diff mbox series

[6/6] arm64: dts: k3-j721e: Add gpio-keys on common processor board

Message ID 20190809082947.30590-7-lokeshvutla@ti.com
State New
Headers show
Series arm64: dts: ti: k3-j721e: Add gpio nodes | expand

Commit Message

Lokesh Vutla Aug. 9, 2019, 8:29 a.m. UTC 
From: Nikhil Devshatwar <nikhil.nd@ti.com>

Common processor board for K3 J721E platform has two push buttons
namely SW10 and SW11.
Add a gpio-keys device node to model them as input keys in Linux.
Add required pinmux nodes to set GPIO pins as input.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)

Comments

J, KEERTHY Aug. 9, 2019, 2:56 p.m. UTC | #1 
On 09/08/19 1:59 PM, Lokesh Vutla wrote:
> From: Nikhil Devshatwar <nikhil.nd@ti.com>
> 
> Common processor board for K3 J721E platform has two push buttons
> namely SW10 and SW11.
> Add a gpio-keys device node to model them as input keys in Linux.
> Add required pinmux nodes to set GPIO pins as input.

Reviewed-by: Keerthy <j-keerthy@ti.com>

> 
> Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>   .../dts/ti/k3-j721e-common-proc-board.dts     | 37 +++++++++++++++++++
>   1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> index 509579ca3db2..d2894d55fbbe 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> @@ -6,12 +6,49 @@
>   /dts-v1/;
>   
>   #include "k3-j721e-som-p0.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
>   
>   / {
>   	chosen {
>   		stdout-path = "serial2:115200n8";
>   		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
>   	};
> +
> +	gpio_keys: gpio-keys {
> +		compatible = "gpio-keys";
> +		autorepeat;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
> +
> +		sw10: sw10 {
> +			label = "GPIO Key USER1";
> +			linux,code = <BTN_0>;
> +			gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		sw11: sw11 {
> +			label = "GPIO Key USER2";
> +			linux,code = <BTN_1>;
> +			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&main_pmx0 {
> +	sw10_button_pins_default: sw10_button_pins_default {
> +		pinctrl-single,pins = <
> +			J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
> +		>;
> +	};
> +};
> +
> +&wkup_pmx0 {
> +	sw11_button_pins_default: sw11_button_pins_default {
> +		pinctrl-single,pins = <
> +			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
> +		>;
> +	};
>   };
>   
>   &wkup_uart0 {
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 509579ca3db2..d2894d55fbbe 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -6,12 +6,49 @@ 
 /dts-v1/;
 
 #include "k3-j721e-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	chosen {
 		stdout-path = "serial2:115200n8";
 		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
 	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
+
+		sw10: sw10 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		sw11: sw11 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&main_pmx0 {
+	sw10_button_pins_default: sw10_button_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	sw11_button_pins_default: sw11_button_pins_default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
 };
 
 &wkup_uart0 {