diff mbox series

driver: aspeed: g6: Fix PWMG0 pinctrl setting

Message ID 20201211031741.23711-1-billy_tsai@aspeedtech.com
State New
Headers show
Series driver: aspeed: g6: Fix PWMG0 pinctrl setting | expand

Commit Message

Billy Tsai Dec. 11, 2020, 3:17 a.m. UTC
The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
SCU414 to SCU4B4.
Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits at
the same time.

Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 26 ++++++++++++++--------
 1 file changed, 17 insertions(+), 9 deletions(-)

Comments

Joel Stanley Dec. 11, 2020, 10:55 a.m. UTC | #1
On Fri, 11 Dec 2020 at 03:18, Billy Tsai <billy_tsai@aspeedtech.com> wrote:
>
> The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
> SCU414 to SCU4B4.
> Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits at
> the same time.
>
> Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
>
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> ---
>  drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 26 ++++++++++++++--------
>  1 file changed, 17 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> index 34803a6c7664..6e61f045936f 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> @@ -346,50 +346,58 @@ FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
>  FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
>
>  #define D22 40
> -SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
> -SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8));
> +SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8))

Is this missing a semicolon?

> +SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8),
> +                       SIG_DESC_CLEAR(SCU414, 8));
Billy Tsai Dec. 11, 2020, 11 a.m. UTC | #2
Hi Joel,

On 2020/12/11, 6:55 PM, Joel Stanley wrote:

    On Fri, 11 Dec 2020 at 03:18, Billy Tsai <billy_tsai@aspeedtech.com> wrote:
    >
    > The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
    > SCU414 to SCU4B4.
    > Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits at
    > the same time.
    >
    > Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
    >
    > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
    > ---
    >  drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 26 ++++++++++++++--------
    >  1 file changed, 17 insertions(+), 9 deletions(-)
    >
    > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > index 34803a6c7664..6e61f045936f 100644
    > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > @@ -346,50 +346,58 @@ FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
    >  FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
    >
    >  #define D22 40
    > -SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
    > -SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8));
    > +SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8))
    
    Is this missing a semicolon?

Yes, thanks for your check. I will send v2 to fix it.
    
    > +SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8),
    > +                       SIG_DESC_CLEAR(SCU414, 8));
diff mbox series

Patch

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 34803a6c7664..6e61f045936f 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -346,50 +346,58 @@  FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
 FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
 
 #define D22 40
-SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
-SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8));
+SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8))
+SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8),
+			SIG_DESC_CLEAR(SCU414, 8));
 PIN_DECL_2(D22, GPIOF0, SD1CLK, PWM8);
 GROUP_DECL(PWM8G0, D22);
 
 #define E22 41
 SIG_EXPR_LIST_DECL_SESG(E22, SD1CMD, SD1, SIG_DESC_SET(SCU414, 9));
-SIG_EXPR_LIST_DECL_SEMG(E22, PWM9, PWM9G0, PWM9, SIG_DESC_SET(SCU4B4, 9));
+SIG_EXPR_LIST_DECL_SEMG(E22, PWM9, PWM9G0, PWM9, SIG_DESC_SET(SCU4B4, 9),
+			SIG_DESC_CLEAR(SCU414, 9));
 PIN_DECL_2(E22, GPIOF1, SD1CMD, PWM9);
 GROUP_DECL(PWM9G0, E22);
 
 #define D23 42
 SIG_EXPR_LIST_DECL_SESG(D23, SD1DAT0, SD1, SIG_DESC_SET(SCU414, 10));
-SIG_EXPR_LIST_DECL_SEMG(D23, PWM10, PWM10G0, PWM10, SIG_DESC_SET(SCU4B4, 10));
+SIG_EXPR_LIST_DECL_SEMG(D23, PWM10, PWM10G0, PWM10, SIG_DESC_SET(SCU4B4, 10),
+			SIG_DESC_CLEAR(SCU414, 10));
 PIN_DECL_2(D23, GPIOF2, SD1DAT0, PWM10);
 GROUP_DECL(PWM10G0, D23);
 
 #define C23 43
 SIG_EXPR_LIST_DECL_SESG(C23, SD1DAT1, SD1, SIG_DESC_SET(SCU414, 11));
-SIG_EXPR_LIST_DECL_SEMG(C23, PWM11, PWM11G0, PWM11, SIG_DESC_SET(SCU4B4, 11));
+SIG_EXPR_LIST_DECL_SEMG(C23, PWM11, PWM11G0, PWM11, SIG_DESC_SET(SCU4B4, 11),
+			SIG_DESC_CLEAR(SCU414, 11));
 PIN_DECL_2(C23, GPIOF3, SD1DAT1, PWM11);
 GROUP_DECL(PWM11G0, C23);
 
 #define C22 44
 SIG_EXPR_LIST_DECL_SESG(C22, SD1DAT2, SD1, SIG_DESC_SET(SCU414, 12));
-SIG_EXPR_LIST_DECL_SEMG(C22, PWM12, PWM12G0, PWM12, SIG_DESC_SET(SCU4B4, 12));
+SIG_EXPR_LIST_DECL_SEMG(C22, PWM12, PWM12G0, PWM12, SIG_DESC_SET(SCU4B4, 12),
+			SIG_DESC_CLEAR(SCU414, 12));
 PIN_DECL_2(C22, GPIOF4, SD1DAT2, PWM12);
 GROUP_DECL(PWM12G0, C22);
 
 #define A25 45
 SIG_EXPR_LIST_DECL_SESG(A25, SD1DAT3, SD1, SIG_DESC_SET(SCU414, 13));
-SIG_EXPR_LIST_DECL_SEMG(A25, PWM13, PWM13G0, PWM13, SIG_DESC_SET(SCU4B4, 13));
+SIG_EXPR_LIST_DECL_SEMG(A25, PWM13, PWM13G0, PWM13, SIG_DESC_SET(SCU4B4, 13),
+			SIG_DESC_CLEAR(SCU414, 13));
 PIN_DECL_2(A25, GPIOF5, SD1DAT3, PWM13);
 GROUP_DECL(PWM13G0, A25);
 
 #define A24 46
 SIG_EXPR_LIST_DECL_SESG(A24, SD1CD, SD1, SIG_DESC_SET(SCU414, 14));
-SIG_EXPR_LIST_DECL_SEMG(A24, PWM14, PWM14G0, PWM14, SIG_DESC_SET(SCU4B4, 14));
+SIG_EXPR_LIST_DECL_SEMG(A24, PWM14, PWM14G0, PWM14, SIG_DESC_SET(SCU4B4, 14),
+			SIG_DESC_CLEAR(SCU414, 14));
 PIN_DECL_2(A24, GPIOF6, SD1CD, PWM14);
 GROUP_DECL(PWM14G0, A24);
 
 #define A23 47
 SIG_EXPR_LIST_DECL_SESG(A23, SD1WP, SD1, SIG_DESC_SET(SCU414, 15));
-SIG_EXPR_LIST_DECL_SEMG(A23, PWM15, PWM15G0, PWM15, SIG_DESC_SET(SCU4B4, 15));
+SIG_EXPR_LIST_DECL_SEMG(A23, PWM15, PWM15G0, PWM15, SIG_DESC_SET(SCU4B4, 15),
+			SIG_DESC_CLEAR(SCU414, 15));
 PIN_DECL_2(A23, GPIOF7, SD1WP, PWM15);
 GROUP_DECL(PWM15G0, A23);