Message ID | 20190927100407.1863293-4-paul.kocialkowski@bootlin.com |
---|---|
State | New |
Headers | show |
Series | LogiCVC mfd and GPIO support | expand |
pt., 27 wrz 2019 o 12:04 Paul Kocialkowski <paul.kocialkowski@bootlin.com> napisał(a): > > Some drivers might need a custom get operation to match custom > behavior implemented in the set operation. > > Add plumbing for supporting that. > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > --- > drivers/gpio/gpio-syscon.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c > index 31f332074d7d..05c537ed73f1 100644 > --- a/drivers/gpio/gpio-syscon.c > +++ b/drivers/gpio/gpio-syscon.c > @@ -43,8 +43,9 @@ struct syscon_gpio_data { > unsigned int bit_count; > unsigned int dat_bit_offset; > unsigned int dir_bit_offset; > - void (*set)(struct gpio_chip *chip, > - unsigned offset, int value); > + int (*get)(struct gpio_chip *chip, unsigned offset); > + void (*set)(struct gpio_chip *chip, unsigned offset, > + int value); Why did you change this line? Doesn't seem necessary and pollutes the history. Bart > }; > > struct syscon_gpio_priv { > @@ -252,7 +253,7 @@ static int syscon_gpio_probe(struct platform_device *pdev) > priv->chip.label = dev_name(dev); > priv->chip.base = -1; > priv->chip.ngpio = priv->data->bit_count; > - priv->chip.get = syscon_gpio_get; > + priv->chip.get = priv->data->get ? : syscon_gpio_get; > if (priv->data->flags & GPIO_SYSCON_FEAT_IN) > priv->chip.direction_input = syscon_gpio_dir_in; > if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) { > -- > 2.23.0 >
Hi, On Thu 03 Oct 19, 10:24, Bartosz Golaszewski wrote: > pt., 27 wrz 2019 o 12:04 Paul Kocialkowski > <paul.kocialkowski@bootlin.com> napisał(a): > > > > Some drivers might need a custom get operation to match custom > > behavior implemented in the set operation. > > > > Add plumbing for supporting that. > > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > > --- > > drivers/gpio/gpio-syscon.c | 7 ++++--- > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c > > index 31f332074d7d..05c537ed73f1 100644 > > --- a/drivers/gpio/gpio-syscon.c > > +++ b/drivers/gpio/gpio-syscon.c > > @@ -43,8 +43,9 @@ struct syscon_gpio_data { > > unsigned int bit_count; > > unsigned int dat_bit_offset; > > unsigned int dir_bit_offset; > > - void (*set)(struct gpio_chip *chip, > > - unsigned offset, int value); > > + int (*get)(struct gpio_chip *chip, unsigned offset); > > + void (*set)(struct gpio_chip *chip, unsigned offset, > > + int value); > > Why did you change this line? Doesn't seem necessary and pollutes the history. This is for consistency since both the "chip" and "offset" arguments can fit in a single line. Since I want the "get" addition to fit in a single line, bringing back "offset" on the previous line of "set" makes things consistent. There's probably no particular reason for the split in the first place. Do you think it needs a separate cosmetic commit only for that? I'd rather add a note in the commit message and keep the change as-is. Cheers, Paul > Bart > > > }; > > > > struct syscon_gpio_priv { > > @@ -252,7 +253,7 @@ static int syscon_gpio_probe(struct platform_device *pdev) > > priv->chip.label = dev_name(dev); > > priv->chip.base = -1; > > priv->chip.ngpio = priv->data->bit_count; > > - priv->chip.get = syscon_gpio_get; > > + priv->chip.get = priv->data->get ? : syscon_gpio_get; > > if (priv->data->flags & GPIO_SYSCON_FEAT_IN) > > priv->chip.direction_input = syscon_gpio_dir_in; > > if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) { > > -- > > 2.23.0 > >
czw., 3 paź 2019 o 13:26 Paul Kocialkowski <paul.kocialkowski@bootlin.com> napisał(a): > > Hi, > > On Thu 03 Oct 19, 10:24, Bartosz Golaszewski wrote: > > pt., 27 wrz 2019 o 12:04 Paul Kocialkowski > > <paul.kocialkowski@bootlin.com> napisał(a): > > > > > > Some drivers might need a custom get operation to match custom > > > behavior implemented in the set operation. > > > > > > Add plumbing for supporting that. > > > > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > > > --- > > > drivers/gpio/gpio-syscon.c | 7 ++++--- > > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c > > > index 31f332074d7d..05c537ed73f1 100644 > > > --- a/drivers/gpio/gpio-syscon.c > > > +++ b/drivers/gpio/gpio-syscon.c > > > @@ -43,8 +43,9 @@ struct syscon_gpio_data { > > > unsigned int bit_count; > > > unsigned int dat_bit_offset; > > > unsigned int dir_bit_offset; > > > - void (*set)(struct gpio_chip *chip, > > > - unsigned offset, int value); > > > + int (*get)(struct gpio_chip *chip, unsigned offset); > > > + void (*set)(struct gpio_chip *chip, unsigned offset, > > > + int value); > > > > Why did you change this line? Doesn't seem necessary and pollutes the history. > > This is for consistency since both the "chip" and "offset" arguments can fit > in a single line. Since I want the "get" addition to fit in a single line, > bringing back "offset" on the previous line of "set" makes things consistent. > There's probably no particular reason for the split in the first place. > > Do you think it needs a separate cosmetic commit only for that? > I'd rather add a note in the commit message and keep the change as-is. > The line is still broken - just in a different place. I'd prefer to leave it as it is frankly, there's nothing wrong with it. Bart > Cheers, > > Paul > > > Bart > > > > > }; > > > > > > struct syscon_gpio_priv { > > > @@ -252,7 +253,7 @@ static int syscon_gpio_probe(struct platform_device *pdev) > > > priv->chip.label = dev_name(dev); > > > priv->chip.base = -1; > > > priv->chip.ngpio = priv->data->bit_count; > > > - priv->chip.get = syscon_gpio_get; > > > + priv->chip.get = priv->data->get ? : syscon_gpio_get; > > > if (priv->data->flags & GPIO_SYSCON_FEAT_IN) > > > priv->chip.direction_input = syscon_gpio_dir_in; > > > if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) { > > > -- > > > 2.23.0 > > > > > -- > Paul Kocialkowski, Bootlin > Embedded Linux and kernel engineering > https://bootlin.com
Hi, On Thu 03 Oct 19, 16:05, Bartosz Golaszewski wrote: > czw., 3 paź 2019 o 13:26 Paul Kocialkowski > <paul.kocialkowski@bootlin.com> napisał(a): > > > > Hi, > > > > On Thu 03 Oct 19, 10:24, Bartosz Golaszewski wrote: > > > pt., 27 wrz 2019 o 12:04 Paul Kocialkowski > > > <paul.kocialkowski@bootlin.com> napisał(a): > > > > > > > > Some drivers might need a custom get operation to match custom > > > > behavior implemented in the set operation. > > > > > > > > Add plumbing for supporting that. > > > > > > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > > > > --- > > > > drivers/gpio/gpio-syscon.c | 7 ++++--- > > > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > > > > > diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c > > > > index 31f332074d7d..05c537ed73f1 100644 > > > > --- a/drivers/gpio/gpio-syscon.c > > > > +++ b/drivers/gpio/gpio-syscon.c > > > > @@ -43,8 +43,9 @@ struct syscon_gpio_data { > > > > unsigned int bit_count; > > > > unsigned int dat_bit_offset; > > > > unsigned int dir_bit_offset; > > > > - void (*set)(struct gpio_chip *chip, > > > > - unsigned offset, int value); > > > > + int (*get)(struct gpio_chip *chip, unsigned offset); > > > > + void (*set)(struct gpio_chip *chip, unsigned offset, > > > > + int value); > > > > > > Why did you change this line? Doesn't seem necessary and pollutes the history. > > > > This is for consistency since both the "chip" and "offset" arguments can fit > > in a single line. Since I want the "get" addition to fit in a single line, > > bringing back "offset" on the previous line of "set" makes things consistent. > > There's probably no particular reason for the split in the first place. > > > > Do you think it needs a separate cosmetic commit only for that? > > I'd rather add a note in the commit message and keep the change as-is. > > > > The line is still broken - just in a different place. I'd prefer to > leave it as it is frankly, there's nothing wrong with it. The point is rather that this introduces inconsistency between the two lines. It's definitely not a major issue, but I still believe it is a coding style issue. It surely doesn't hurt to fix it. Cheers, Paul > Bart > > > Cheers, > > > > Paul > > > > > Bart > > > > > > > }; > > > > > > > > struct syscon_gpio_priv { > > > > @@ -252,7 +253,7 @@ static int syscon_gpio_probe(struct platform_device *pdev) > > > > priv->chip.label = dev_name(dev); > > > > priv->chip.base = -1; > > > > priv->chip.ngpio = priv->data->bit_count; > > > > - priv->chip.get = syscon_gpio_get; > > > > + priv->chip.get = priv->data->get ? : syscon_gpio_get; > > > > if (priv->data->flags & GPIO_SYSCON_FEAT_IN) > > > > priv->chip.direction_input = syscon_gpio_dir_in; > > > > if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) { > > > > -- > > > > 2.23.0 > > > > > > > > -- > > Paul Kocialkowski, Bootlin > > Embedded Linux and kernel engineering > > https://bootlin.com
diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c index 31f332074d7d..05c537ed73f1 100644 --- a/drivers/gpio/gpio-syscon.c +++ b/drivers/gpio/gpio-syscon.c @@ -43,8 +43,9 @@ struct syscon_gpio_data { unsigned int bit_count; unsigned int dat_bit_offset; unsigned int dir_bit_offset; - void (*set)(struct gpio_chip *chip, - unsigned offset, int value); + int (*get)(struct gpio_chip *chip, unsigned offset); + void (*set)(struct gpio_chip *chip, unsigned offset, + int value); }; struct syscon_gpio_priv { @@ -252,7 +253,7 @@ static int syscon_gpio_probe(struct platform_device *pdev) priv->chip.label = dev_name(dev); priv->chip.base = -1; priv->chip.ngpio = priv->data->bit_count; - priv->chip.get = syscon_gpio_get; + priv->chip.get = priv->data->get ? : syscon_gpio_get; if (priv->data->flags & GPIO_SYSCON_FEAT_IN) priv->chip.direction_input = syscon_gpio_dir_in; if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) {
Some drivers might need a custom get operation to match custom behavior implemented in the set operation. Add plumbing for supporting that. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> --- drivers/gpio/gpio-syscon.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)