diff mbox series

[3/3] arm64: dts: sparx5: Add SGPIO devices

Message ID 20200513141134.25819-4-lars.povlsen@microchip.com
State New
Headers show
Series pinctrl: Adding support for Microchip serial GPIO controller | expand

Commit Message

Lars Povlsen May 13, 2020, 2:11 p.m. UTC
This adds SGPIO devices for the Sparx5 SoC and configures it for the
applicable reference boards.

Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi     | 52 +++++++++++++++++++
 .../boot/dts/microchip/sparx5_pcb125.dts      |  5 ++
 .../dts/microchip/sparx5_pcb134_board.dtsi    |  5 ++
 3 files changed, 62 insertions(+)

--
2.26.2
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 60629861a5157..b4fda5616536c 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -213,6 +213,22 @@  si2_pins: si2-pins {
 				function = "si2";
 			};

+			sgpio0_pins: sgpio-pins {
+				pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+				function = "sg0";
+			};
+
+			sgpio1_pins: sgpio1-pins {
+				pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
+				function = "sg1";
+			};
+
+			sgpio2_pins: sgpio2-pins {
+				pins = "GPIO_30", "GPIO_31", "GPIO_32",
+				       "GPIO_33";
+				function = "sg2";
+			};
+
 			uart_pins: uart-pins {
 				pins = "GPIO_10", "GPIO_11";
 				function = "uart";
@@ -243,6 +259,42 @@  emmc_pins: emmc-pins {
 			};
 		};

+		sgpio0: gpio@61101036c {
+			compatible = "mscc,ocelot-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio0_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x1101036c 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 64 64>;
+		};
+
+		sgpio1: gpio@611010484 {
+			compatible = "mscc,ocelot-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio1_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x11010484 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 128 64>;
+		};
+
+		sgpio2: gpio@61101059c {
+			compatible = "mscc,ocelot-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio2_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x1101059c 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 192 64>;
+		};
+
 		i2c0: i2c@600101000 {
 			compatible = "snps,designware-i2c";
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
index 94c4c3fd5a786..fd4f5b3ddcc49 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -55,6 +55,11 @@  spi-flash@1 {
 	};
 };

+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-ports = <0x00FFFFFF>;
+};
+
 &i2c1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 628a05d3f57ce..2f781258f8c99 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -47,6 +47,11 @@  spi-flash@0 {
 	};
 };

+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-ports = <0x00FFFFFF>;
+};
+
 &gpio {
 	i2cmux_pins_i: i2cmux-pins-i {
 	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",