From patchwork Wed Mar 3 13:26:18 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Geert Uytterhoeven X-Patchwork-Id: 1446983 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4DrWzd196Rz9sR4 for ; Thu, 4 Mar 2021 11:32:45 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1444019AbhCDAcj (ORCPT ); Wed, 3 Mar 2021 19:32:39 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51310 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1348841AbhCCNgy (ORCPT ); Wed, 3 Mar 2021 08:36:54 -0500 Received: from michel.telenet-ops.be (michel.telenet-ops.be [IPv6:2a02:1800:110:4::f00:18]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 89EDEC061356 for ; Wed, 3 Mar 2021 05:26:28 -0800 (PST) Received: from ramsan.of.borg ([IPv6:2a02:1810:ac12:ed20:cd47:42a6:c822:e50b]) by michel.telenet-ops.be with bizsmtp id bpSR2400P4huzR806pSRhp; Wed, 03 Mar 2021 14:26:26 +0100 Received: from rox.of.borg ([192.168.97.57]) by ramsan.of.borg with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.93) (envelope-from ) id 1lHRWD-004Ps5-H9; Wed, 03 Mar 2021 14:26:25 +0100 Received: from geert by rox.of.borg with local (Exim 4.93) (envelope-from ) id 1lHRWC-00GWVQ-Pg; Wed, 03 Mar 2021 14:26:24 +0100 From: Geert Uytterhoeven To: Linus Walleij Cc: Ulrich Hecht , Biju Das , linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org, Geert Uytterhoeven Subject: [PATCH 5/6] pinctrl: renesas: Add support for R-Car SoCs with pull-down only pins Date: Wed, 3 Mar 2021 14:26:18 +0100 Message-Id: <20210303132619.3938128-6-geert+renesas@glider.be> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20210303132619.3938128-1-geert+renesas@glider.be> References: <20210303132619.3938128-1-geert+renesas@glider.be> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Currently, the common R-Car bias handling supports pin controllers with either: 1. Separate pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD) registers, for controlling both pin pull-up and pin pull-down, 2. A single pin Pull-Up control register (PUPR), for controlling pin pull-up. Add support for a variant of #2, where some bits in the single pin Pull-Up control register (PUPR) control pin pull-down instead of pin pull-up. This is the case for the "ASEBRK#/ACK" pin on R-Car M2-W, M2-N, and E2, and the "ACK" pin on RZ/G1M, RZ/G1N, RZ/G1E, and RZ/G1C. To describe such a register, SoC-specific drivers need to provide two instances of pinmux_bias_reg: a first one with the puen field filled in, listing pins with pull-up functionality, and a second one with the pud field filled in, listing pins with pull-down functionality. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund --- drivers/pinctrl/renesas/pinctrl.c | 49 ++++++++++++++++++++----------- drivers/pinctrl/renesas/sh_pfc.h | 4 +-- 2 files changed, 34 insertions(+), 19 deletions(-) diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c index b7ebbc877b544305..bb488af298623407 100644 --- a/drivers/pinctrl/renesas/pinctrl.c +++ b/drivers/pinctrl/renesas/pinctrl.c @@ -847,7 +847,7 @@ rcar_pin_to_bias_reg(const struct sh_pfc *pfc, unsigned int pin, { unsigned int i, j; - for (i = 0; pfc->info->bias_regs[i].puen; i++) { + for (i = 0; pfc->info->bias_regs[i].puen || pfc->info->bias_regs[i].pud; i++) { for (j = 0; j < ARRAY_SIZE(pfc->info->bias_regs[i].pins); j++) { if (pfc->info->bias_regs[i].pins[j] == pin) { *bit = j; @@ -870,12 +870,19 @@ unsigned int rcar_pinmux_get_bias(struct sh_pfc *pfc, unsigned int pin) if (!reg) return PIN_CONFIG_BIAS_DISABLE; - if (!(sh_pfc_read(pfc, reg->puen) & BIT(bit))) - return PIN_CONFIG_BIAS_DISABLE; - else if (!reg->pud || (sh_pfc_read(pfc, reg->pud) & BIT(bit))) - return PIN_CONFIG_BIAS_PULL_UP; - else - return PIN_CONFIG_BIAS_PULL_DOWN; + if (reg->puen) { + if (!(sh_pfc_read(pfc, reg->puen) & BIT(bit))) + return PIN_CONFIG_BIAS_DISABLE; + else if (!reg->pud || (sh_pfc_read(pfc, reg->pud) & BIT(bit))) + return PIN_CONFIG_BIAS_PULL_UP; + else + return PIN_CONFIG_BIAS_PULL_DOWN; + } else { + if (sh_pfc_read(pfc, reg->pud) & BIT(bit)) + return PIN_CONFIG_BIAS_PULL_DOWN; + else + return PIN_CONFIG_BIAS_DISABLE; + } } void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, @@ -889,19 +896,27 @@ void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, if (!reg) return; - enable = sh_pfc_read(pfc, reg->puen) & ~BIT(bit); - if (bias != PIN_CONFIG_BIAS_DISABLE) - enable |= BIT(bit); + if (reg->puen) { + enable = sh_pfc_read(pfc, reg->puen) & ~BIT(bit); + if (bias != PIN_CONFIG_BIAS_DISABLE) + enable |= BIT(bit); - if (reg->pud) { - updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); - if (bias == PIN_CONFIG_BIAS_PULL_UP) - updown |= BIT(bit); + if (reg->pud) { + updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); + if (bias == PIN_CONFIG_BIAS_PULL_UP) + updown |= BIT(bit); - sh_pfc_write(pfc, reg->pud, updown); - } + sh_pfc_write(pfc, reg->pud, updown); + } - sh_pfc_write(pfc, reg->puen, enable); + sh_pfc_write(pfc, reg->puen, enable); + } else { + enable = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); + if (bias == PIN_CONFIG_BIAS_PULL_DOWN) + enable |= BIT(bit); + + sh_pfc_write(pfc, reg->pud, enable); + } } #define PORTnCR_PULMD_OFF (0 << 6) diff --git a/drivers/pinctrl/renesas/sh_pfc.h b/drivers/pinctrl/renesas/sh_pfc.h index fc8391712af8cf4b..320898861c4b4c56 100644 --- a/drivers/pinctrl/renesas/sh_pfc.h +++ b/drivers/pinctrl/renesas/sh_pfc.h @@ -188,9 +188,9 @@ struct pinmux_drive_reg { .reg = r, \ .fields = -struct pinmux_bias_reg { +struct pinmux_bias_reg { /* At least one of puen/pud must exist */ u32 puen; /* Pull-enable or pull-up control register */ - u32 pud; /* Pull-up/down control register (optional) */ + u32 pud; /* Pull-up/down or pull-down control register */ const u16 pins[32]; };