diff mbox series

[2/4] gpio: rcar: Align register offsets

Message ID 20201028141504.1729093-3-geert+renesas@glider.be
State New
Headers show
Series gpio: rcar: Cleanups and improvements | expand

Commit Message

Geert Uytterhoeven Oct. 28, 2020, 2:15 p.m. UTC 
Improve readability by aligning the offsets in the register definitions.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/gpio/gpio-rcar.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index a75bbc9af1f14b06..a7fb0ec78e44a3ed 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -45,19 +45,19 @@  struct gpio_rcar_priv {
 	struct gpio_rcar_bank_info bank_info;
 };
 
-#define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */
-#define INOUTSEL 0x04	/* General Input/Output Switching Register */
-#define OUTDT 0x08	/* General Output Register */
-#define INDT 0x0c	/* General Input Register */
-#define INTDT 0x10	/* Interrupt Display Register */
-#define INTCLR 0x14	/* Interrupt Clear Register */
-#define INTMSK 0x18	/* Interrupt Mask Register */
-#define MSKCLR 0x1c	/* Interrupt Mask Clear Register */
-#define POSNEG 0x20	/* Positive/Negative Logic Select Register */
-#define EDGLEVEL 0x24	/* Edge/level Select Register */
-#define FILONOFF 0x28	/* Chattering Prevention On/Off Register */
-#define OUTDTSEL 0x40	/* Output Data Select Register */
-#define BOTHEDGE 0x4c	/* One Edge/Both Edge Select Register */
+#define IOINTSEL	0x00	/* General IO/Interrupt Switching Register */
+#define INOUTSEL	0x04	/* General Input/Output Switching Register */
+#define OUTDT		0x08	/* General Output Register */
+#define INDT		0x0c	/* General Input Register */
+#define INTDT		0x10	/* Interrupt Display Register */
+#define INTCLR		0x14	/* Interrupt Clear Register */
+#define INTMSK		0x18	/* Interrupt Mask Register */
+#define MSKCLR		0x1c	/* Interrupt Mask Clear Register */
+#define POSNEG		0x20	/* Positive/Negative Logic Select Register */
+#define EDGLEVEL	0x24	/* Edge/level Select Register */
+#define FILONOFF	0x28	/* Chattering Prevention On/Off Register */
+#define OUTDTSEL	0x40	/* Output Data Select Register */
+#define BOTHEDGE	0x4c	/* One Edge/Both Edge Select Register */
 
 #define RCAR_MAX_GPIO_PER_BANK		32