diff mbox series

[libgpiod,v3,13/14] tools: add support for bias flags

Message ID 20191125143157.26154-14-warthog618@gmail.com
State New
Headers show
Series Add support for bias flags and SET_CONFIG | expand

Commit Message

Kent Gibson Nov. 25, 2019, 2:31 p.m. UTC 
Add support for bias flags to applicable tools - gpioget, gpioset, and
gpiomon.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 tools/gpioget.c | 32 +++++++++++++++++++++++++----
 tools/gpiomon.c | 36 +++++++++++++++++++++++++++------
 tools/gpioset.c | 54 ++++++++++++++++++++++++++++++++++++++++++++-----
 3 files changed, 107 insertions(+), 15 deletions(-)

Comments

Bartosz Golaszewski Nov. 28, 2019, 10:29 a.m. UTC | #1 
pon., 25 lis 2019 o 15:33 Kent Gibson <warthog618@gmail.com> napisał(a):
>
> Add support for bias flags to applicable tools - gpioget, gpioset, and
> gpiomon.
>
> Signed-off-by: Kent Gibson <warthog618@gmail.com>
> ---
>  tools/gpioget.c | 32 +++++++++++++++++++++++++----
>  tools/gpiomon.c | 36 +++++++++++++++++++++++++++------
>  tools/gpioset.c | 54 ++++++++++++++++++++++++++++++++++++++++++++-----
>  3 files changed, 107 insertions(+), 15 deletions(-)
>
> diff --git a/tools/gpioget.c b/tools/gpioget.c
> index 196ebeb..17614cb 100644
> --- a/tools/gpioget.c
> +++ b/tools/gpioget.c
> @@ -17,10 +17,11 @@ static const struct option longopts[] = {
>         { "help",       no_argument,    NULL,   'h' },
>         { "version",    no_argument,    NULL,   'v' },
>         { "active-low", no_argument,    NULL,   'l' },
> +       { "bias", required_argument,    NULL,   'B' },
>         { GETOPT_NULL_LONGOPT },
>  };
>
> -static const char *const shortopts = "+hvl";
> +static const char *const shortopts = "+hvlB:";
>
>  static void print_help(void)
>  {
> @@ -32,6 +33,25 @@ static void print_help(void)
>         printf("  -h, --help:\t\tdisplay this message and exit\n");
>         printf("  -v, --version:\tdisplay the version and exit\n");
>         printf("  -l, --active-low:\tset the line active state to low\n");
> +       printf("  -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n");
> +       printf("                set the line bias\n");
> +       printf("\n");
> +       printf("Biases:\n");
> +       printf("  as-is:\tleave bias unchanged\n");
> +       printf("  disable:\tdisable bias\n");
> +       printf("  pull-up:\tenable pull-up\n");
> +       printf("  pull-down:\tenable pull-down\n");
> +}
> +
> +static int bias_flags(const char *option)
> +{
> +       if (strcmp(option, "pull-down") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN;
> +       if (strcmp(option, "pull-up") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_PULL_UP;
> +       if (strcmp(option, "disable") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_DISABLE;
> +       return 0;
>  }
>
>  int main(int argc, char **argv)
> @@ -39,6 +59,7 @@ int main(int argc, char **argv)
>         unsigned int *offsets, i, num_lines;
>         int *values, optc, opti, rv;
>         bool active_low = false;
> +       int flags = 0;
>         char *device, *end;
>
>         for (;;) {
> @@ -56,6 +77,9 @@ int main(int argc, char **argv)
>                 case 'l':
>                         active_low = true;
>                         break;
> +               case 'B':
> +                       flags = bias_flags(optarg);
> +                       break;
>                 case '?':
>                         die("try %s --help", get_progname());
>                 default:
> @@ -86,9 +110,9 @@ int main(int argc, char **argv)
>                         die("invalid GPIO offset: %s", argv[i + 1]);
>         }
>
> -       rv = gpiod_ctxless_get_value_multiple(device, offsets, values,
> -                                             num_lines, active_low,
> -                                             "gpioget");
> +       rv = gpiod_ctxless_get_value_multiple_ext(device, offsets, values,
> +                                                 num_lines, active_low,
> +                                                 "gpioget", flags);
>         if (rv < 0)
>                 die_perror("error reading GPIO values");
>
> diff --git a/tools/gpiomon.c b/tools/gpiomon.c
> index 9a1843b..687212d 100644
> --- a/tools/gpiomon.c
> +++ b/tools/gpiomon.c
> @@ -22,6 +22,7 @@ static const struct option longopts[] = {
>         { "help",               no_argument,            NULL,   'h' },
>         { "version",            no_argument,            NULL,   'v' },
>         { "active-low",         no_argument,            NULL,   'l' },
> +       { "bias",               required_argument,      NULL,   'B' },
>         { "num-events",         required_argument,      NULL,   'n' },
>         { "silent",             no_argument,            NULL,   's' },
>         { "rising-edge",        no_argument,            NULL,   'r' },
> @@ -31,7 +32,7 @@ static const struct option longopts[] = {
>         { GETOPT_NULL_LONGOPT },
>  };
>
> -static const char *const shortopts = "+hvln:srfbF:";
> +static const char *const shortopts = "+hvlB:n:srfbF:";
>
>  static void print_help(void)
>  {
> @@ -43,6 +44,8 @@ static void print_help(void)
>         printf("  -h, --help:\t\tdisplay this message and exit\n");
>         printf("  -v, --version:\tdisplay the version and exit\n");
>         printf("  -l, --active-low:\tset the line active state to low\n");
> +       printf("  -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n");
> +       printf("                set the line bias\n");
>         printf("  -n, --num-events=NUM:\texit after processing NUM events\n");
>         printf("  -s, --silent:\t\tdon't print event info\n");
>         printf("  -r, --rising-edge:\tonly process rising edge events\n");
> @@ -50,6 +53,12 @@ static void print_help(void)
>         printf("  -b, --line-buffered:\tset standard output as line buffered\n");
>         printf("  -F, --format=FMT\tspecify custom output format\n");
>         printf("\n");
> +       printf("Biases:\n");
> +       printf("  as-is:\tleave bias unchanged\n");
> +       printf("  disable:\tdisable bias\n");
> +       printf("  pull-up:\tenable pull-up\n");
> +       printf("  pull-down:\tenable pull-down\n");
> +       printf("\n");
>         printf("Format specifiers:\n");
>         printf("  %%o:  GPIO line offset\n");
>         printf("  %%e:  event type (0 - falling edge, 1 rising edge)\n");
> @@ -240,10 +249,22 @@ static int make_signalfd(void)
>         return sigfd;
>  }
>
> +static int bias_flags(const char *option)
> +{
> +       if (strcmp(option, "pull-down") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN;
> +       if (strcmp(option, "pull-up") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_PULL_UP;
> +       if (strcmp(option, "disable") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_DISABLE;
> +       return 0;

Does it mean that any other string would be interpreted as 'as-is'?
I'd prefer it to bail out on invalid value.

> +}
> +
>  int main(int argc, char **argv)
>  {
>         unsigned int offsets[GPIOD_LINE_BULK_MAX_LINES], num_lines = 0, offset;
>         bool active_low = false, watch_rising = false, watch_falling = false;
> +       int flags = 0;
>         struct timespec timeout = { 10, 0 };
>         int optc, opti, rv, i, event_type;
>         struct mon_ctx ctx;
> @@ -266,6 +287,9 @@ int main(int argc, char **argv)
>                 case 'l':
>                         active_low = true;
>                         break;
> +               case 'B':
> +                       flags = bias_flags(optarg);
> +                       break;
>                 case 'n':
>                         ctx.events_wanted = strtoul(optarg, &end, 10);
>                         if (*end != '\0')
> @@ -320,11 +344,11 @@ int main(int argc, char **argv)
>
>         ctx.sigfd = make_signalfd();
>
> -       rv = gpiod_ctxless_event_monitor_multiple(argv[0], event_type,
> -                                                 offsets, num_lines,
> -                                                 active_low, "gpiomon",
> -                                                 &timeout, poll_callback,
> -                                                 event_callback, &ctx);
> +       rv = gpiod_ctxless_event_monitor_multiple_ext(
> +                               argv[0], event_type, offsets,
> +                               num_lines, active_low, "gpiomon",
> +                               &timeout, poll_callback,
> +                               event_callback, &ctx, flags);
>         if (rv)
>                 die_perror("error waiting for events");
>
> diff --git a/tools/gpioset.c b/tools/gpioset.c
> index d9977a7..b91baea 100644
> --- a/tools/gpioset.c
> +++ b/tools/gpioset.c
> @@ -23,6 +23,8 @@ static const struct option longopts[] = {
>         { "help",               no_argument,            NULL,   'h' },
>         { "version",            no_argument,            NULL,   'v' },
>         { "active-low",         no_argument,            NULL,   'l' },
> +       { "bias",               required_argument,      NULL,   'B' },
> +       { "drive",              required_argument,      NULL,   'D' },
>         { "mode",               required_argument,      NULL,   'm' },
>         { "sec",                required_argument,      NULL,   's' },
>         { "usec",               required_argument,      NULL,   'u' },
> @@ -30,7 +32,7 @@ static const struct option longopts[] = {
>         { GETOPT_NULL_LONGOPT },
>  };
>
> -static const char *const shortopts = "+hvlm:s:u:b";
> +static const char *const shortopts = "+hvlB:D:m:s:u:b";
>
>  static void print_help(void)
>  {
> @@ -42,12 +44,27 @@ static void print_help(void)
>         printf("  -h, --help:\t\tdisplay this message and exit\n");
>         printf("  -v, --version:\tdisplay the version and exit\n");
>         printf("  -l, --active-low:\tset the line active state to low\n");
> +       printf("  -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n");
> +       printf("                set the line bias\n");
> +       printf("  -D, --drive=[push-pull|open-drain|open-source] (defaults to 'push-pull'):\n");
> +       printf("                set the line drive mode\n");
>         printf("  -m, --mode=[exit|wait|time|signal] (defaults to 'exit'):\n");
>         printf("                tell the program what to do after setting values\n");
>         printf("  -s, --sec=SEC:\tspecify the number of seconds to wait (only valid for --mode=time)\n");
>         printf("  -u, --usec=USEC:\tspecify the number of microseconds to wait (only valid for --mode=time)\n");
>         printf("  -b, --background:\tafter setting values: detach from the controlling terminal\n");
>         printf("\n");
> +       printf("Biases:\n");
> +       printf("  as-is:\tleave bias unchanged\n");
> +       printf("  disable:\tdisable bias\n");
> +       printf("  pull-up:\tenable pull-up\n");
> +       printf("  pull-down:\tenable pull-down\n");
> +       printf("\n");
> +       printf("Drives:\n");
> +       printf("  push-pull:\tdrive the line both high and low\n");
> +       printf("  open-drain:\tdrive the line low or go high impedance\n");
> +       printf("  open-source:\tdrive the line high or go high impedance\n");
> +       printf("\n");
>         printf("Modes:\n");
>         printf("  exit:\t\tset values and exit immediately\n");
>         printf("  wait:\t\tset values and wait for user to press ENTER\n");
> @@ -178,11 +195,31 @@ static const struct mode_mapping *parse_mode(const char *mode)
>         return NULL;
>  }
>
> +static int bias_flags(const char *option)
> +{
> +       if (strcmp(option, "pull-down") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN;
> +       if (strcmp(option, "pull-up") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_PULL_UP;
> +       if (strcmp(option, "disable") == 0)
> +               return GPIOD_CTXLESS_FLAG_BIAS_DISABLE;
> +       return 0;
> +}
> +
> +static int drive_flags(const char *option)
> +{
> +       if (strcmp(option, "open-drain") == 0)
> +               return GPIOD_CTXLESS_FLAG_OPEN_DRAIN;
> +       if (strcmp(option, "open-source") == 0)
> +               return GPIOD_CTXLESS_FLAG_OPEN_SOURCE;
> +       return 0;

Thanks for doing this, but please put it into a separate commit that
adds support for drive flags.


> +}
> +
>  int main(int argc, char **argv)
>  {
>         const struct mode_mapping *mode = &modes[MODE_EXIT];
>         unsigned int *offsets, num_lines, i;
> -       int *values, rv, optc, opti;
> +       int *values, rv, optc, opti, flags = 0;
>         struct callback_data cbdata;
>         bool active_low = false;
>         char *device, *end;
> @@ -204,6 +241,12 @@ int main(int argc, char **argv)
>                 case 'l':
>                         active_low = true;
>                         break;
> +               case 'B':
> +                       flags |= bias_flags(optarg);
> +                       break;
> +               case 'D':
> +                       flags |= drive_flags(optarg);
> +                       break;
>                 case 'm':
>                         mode = parse_mode(optarg);
>                         if (!mode)
> @@ -268,9 +311,10 @@ int main(int argc, char **argv)
>                         die("invalid offset: %s", argv[i + 1]);
>         }
>
> -       rv = gpiod_ctxless_set_value_multiple(device, offsets, values,
> -                                             num_lines, active_low, "gpioset",
> -                                             mode->callback, &cbdata);
> +       rv = gpiod_ctxless_set_value_multiple_ext(
> +                               device, offsets, values,
> +                               num_lines, active_low, "gpioset",
> +                               mode->callback, &cbdata, flags);
>         if (rv < 0)
>                 die_perror("error setting the GPIO line values");
>
> --
> 2.24.0
>
diff mbox series

Patch

diff --git a/tools/gpioget.c b/tools/gpioget.c
index 196ebeb..17614cb 100644
--- a/tools/gpioget.c
+++ b/tools/gpioget.c
@@ -17,10 +17,11 @@  static const struct option longopts[] = {
 	{ "help",	no_argument,	NULL,	'h' },
 	{ "version",	no_argument,	NULL,	'v' },
 	{ "active-low",	no_argument,	NULL,	'l' },
+	{ "bias", required_argument,	NULL,	'B' },
 	{ GETOPT_NULL_LONGOPT },
 };
 
-static const char *const shortopts = "+hvl";
+static const char *const shortopts = "+hvlB:";
 
 static void print_help(void)
 {
@@ -32,6 +33,25 @@  static void print_help(void)
 	printf("  -h, --help:\t\tdisplay this message and exit\n");
 	printf("  -v, --version:\tdisplay the version and exit\n");
 	printf("  -l, --active-low:\tset the line active state to low\n");
+	printf("  -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n");
+	printf("		set the line bias\n");
+	printf("\n");
+	printf("Biases:\n");
+	printf("  as-is:\tleave bias unchanged\n");
+	printf("  disable:\tdisable bias\n");
+	printf("  pull-up:\tenable pull-up\n");
+	printf("  pull-down:\tenable pull-down\n");
+}
+
+static int bias_flags(const char *option)
+{
+	if (strcmp(option, "pull-down") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN;
+	if (strcmp(option, "pull-up") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_PULL_UP;
+	if (strcmp(option, "disable") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_DISABLE;
+	return 0;
 }
 
 int main(int argc, char **argv)
@@ -39,6 +59,7 @@  int main(int argc, char **argv)
 	unsigned int *offsets, i, num_lines;
 	int *values, optc, opti, rv;
 	bool active_low = false;
+	int flags = 0;
 	char *device, *end;
 
 	for (;;) {
@@ -56,6 +77,9 @@  int main(int argc, char **argv)
 		case 'l':
 			active_low = true;
 			break;
+		case 'B':
+			flags = bias_flags(optarg);
+			break;
 		case '?':
 			die("try %s --help", get_progname());
 		default:
@@ -86,9 +110,9 @@  int main(int argc, char **argv)
 			die("invalid GPIO offset: %s", argv[i + 1]);
 	}
 
-	rv = gpiod_ctxless_get_value_multiple(device, offsets, values,
-					      num_lines, active_low,
-					      "gpioget");
+	rv = gpiod_ctxless_get_value_multiple_ext(device, offsets, values,
+						  num_lines, active_low,
+						  "gpioget", flags);
 	if (rv < 0)
 		die_perror("error reading GPIO values");
 
diff --git a/tools/gpiomon.c b/tools/gpiomon.c
index 9a1843b..687212d 100644
--- a/tools/gpiomon.c
+++ b/tools/gpiomon.c
@@ -22,6 +22,7 @@  static const struct option longopts[] = {
 	{ "help",		no_argument,		NULL,	'h' },
 	{ "version",		no_argument,		NULL,	'v' },
 	{ "active-low",		no_argument,		NULL,	'l' },
+	{ "bias",		required_argument,	NULL,	'B' },
 	{ "num-events",		required_argument,	NULL,	'n' },
 	{ "silent",		no_argument,		NULL,	's' },
 	{ "rising-edge",	no_argument,		NULL,	'r' },
@@ -31,7 +32,7 @@  static const struct option longopts[] = {
 	{ GETOPT_NULL_LONGOPT },
 };
 
-static const char *const shortopts = "+hvln:srfbF:";
+static const char *const shortopts = "+hvlB:n:srfbF:";
 
 static void print_help(void)
 {
@@ -43,6 +44,8 @@  static void print_help(void)
 	printf("  -h, --help:\t\tdisplay this message and exit\n");
 	printf("  -v, --version:\tdisplay the version and exit\n");
 	printf("  -l, --active-low:\tset the line active state to low\n");
+	printf("  -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n");
+	printf("		set the line bias\n");
 	printf("  -n, --num-events=NUM:\texit after processing NUM events\n");
 	printf("  -s, --silent:\t\tdon't print event info\n");
 	printf("  -r, --rising-edge:\tonly process rising edge events\n");
@@ -50,6 +53,12 @@  static void print_help(void)
 	printf("  -b, --line-buffered:\tset standard output as line buffered\n");
 	printf("  -F, --format=FMT\tspecify custom output format\n");
 	printf("\n");
+	printf("Biases:\n");
+	printf("  as-is:\tleave bias unchanged\n");
+	printf("  disable:\tdisable bias\n");
+	printf("  pull-up:\tenable pull-up\n");
+	printf("  pull-down:\tenable pull-down\n");
+	printf("\n");
 	printf("Format specifiers:\n");
 	printf("  %%o:  GPIO line offset\n");
 	printf("  %%e:  event type (0 - falling edge, 1 rising edge)\n");
@@ -240,10 +249,22 @@  static int make_signalfd(void)
 	return sigfd;
 }
 
+static int bias_flags(const char *option)
+{
+	if (strcmp(option, "pull-down") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN;
+	if (strcmp(option, "pull-up") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_PULL_UP;
+	if (strcmp(option, "disable") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_DISABLE;
+	return 0;
+}
+
 int main(int argc, char **argv)
 {
 	unsigned int offsets[GPIOD_LINE_BULK_MAX_LINES], num_lines = 0, offset;
 	bool active_low = false, watch_rising = false, watch_falling = false;
+	int flags = 0;
 	struct timespec timeout = { 10, 0 };
 	int optc, opti, rv, i, event_type;
 	struct mon_ctx ctx;
@@ -266,6 +287,9 @@  int main(int argc, char **argv)
 		case 'l':
 			active_low = true;
 			break;
+		case 'B':
+			flags = bias_flags(optarg);
+			break;
 		case 'n':
 			ctx.events_wanted = strtoul(optarg, &end, 10);
 			if (*end != '\0')
@@ -320,11 +344,11 @@  int main(int argc, char **argv)
 
 	ctx.sigfd = make_signalfd();
 
-	rv = gpiod_ctxless_event_monitor_multiple(argv[0], event_type,
-						  offsets, num_lines,
-						  active_low, "gpiomon",
-						  &timeout, poll_callback,
-						  event_callback, &ctx);
+	rv = gpiod_ctxless_event_monitor_multiple_ext(
+				argv[0], event_type, offsets,
+				num_lines, active_low, "gpiomon",
+				&timeout, poll_callback,
+				event_callback, &ctx, flags);
 	if (rv)
 		die_perror("error waiting for events");
 
diff --git a/tools/gpioset.c b/tools/gpioset.c
index d9977a7..b91baea 100644
--- a/tools/gpioset.c
+++ b/tools/gpioset.c
@@ -23,6 +23,8 @@  static const struct option longopts[] = {
 	{ "help",		no_argument,		NULL,	'h' },
 	{ "version",		no_argument,		NULL,	'v' },
 	{ "active-low",		no_argument,		NULL,	'l' },
+	{ "bias",		required_argument,	NULL,	'B' },
+	{ "drive",		required_argument,	NULL,	'D' },
 	{ "mode",		required_argument,	NULL,	'm' },
 	{ "sec",		required_argument,	NULL,	's' },
 	{ "usec",		required_argument,	NULL,	'u' },
@@ -30,7 +32,7 @@  static const struct option longopts[] = {
 	{ GETOPT_NULL_LONGOPT },
 };
 
-static const char *const shortopts = "+hvlm:s:u:b";
+static const char *const shortopts = "+hvlB:D:m:s:u:b";
 
 static void print_help(void)
 {
@@ -42,12 +44,27 @@  static void print_help(void)
 	printf("  -h, --help:\t\tdisplay this message and exit\n");
 	printf("  -v, --version:\tdisplay the version and exit\n");
 	printf("  -l, --active-low:\tset the line active state to low\n");
+	printf("  -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n");
+	printf("		set the line bias\n");
+	printf("  -D, --drive=[push-pull|open-drain|open-source] (defaults to 'push-pull'):\n");
+	printf("		set the line drive mode\n");
 	printf("  -m, --mode=[exit|wait|time|signal] (defaults to 'exit'):\n");
 	printf("		tell the program what to do after setting values\n");
 	printf("  -s, --sec=SEC:\tspecify the number of seconds to wait (only valid for --mode=time)\n");
 	printf("  -u, --usec=USEC:\tspecify the number of microseconds to wait (only valid for --mode=time)\n");
 	printf("  -b, --background:\tafter setting values: detach from the controlling terminal\n");
 	printf("\n");
+	printf("Biases:\n");
+	printf("  as-is:\tleave bias unchanged\n");
+	printf("  disable:\tdisable bias\n");
+	printf("  pull-up:\tenable pull-up\n");
+	printf("  pull-down:\tenable pull-down\n");
+	printf("\n");
+	printf("Drives:\n");
+	printf("  push-pull:\tdrive the line both high and low\n");
+	printf("  open-drain:\tdrive the line low or go high impedance\n");
+	printf("  open-source:\tdrive the line high or go high impedance\n");
+	printf("\n");
 	printf("Modes:\n");
 	printf("  exit:\t\tset values and exit immediately\n");
 	printf("  wait:\t\tset values and wait for user to press ENTER\n");
@@ -178,11 +195,31 @@  static const struct mode_mapping *parse_mode(const char *mode)
 	return NULL;
 }
 
+static int bias_flags(const char *option)
+{
+	if (strcmp(option, "pull-down") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_PULL_DOWN;
+	if (strcmp(option, "pull-up") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_PULL_UP;
+	if (strcmp(option, "disable") == 0)
+		return GPIOD_CTXLESS_FLAG_BIAS_DISABLE;
+	return 0;
+}
+
+static int drive_flags(const char *option)
+{
+	if (strcmp(option, "open-drain") == 0)
+		return GPIOD_CTXLESS_FLAG_OPEN_DRAIN;
+	if (strcmp(option, "open-source") == 0)
+		return GPIOD_CTXLESS_FLAG_OPEN_SOURCE;
+	return 0;
+}
+
 int main(int argc, char **argv)
 {
 	const struct mode_mapping *mode = &modes[MODE_EXIT];
 	unsigned int *offsets, num_lines, i;
-	int *values, rv, optc, opti;
+	int *values, rv, optc, opti, flags = 0;
 	struct callback_data cbdata;
 	bool active_low = false;
 	char *device, *end;
@@ -204,6 +241,12 @@  int main(int argc, char **argv)
 		case 'l':
 			active_low = true;
 			break;
+		case 'B':
+			flags |= bias_flags(optarg);
+			break;
+		case 'D':
+			flags |= drive_flags(optarg);
+			break;
 		case 'm':
 			mode = parse_mode(optarg);
 			if (!mode)
@@ -268,9 +311,10 @@  int main(int argc, char **argv)
 			die("invalid offset: %s", argv[i + 1]);
 	}
 
-	rv = gpiod_ctxless_set_value_multiple(device, offsets, values,
-					      num_lines, active_low, "gpioset",
-					      mode->callback, &cbdata);
+	rv = gpiod_ctxless_set_value_multiple_ext(
+				device, offsets, values,
+				num_lines, active_low, "gpioset",
+				mode->callback, &cbdata, flags);
 	if (rv < 0)
 		die_perror("error setting the GPIO line values");