[2/5] arm64: dts: hisilicon: hi3760: Add GPIO controller support

Message ID	20181023190655.12004-3-manivannan.sadhasivam@linaro.org
State	New
Headers	show Return-Path: <linux-gpio-owner@vger.kernel.org> From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> To: xuwei5@hisilicon.com, linus.walleij@linaro.org, robh+dt@kernel.org Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, amit.kucheria@linaro.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Subject: [PATCH 2/5] arm64: dts: hisilicon: hi3760: Add GPIO controller support Date: Wed, 24 Oct 2018 00:36:52 +0530 Message-Id: <20181023190655.12004-3-manivannan.sadhasivam@linaro.org> In-Reply-To: <20181023190655.12004-1-manivannan.sadhasivam@linaro.org> References: <20181023190655.12004-1-manivannan.sadhasivam@linaro.org> Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk
Series	Add Pinctrl and GPIO support for HI3670 SoC \| expand [0/5] Add Pinctrl and GPIO support for HI3670 SoC [1/5] arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board [2/5] arm64: dts: hisilicon: hi3760: Add GPIO controller support [3/5] arm64: dts: hisilicon: hi3670: Add UART nodes [4/5] arm64: boot: dts: hisilicon: hikey970: Enable on-board UARTs [5/5] arm64: dts: hisilicon: hikey970: Add GPIO line names

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index 4f5118642024..8fdc1dfcb06c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "hi3670.dtsi" +#include "hikey970-pinctrl.dtsi" / { model = "HiKey970"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 34a2f0dbc6f7..b99f5e0fe577 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -196,5 +196,384 @@ clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; + + gpio0: gpio@e8a0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0b000 0x0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@e8a0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0c000 0x0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@e8a0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0d000 0x0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 6 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@e8a0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0e000 0x0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@e8a0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a0f000 0x0 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 18 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@e8a10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a10000 0x0 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 26 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@e8a11000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a11000 0x0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 34 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO6>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@e8a12000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a12000 0x0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 41 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO7>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@e8a13000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a13000 0x0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 49 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO8>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@e8a14000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a14000 0x0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 57 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO9>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@e8a15000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a15000 0x0 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 65 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO10>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@e8a16000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a16000 0x0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 73 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO11>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@e8a17000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a17000 0x0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 81 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO12>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@e8a18000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a18000 0x0 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO13>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@e8a19000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a19000 0x0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO14>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@e8a1a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1a000 0x0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO15>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@e8a1b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1b000 0x0 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx5 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO16>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@e8a1c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1c000 0x0 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx5 0 8 2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO17>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@fff28000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff28000 0x0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 4 42 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_GPIO18>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@fff29000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff29000 0x0 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 0 61 2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_GPIO19>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio@e8a1f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a1f000 0x0 0x1000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx7 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO20>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio@e8a20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xe8a20000 0x0 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx7 0 8 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3670_PCLK_GPIO21>; + clock-names = "apb_pclk"; + }; + + gpio22: gpio@fff0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0b000 0x0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO176 */ + gpio-ranges = <&pmx1 2 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio23: gpio@fff0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0c000 0x0 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO184 */ + gpio-ranges = <&pmx1 0 6 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio24: gpio@fff0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0d000 0x0 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO192 */ + gpio-ranges = <&pmx1 0 14 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio25: gpio@fff0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0e000 0x0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO200 */ + gpio-ranges = <&pmx1 0 22 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio26: gpio@fff0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff0f000 0x0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO208 */ + gpio-ranges = <&pmx1 0 30 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio27: gpio@fff10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff10000 0x0 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO216 */ + gpio-ranges = <&pmx1 4 31 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio28: gpio@fff1d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xfff1d000 0x0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 1 35 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3670_PCLK_AO_GPIO6>; + clock-names = "apb_pclk"; + }; }; };

[2/5] arm64: dts: hisilicon: hi3760: Add GPIO controller support

Commit Message

Patch