[v2,bus+gpio,3/4] drivers: gpio: Add support for GPIOs over Moxtet bus

diff --git a/MAINTAINERS b/MAINTAINERS
index ccc745d1b430..b8c04b98b92f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1478,6 +1478,7 @@  W:	http://mox.turris.cz
 S:	Maintained
 F:	include/linux/moxtet.h
 F:	drivers/bus/moxtet.c
+F:	drivers/gpio/gpio-moxtet.c
 
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 833a1b51c948..6e753ce10972 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -334,6 +334,15 @@  config GPIO_MOCKUP
 	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
 	  it.
 
+config GPIO_MOXTET
+	tristate "Turris Mox Moxtet bus GPIO expander"
+	depends on MOXTET
+	help
+	  Say yes here if you are building for the Turris Mox router.
+	  This is the driver needed for configuring the GPIOs via the Moxtet
+	  bus. For example the Mox module with SFP cage needs this driver
+	  so that phylink can use corresponding GPIOs.
+
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 671c4477c951..044435ac45e2 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -85,6 +85,7 @@  obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
 obj-$(CONFIG_GPIO_MOCKUP)      += gpio-mockup.o
+obj-$(CONFIG_GPIO_MOXTET)	+= gpio-moxtet.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSIC)		+= gpio-msic.o
diff --git a/drivers/gpio/gpio-moxtet.c b/drivers/gpio/gpio-moxtet.c
new file mode 100644
index 000000000000..0b0af8651443
--- /dev/null
+++ b/drivers/gpio/gpio-moxtet.c
@@ -0,0 +1,178 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Turris Mox Moxtet GPIO expander
+ *
+ *  Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/moxtet.h>
+#include <linux/module.h>
+
+#define MOXTET_GPIO_NGPIOS	12
+#define MOXTET_GPIO_INPUTS	4
+
+struct moxtet_gpio_desc {
+	u16 in_mask;
+	u16 out_mask;
+};
+
+static const struct moxtet_gpio_desc descs[] = {
+	[TURRIS_MOX_MODULE_SFP] = {
+		.in_mask = 0x7,
+		.out_mask = 0x30,
+	},
+};
+
+struct moxtet_gpio_chip {
+	struct device			*dev;
+	struct gpio_chip		gpio_chip;
+	const struct moxtet_gpio_desc	*desc;
+};
+
+static int moxtet_gpio_get_value(struct gpio_chip *gc, unsigned int offset)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+	int ret;
+
+	if (chip->desc->in_mask & BIT(offset)) {
+		ret = moxtet_device_read(chip->dev);
+	} else if (chip->desc->out_mask & BIT(offset)) {
+		ret = moxtet_device_written(chip->dev);
+		if (ret >= 0)
+			ret <<= MOXTET_GPIO_INPUTS;
+	} else {
+		return -EINVAL;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	return (ret & BIT(offset)) ? 1 : 0;
+}
+
+static void moxtet_gpio_set_value(struct gpio_chip *gc, unsigned int offset,
+				  int val)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+	int state;
+
+	state = moxtet_device_written(chip->dev);
+	if (state < 0)
+		return;
+
+	offset -= MOXTET_GPIO_INPUTS;
+
+	if (val)
+		state |= BIT(offset);
+	else
+		state &= ~BIT(offset);
+
+	moxtet_device_write(chip->dev, state);
+}
+
+static int moxtet_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+	if (chip->desc->in_mask & BIT(offset))
+		return 1;
+	else if (chip->desc->out_mask & BIT(offset))
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int moxtet_gpio_direction_input(struct gpio_chip *gc,
+				       unsigned int offset)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+	if (chip->desc->in_mask & BIT(offset))
+		return 0;
+	else if (chip->desc->out_mask & BIT(offset))
+		return -ENOTSUPP;
+	else
+		return -EINVAL;
+}
+
+static int moxtet_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int offset, int val)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+	if (chip->desc->out_mask & BIT(offset))
+		moxtet_gpio_set_value(gc, offset, val);
+	else if (chip->desc->in_mask & BIT(offset))
+		return -ENOTSUPP;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int moxtet_gpio_probe(struct device *dev)
+{
+	struct moxtet_gpio_chip *chip;
+	struct device_node *nc = dev->of_node;
+	int id;
+
+	id = to_moxtet_device(dev)->id;
+
+	if (id >= ARRAY_SIZE(descs)) {
+		dev_err(dev, "%pOF Moxtet device id 0x%x is not supported by "
+			     "gpio-moxtet driver\n", nc, id);
+		return -ENOTSUPP;
+	}
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	chip->gpio_chip.parent = dev;
+	chip->desc = &descs[id];
+
+	dev_set_drvdata(dev, chip);
+
+	chip->gpio_chip.label = dev_name(dev);
+	chip->gpio_chip.get_direction = moxtet_gpio_get_direction;
+	chip->gpio_chip.direction_input = moxtet_gpio_direction_input;
+	chip->gpio_chip.direction_output = moxtet_gpio_direction_output;
+	chip->gpio_chip.get = moxtet_gpio_get_value;
+	chip->gpio_chip.set = moxtet_gpio_set_value;
+	chip->gpio_chip.base = -1;
+
+	chip->gpio_chip.ngpio = MOXTET_GPIO_NGPIOS;
+
+	chip->gpio_chip.can_sleep = true;
+	chip->gpio_chip.owner = THIS_MODULE;
+
+	return devm_gpiochip_add_data(dev, &chip->gpio_chip, chip);
+}
+
+static const struct of_device_id moxtet_gpio_dt_ids[] = {
+	{ .compatible = "cznic,moxtet-gpio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, moxtet_gpio_dt_ids);
+
+static const enum turris_mox_module_id moxtet_gpio_module_table[] = {
+	TURRIS_MOX_MODULE_SFP,
+	0,
+};
+
+static struct moxtet_driver moxtet_gpio_driver = {
+	.driver = {
+		.name		= "moxtet-gpio",
+		.of_match_table	= moxtet_gpio_dt_ids,
+		.probe		= moxtet_gpio_probe,
+	},
+	.id_table = moxtet_gpio_module_table,
+};
+module_moxtet_driver(moxtet_gpio_driver);
+
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
+MODULE_DESCRIPTION("Turris Mox Moxtet GPIO expander");
+MODULE_LICENSE("GPL v2");