@@ -166,14 +166,14 @@ static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg |= BIT(DB_TMR_LARGE_OFF);
} else {
- pin_reg &= ~DB_CNTRl_MASK;
+ pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
ret = -EINVAL;
}
} else {
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
pin_reg &= ~DB_TMR_OUT_MASK;
- pin_reg &= ~DB_CNTRl_MASK;
+ pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
}
writel(pin_reg, gpio_dev->base + offset * 4);
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
The correct way to disable debounce filter is to clear bit 5 and 6 of the register. Cc: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/linux-gpio/df2c008b-e7b5-4fdd-42ea-4d1c62b52139@redhat.com/ Signed-off-by: Coiby Xu <coiby.xu@gmail.com> --- drivers/pinctrl/pinctrl-amd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)