFVrxrGNzZU8RgH/OEAHsQ1TPUDWyrsHZRZQpMFzN88ZN uM0ER5OhVP/ql4dAA/g+Y0wLbKV6n2vkF9xXmiVPRKdpe4ta7kzg7/vFRpubYmPl4z4W 5ozA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=yQ6gpjABo8+ZcOfCkcbWgRpU81gfkOshjEp0QdpaCrw=; b=CmV4Sg6J1+GVt/JR/UBWFV0qh7oklr6+zOVSXes+kOmriqb4KqUuZkGx4/4QYFYfEk Q7g/ugD/ZYrvSHBmKYuxofQOXGhNDRmlmwZUaahfDQvqIIWSgDa72+BicNEk+Dge1COl AUBVtVNXwuiYN5dvUa6x5lD0D/YoKVjosnDyrP0PFcYacqGwnhvusyw9O/1VFLwPJa9H k09JNF6j6qJqR15AYdkj3UolN26B7Qx/zK/U7ASq8D5HEmRPW70D6FTZj7fwrmRa+mf+ 9bpZ3w0QpXT7BeXE5CWkZ1ud/BnU22Fre5XBTW18SOfMCP2+p0L1S7qsyEHlFIY+TzXn p9qQ== X-Gm-Message-State: AOAM530fmj8ihhYfvdCzhUbMjKRIcETo2pzK0IOICGdXJ4Pf11wmzm1z FP4uw8aP7Juh9i0Oexq1UZM= X-Google-Smtp-Source: ABdhPJwTIn+Zlb1Kqloce2TlRPCkx4+Co1ANWnnxufvqYpaM1W9Lzv+Ya+GACU5LYSwib1Le8IVO6g== X-Received: by 2002:a05:600c:2053:: with SMTP id p19mr2762091wmg.87.1614848237933; Thu, 04 Mar 2021 00:57:17 -0800 (PST) Received: from skynet.lan (170.red-88-1-105.dynamicip.rima-tde.net. [88.1.105.170]) by smtp.gmail.com with ESMTPSA id q15sm2828976wrx.56.2021.03.04.00.57.17 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 04 Mar 2021 00:57:17 -0800 (PST) From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?= To: Linus Walleij , Rob Herring , Michael Walle , Bartosz Golaszewski , Florian Fainelli , bcm-kernel-feedback-list@broadcom.com, =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez?= =?utf-8?q?_Rojas?= , Jonas Gorski , Necip Fazil Yildiran , Andy Shevchenko , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 04/15] Documentation: add BCM6328 pincontroller binding documentation Date: Thu, 4 Mar 2021 09:56:59 +0100 Message-Id: <20210304085710.7128-5-noltari@gmail.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20210304085710.7128-1-noltari@gmail.com> References: <20210304085710.7128-1-noltari@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add binding documentation for the pincontrol core found in BCM6328 SoCs. Signed-off-by: Álvaro Fernández Rojas Signed-off-by: Jonas Gorski --- v4: no changes v3: add new gpio node v2: remove interrupts .../pinctrl/brcm,bcm6328-pinctrl.yaml | 171 ++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml new file mode 100644 index 000000000000..d4e3c7897f19 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6328 pin controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +description: |+ + The pin controller node should be the child of a syscon node. + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.yaml + +properties: + compatible: + const: brcm,bcm6328-pinctrl + +patternProperties: + '^gpio$': + type: object + properties: + compatible: + const: brcm,bcm6328-gpio + + data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in the register map for the data register (in bytes). + + dirout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in the register map for the dirout register (in bytes). + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - gpio-ranges + - '#gpio-cells' + + '^.*$': + if: + type: object + then: + properties: + function: + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq, + led, ephy0_act_led, ephy1_act_led, ephy2_act_led, + ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ] + + pins: + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19, + gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, + usb_port1 ] + +required: + - compatible + +additionalProperties: false + +examples: + - | + gpio_cntl@10000080 { + compatible = "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + + pinctrl: pinctrl { + compatible = "brcm,bcm6328-pinctrl"; + + gpio { + compatible = "brcm,bcm6328-gpio"; + data = <0xc>; + dirout = <0x4>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + }; + + pinctrl_serial_led: serial_led { + pinctrl_serial_led_data: serial_led_data { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led { + function = "inet_act_led"; + pins = "gpio11"; + }; + + pinctrl_pcie_clkreq: pcie_clkreq { + function = "pcie_clkreq"; + pins = "gpio16"; + }; + + pinctrl_ephy0_spd_led: ephy0_spd_led { + function = "led"; + pins = "gpio17"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led { + function = "led"; + pins = "gpio18"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led { + function = "led"; + pins = "gpio19"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led { + function = "led"; + pins = "gpio20"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led { + function = "ephy0_act_led"; + pins = "gpio25"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led { + function = "ephy1_act_led"; + pins = "gpio26"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led { + function = "ephy2_act_led"; + pins = "gpio27"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led { + function = "ephy3_act_led"; + pins = "gpio28"; + }; + + pinctrl_hsspi_cs1: hsspi_cs1 { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; + + pinctrl_usb_port1_device: usb_port1_device { + function = "usb_device_port"; + pins = "usb_port1"; + }; + + pinctrl_usb_port1_host: usb_port1_host { + function = "usb_host_port"; + pins = "usb_port1"; + }; + }; + };