From patchwork Tue Sep 22 02:31:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kent Gibson X-Patchwork-Id: 1368720 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20161025 header.b=OY6ZzWbW; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4BwQSF1wVnz9sRR for ; Tue, 22 Sep 2020 12:37:01 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729983AbgIVChA (ORCPT ); Mon, 21 Sep 2020 22:37:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40756 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728750AbgIVCg7 (ORCPT ); Mon, 21 Sep 2020 22:36:59 -0400 Received: from mail-pj1-x1041.google.com (mail-pj1-x1041.google.com [IPv6:2607:f8b0:4864:20::1041]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C84DCC061755; Mon, 21 Sep 2020 19:36:59 -0700 (PDT) Received: by mail-pj1-x1041.google.com with SMTP id jw11so744655pjb.0; Mon, 21 Sep 2020 19:36:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=fUdV44j+aZOh9NjfP0p2CTGZmk4MYDgkv51zw4YvHxk=; b=OY6ZzWbW227SAZlaNjPyBjkAMad1mjpXzP/EL6uc17edPYdM6RJ4QInGYMVT0V1Gx/ t137iACzUWlgiPqtJ1NAAwhrydWIUOt6yOLbiXqosvaB0azikOIB46iA8GV64lM+BGmM Skj6zvLdGyWA6a3Awr44OLoXXt9bdJ3oRTtz1bvuXpF1aLH9hIkFFJZ+et80c94geIb9 DOXTJQ9xU7UwRDtsdGCEmpLBVo6t67RHsU+eKhlZo3a7Y+KMSK1yU+zjAfdxByX96zQ0 AkV/EPREoLxJ9sb1pudHZX2g1MCennwbrZN7aMqlRmcoGnCFJh7VH6tOFCS9bOimPBQR eOEQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=fUdV44j+aZOh9NjfP0p2CTGZmk4MYDgkv51zw4YvHxk=; b=QGqAzn6+WMvEVDqsPWrP/tcxkvxqmiKJqYRRLz5pukw6q5TnzMYDH37xMmcbG1NtUD /42aApaXD/DFOjJWyzT/5KtLBPbHe//1JeX+bO9R2+kjIfNo3T8M1z30LrkfYWNaB/oq HIizRqDfcO9auErQ5CwDzr1e+aPSXhAUTsuobHPncVGPnwJmVAAIOyTuWc6zzG7fjyyi UHgujkugNeS4fnzkw40Guwr9Il+fsp4GEFjasy0ziH0uax1+ohqkxr+GdGfWQjBqjJ8r wqhFpSmCkoXWMAXtyS+Cyq6/mjiB6qvOG6jsHNmtsJNyPg/Y7fSD6P9tq0M5yOWPtf8H vc/A== X-Gm-Message-State: AOAM530T1Xh5XM6WTbWhKUYrEaMxKtgfNZLowViwoyn/f7OgPTF1LlD0 DbUadU/6OpUPnZKggrd/E1iuBem/toaXxg== X-Google-Smtp-Source: ABdhPJwj7zkaGYwjMvFPv6ka2AnmX2yiAudhU4RrfVtt5ITCdDmtQw/Xq6TagP47YLb0tHFMN33QiA== X-Received: by 2002:a17:90b:889:: with SMTP id bj9mr1950441pjb.101.1600742218688; Mon, 21 Sep 2020 19:36:58 -0700 (PDT) Received: from sol.lan (106-69-189-59.dyn.iinet.net.au. [106.69.189.59]) by smtp.gmail.com with ESMTPSA id j19sm13321390pfi.51.2020.09.21.19.36.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 21 Sep 2020 19:36:57 -0700 (PDT) From: Kent Gibson To: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, bgolaszewski@baylibre.com, linus.walleij@linaro.org, andy.shevchenko@gmail.com Cc: arnd@arndb.de, Kent Gibson Subject: [PATCH v9 17/20] tools: gpio: port gpio-hammer to v2 uAPI Date: Tue, 22 Sep 2020 10:31:48 +0800 Message-Id: <20200922023151.387447-18-warthog618@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200922023151.387447-1-warthog618@gmail.com> References: <20200922023151.387447-1-warthog618@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Port the gpio-hammer tool to the latest GPIO uAPI. Signed-off-by: Kent Gibson --- tools/gpio/gpio-hammer.c | 32 +++++--- tools/gpio/gpio-utils.c | 164 ++++++++++++++++++++++++++++++++------- tools/gpio/gpio-utils.h | 46 ++++++++++- 3 files changed, 197 insertions(+), 45 deletions(-) diff --git a/tools/gpio/gpio-hammer.c b/tools/gpio/gpio-hammer.c index a2c7577fad5c..54fdf59dd320 100644 --- a/tools/gpio/gpio-hammer.c +++ b/tools/gpio/gpio-hammer.c @@ -25,23 +25,30 @@ int hammer_device(const char *device_name, unsigned int *lines, int num_lines, unsigned int loops) { - struct gpiohandle_data data; + struct gpio_v2_line_values values; + struct gpio_v2_line_config config; char swirr[] = "-\\|/"; int fd; int ret; int i, j; unsigned int iteration = 0; - memset(&data.values, 0, sizeof(data.values)); - ret = gpiotools_request_linehandle(device_name, lines, num_lines, - GPIOHANDLE_REQUEST_OUTPUT, &data, - "gpio-hammer"); + memset(&config, 0, sizeof(config)); + config.flags = GPIO_V2_LINE_FLAG_OUTPUT; + + ret = gpiotools_request_line(device_name, lines, num_lines, + &config, "gpio-hammer"); if (ret < 0) goto exit_error; else fd = ret; - ret = gpiotools_get_values(fd, &data); + values.mask = 0; + values.bits = 0; + for (i = 0; i < num_lines; i++) + gpiotools_set_bit(&values.mask, i); + + ret = gpiotools_get_values(fd, &values); if (ret < 0) goto exit_close_error; @@ -53,7 +60,7 @@ int hammer_device(const char *device_name, unsigned int *lines, int num_lines, } fprintf(stdout, "] on %s, initial states: [", device_name); for (i = 0; i < num_lines; i++) { - fprintf(stdout, "%d", data.values[i]); + fprintf(stdout, "%d", gpiotools_test_bit(values.bits, i)); if (i != (num_lines - 1)) fprintf(stdout, ", "); } @@ -64,14 +71,14 @@ int hammer_device(const char *device_name, unsigned int *lines, int num_lines, while (1) { /* Invert all lines so we blink */ for (i = 0; i < num_lines; i++) - data.values[i] = !data.values[i]; + gpiotools_change_bit(&values.bits, i); - ret = gpiotools_set_values(fd, &data); + ret = gpiotools_set_values(fd, &values); if (ret < 0) goto exit_close_error; /* Re-read values to get status */ - ret = gpiotools_get_values(fd, &data); + ret = gpiotools_get_values(fd, &values); if (ret < 0) goto exit_close_error; @@ -82,7 +89,8 @@ int hammer_device(const char *device_name, unsigned int *lines, int num_lines, fprintf(stdout, "["); for (i = 0; i < num_lines; i++) { - fprintf(stdout, "%d: %d", lines[i], data.values[i]); + fprintf(stdout, "%d: %d", lines[i], + gpiotools_test_bit(values.bits, i)); if (i != (num_lines - 1)) fprintf(stdout, ", "); } @@ -97,7 +105,7 @@ int hammer_device(const char *device_name, unsigned int *lines, int num_lines, ret = 0; exit_close_error: - gpiotools_release_linehandle(fd); + gpiotools_release_line(fd); exit_error: return ret; } diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c index d527980bcb94..37187e056c8b 100644 --- a/tools/gpio/gpio-utils.c +++ b/tools/gpio/gpio-utils.c @@ -100,20 +100,87 @@ int gpiotools_request_linehandle(const char *device_name, unsigned int *lines, free(chrdev_name); return ret < 0 ? ret : req.fd; } + +/** + * gpiotools_request_line() - request gpio lines in a gpiochip + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @num_lines: The number of lines to request. + * @config: The new config for requested gpio. Reference + * "linux/gpio.h" for config details. + * @consumer: The name of consumer, such as "sysfs", + * "powerkey". This is useful for other users to + * know who is using. + * + * Request gpio lines through the ioctl provided by chardev. User + * could call gpiotools_set_values() and gpiotools_get_values() to + * read and write respectively through the returned fd. Call + * gpiotools_release_line() to release these lines after that. + * + * Return: On success return the fd; + * On failure return the errno. + */ +int gpiotools_request_line(const char *device_name, unsigned int *lines, + unsigned int num_lines, + struct gpio_v2_line_config *config, + const char *consumer) +{ + struct gpio_v2_line_request req; + char *chrdev_name; + int fd; + int i; + int ret; + + ret = asprintf(&chrdev_name, "/dev/%s", device_name); + if (ret < 0) + return -ENOMEM; + + fd = open(chrdev_name, 0); + if (fd == -1) { + ret = -errno; + fprintf(stderr, "Failed to open %s, %s\n", + chrdev_name, strerror(errno)); + goto exit_free_name; + } + + memset(&req, 0, sizeof(req)); + for (i = 0; i < num_lines; i++) + req.offsets[i] = lines[i]; + + req.config = *config; + strcpy(req.consumer, consumer); + req.num_lines = num_lines; + + ret = ioctl(fd, GPIO_V2_GET_LINE_IOCTL, &req); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIO_GET_LINE_IOCTL", ret, strerror(errno)); + } + + if (close(fd) == -1) + perror("Failed to close GPIO character device file"); +exit_free_name: + free(chrdev_name); + return ret < 0 ? ret : req.fd; +} + /** * gpiotools_set_values(): Set the value of gpio(s) * @fd: The fd returned by - * gpiotools_request_linehandle(). - * @data: The array of values want to set. + * gpiotools_request_line(). + * @values: The array of values want to set. * * Return: On success return 0; * On failure return the errno. */ -int gpiotools_set_values(const int fd, struct gpiohandle_data *data) +int gpiotools_set_values(const int fd, struct gpio_v2_line_values *values) { int ret; - ret = ioctl(fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, data); + ret = ioctl(fd, GPIO_V2_LINE_SET_VALUES_IOCTL, values); if (ret == -1) { ret = -errno; fprintf(stderr, "Failed to issue %s (%d), %s\n", @@ -127,17 +194,17 @@ int gpiotools_set_values(const int fd, struct gpiohandle_data *data) /** * gpiotools_get_values(): Get the value of gpio(s) * @fd: The fd returned by - * gpiotools_request_linehandle(). - * @data: The array of values get from hardware. + * gpiotools_request_line(). + * @values: The array of values get from hardware. * * Return: On success return 0; * On failure return the errno. */ -int gpiotools_get_values(const int fd, struct gpiohandle_data *data) +int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values) { int ret; - ret = ioctl(fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, data); + ret = ioctl(fd, GPIO_V2_LINE_GET_VALUES_IOCTL, values); if (ret == -1) { ret = -errno; fprintf(stderr, "Failed to issue %s (%d), %s\n", @@ -169,6 +236,27 @@ int gpiotools_release_linehandle(const int fd) return ret; } +/** + * gpiotools_release_line(): Release the line(s) of gpiochip + * @fd: The fd returned by + * gpiotools_request_line(). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_release_line(const int fd) +{ + int ret; + + ret = close(fd); + if (ret == -1) { + perror("Failed to close GPIO LINE device file"); + ret = -errno; + } + + return ret; +} + /** * gpiotools_get(): Get value from specific line * @device_name: The name of gpiochip without prefix "/dev/", @@ -180,11 +268,14 @@ int gpiotools_release_linehandle(const int fd) */ int gpiotools_get(const char *device_name, unsigned int line) { - struct gpiohandle_data data; + int ret; + unsigned int value; unsigned int lines[] = {line}; - gpiotools_gets(device_name, lines, 1, &data); - return data.values[0]; + ret = gpiotools_gets(device_name, lines, 1, &value); + if (ret) + return ret; + return value; } @@ -195,27 +286,35 @@ int gpiotools_get(const char *device_name, unsigned int line) * @lines: An array desired lines, specified by offset * index for the associated GPIO device. * @num_lines: The number of lines to request. - * @data: The array of values get from gpiochip. + * @values: The array of values get from gpiochip. * * Return: On success return 0; * On failure return the errno. */ int gpiotools_gets(const char *device_name, unsigned int *lines, - unsigned int num_lines, struct gpiohandle_data *data) + unsigned int num_lines, unsigned int *values) { - int fd; + int fd, i; int ret; int ret_close; + struct gpio_v2_line_config config; + struct gpio_v2_line_values lv; - ret = gpiotools_request_linehandle(device_name, lines, num_lines, - GPIOHANDLE_REQUEST_INPUT, data, - CONSUMER); + memset(&config, 0, sizeof(config)); + config.flags = GPIO_V2_LINE_FLAG_INPUT; + ret = gpiotools_request_line(device_name, lines, num_lines, + &config, CONSUMER); if (ret < 0) return ret; fd = ret; - ret = gpiotools_get_values(fd, data); - ret_close = gpiotools_release_linehandle(fd); + for (i = 0; i < num_lines; i++) + gpiotools_set_bit(&lv.mask, i); + ret = gpiotools_get_values(fd, &lv); + if (!ret) + for (i = 0; i < num_lines; i++) + values[i] = gpiotools_test_bit(lv.bits, i); + ret_close = gpiotools_release_line(fd); return ret < 0 ? ret : ret_close; } @@ -232,11 +331,9 @@ int gpiotools_gets(const char *device_name, unsigned int *lines, int gpiotools_set(const char *device_name, unsigned int line, unsigned int value) { - struct gpiohandle_data data; unsigned int lines[] = {line}; - data.values[0] = value; - return gpiotools_sets(device_name, lines, 1, &data); + return gpiotools_sets(device_name, lines, 1, &value); } /** @@ -246,22 +343,31 @@ int gpiotools_set(const char *device_name, unsigned int line, * @lines: An array desired lines, specified by offset * index for the associated GPIO device. * @num_lines: The number of lines to request. - * @data: The array of values set to gpiochip, must be + * @value: The array of values set to gpiochip, must be * 0(low) or 1(high). * * Return: On success return 0; * On failure return the errno. */ int gpiotools_sets(const char *device_name, unsigned int *lines, - unsigned int num_lines, struct gpiohandle_data *data) + unsigned int num_lines, unsigned int *values) { - int ret; + int ret, i; + struct gpio_v2_line_config config; - ret = gpiotools_request_linehandle(device_name, lines, num_lines, - GPIOHANDLE_REQUEST_OUTPUT, data, - CONSUMER); + memset(&config, 0, sizeof(config)); + config.flags = GPIO_V2_LINE_FLAG_OUTPUT; + config.num_attrs = 1; + config.attrs[0].attr.id = GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES; + for (i = 0; i < num_lines; i++) { + gpiotools_set_bit(&config.attrs[0].mask, i); + gpiotools_assign_bit(&config.attrs[0].attr.values, + i, values[i]); + } + ret = gpiotools_request_line(device_name, lines, num_lines, + &config, CONSUMER); if (ret < 0) return ret; - return gpiotools_release_linehandle(ret); + return gpiotools_release_line(ret); } diff --git a/tools/gpio/gpio-utils.h b/tools/gpio/gpio-utils.h index 324729577865..f8ea4fac14d5 100644 --- a/tools/gpio/gpio-utils.h +++ b/tools/gpio/gpio-utils.h @@ -12,7 +12,9 @@ #ifndef _GPIO_UTILS_H_ #define _GPIO_UTILS_H_ +#include #include +#include #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) @@ -26,16 +28,52 @@ int gpiotools_request_linehandle(const char *device_name, unsigned int *lines, unsigned int num_lines, unsigned int flag, struct gpiohandle_data *data, const char *consumer_label); -int gpiotools_set_values(const int fd, struct gpiohandle_data *data); -int gpiotools_get_values(const int fd, struct gpiohandle_data *data); int gpiotools_release_linehandle(const int fd); +int gpiotools_request_line(const char *device_name, + unsigned int *lines, + unsigned int num_lines, + struct gpio_v2_line_config *config, + const char *consumer); +int gpiotools_set_values(const int fd, struct gpio_v2_line_values *values); +int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values); +int gpiotools_release_line(const int fd); + int gpiotools_get(const char *device_name, unsigned int line); int gpiotools_gets(const char *device_name, unsigned int *lines, - unsigned int num_lines, struct gpiohandle_data *data); + unsigned int num_lines, unsigned int *values); int gpiotools_set(const char *device_name, unsigned int line, unsigned int value); int gpiotools_sets(const char *device_name, unsigned int *lines, - unsigned int num_lines, struct gpiohandle_data *data); + unsigned int num_lines, unsigned int *values); + +/* helper functions for gpio_v2_line_values bits */ +static inline void gpiotools_set_bit(__u64 *b, int n) +{ + *b |= 1ULL << n; +} + +static inline void gpiotools_change_bit(__u64 *b, int n) +{ + *b ^= 1ULL << n; +} + +static inline void gpiotools_clear_bit(__u64 *b, int n) +{ + *b &= ~(1ULL << n); +} + +static inline int gpiotools_test_bit(__u64 b, int n) +{ + return !!(b & 1ULL << n); +} + +static inline void gpiotools_assign_bit(__u64 *b, int n, bool value) +{ + if (value) + gpiotools_set_bit(b, n); + else + gpiotools_clear_bit(b, n); +} #endif /* _GPIO_UTILS_H_ */