diff --git a/drivers/Kconfig b/drivers/Kconfig
index 879dc0604cba..f0563ce52fab 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -55,6 +55,8 @@ source "drivers/char/Kconfig"
 
 source "drivers/i2c/Kconfig"
 
+source "drivers/i3c/Kconfig"
+
 source "drivers/spi/Kconfig"
 
 source "drivers/spmi/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 24cd47014657..999239dc29d4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -111,7 +111,7 @@ obj-$(CONFIG_SERIO)		+= input/serio/
 obj-$(CONFIG_GAMEPORT)		+= input/gameport/
 obj-$(CONFIG_INPUT)		+= input/
 obj-$(CONFIG_RTC_LIB)		+= rtc/
-obj-y				+= i2c/ media/
+obj-y				+= i2c/ i3c/ media/
 obj-$(CONFIG_PPS)		+= pps/
 obj-y				+= ptp/
 obj-$(CONFIG_W1)		+= w1/
diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
new file mode 100644
index 000000000000..cf3752412ae9
--- /dev/null
+++ b/drivers/i3c/Kconfig
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig I3C
+	tristate "I3C support"
+	select I2C
+	help
+	  I3C is a serial protocol standardized by the MIPI alliance.
+
+	  It's supposed to be backward compatible with I2C while providing
+	  support for high speed transfers and native interrupt support
+	  without the need for extra pins.
+
+	  The I3C protocol also standardizes the slave device types and is
+	  mainly design to communicate with sensors.
+
+	  If you want I3C support, you should say Y here and also to the
+	  specific driver for your bus adapter(s) below.
+
+	  This I3C support can also be built as a module.  If so, the module
+	  will be called i3c.
+
+if I3C
+source "drivers/i3c/master/Kconfig"
+endif # I3C
diff --git a/drivers/i3c/Makefile b/drivers/i3c/Makefile
new file mode 100644
index 000000000000..3b6d1502d6e6
--- /dev/null
+++ b/drivers/i3c/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+i3c-y				:= core.o device.o master.o
+obj-$(CONFIG_I3C)		+= i3c.o
+obj-$(CONFIG_I3C)		+= master/
diff --git a/drivers/i3c/core.c b/drivers/i3c/core.c
new file mode 100644
index 000000000000..d6d938a785a9
--- /dev/null
+++ b/drivers/i3c/core.c
@@ -0,0 +1,620 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/device.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+
+#include "internals.h"
+
+static DEFINE_IDR(i3c_bus_idr);
+static DEFINE_MUTEX(i3c_core_lock);
+
+/**
+ * i3c_bus_maintenance_lock - Lock the bus for a maintenance operation
+ * @bus: I3C bus to take the lock on
+ *
+ * This function takes the bus lock so that no other operations can occur on
+ * the bus. This is needed for all kind of bus maintenance operation, like
+ * - enabling/disabling slave events
+ * - re-triggering DAA
+ * - changing the dynamic address of a device
+ * - relinquishing mastership
+ * - ...
+ *
+ * The reason for this kind of locking is that we don't want drivers and core
+ * logic to rely on I3C device information that could be changed behind their
+ * back.
+ */
+void i3c_bus_maintenance_lock(struct i3c_bus *bus)
+{
+	down_write(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_maintenance_lock);
+
+/**
+ * i3c_bus_maintenance_unlock - Release the bus lock after a maintenance
+ *			      operation
+ * @bus: I3C bus to release the lock on
+ *
+ * Should be called when the bus maintenance operation is done. See
+ * i3c_bus_maintenance_lock() for more details on what these maintenance
+ * operations are.
+ */
+void i3c_bus_maintenance_unlock(struct i3c_bus *bus)
+{
+	up_write(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_maintenance_unlock);
+
+/**
+ * i3c_bus_normaluse_lock - Lock the bus for a normal operation
+ * @bus: I3C bus to take the lock on
+ *
+ * This function takes the bus lock for any operation that is not a maintenance
+ * operation (see i3c_bus_maintenance_lock() for a non-exhaustive list of
+ * maintenance operations). Basically all communications with I3C devices are
+ * normal operations (HDR, SDR transfers or CCC commands that do not change bus
+ * state or I3C dynamic address).
+ *
+ * Note that this lock is not guaranteeing serialization of normal operations.
+ * In other words, transfer requests passed to the I3C master can be submitted
+ * in parallel and I3C master drivers have to use their own locking to make
+ * sure two different communications are not inter-mixed, or access to the
+ * output/input queue is not done while the engine is busy.
+ */
+void i3c_bus_normaluse_lock(struct i3c_bus *bus)
+{
+	down_read(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_normaluse_lock);
+
+/**
+ * i3c_bus_normaluse_unlock - Release the bus lock after a normal operation
+ * @bus: I3C bus to release the lock on
+ *
+ * Should be called when a normal operation is done. See
+ * i3c_bus_normaluse_lock() for more details on what these normal operations
+ * are.
+ */
+void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
+{
+	up_read(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_normaluse_unlock);
+
+static ssize_t bcr_show(struct device *dev,
+			struct device_attribute *da,
+			char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%x\n", i3cdev->info.bcr);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(bcr);
+
+static ssize_t dcr_show(struct device *dev,
+			struct device_attribute *da,
+			char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%x\n", i3cdev->info.dcr);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(dcr);
+
+static ssize_t pid_show(struct device *dev,
+			struct device_attribute *da,
+			char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%llx\n", i3cdev->info.pid);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(pid);
+
+static ssize_t address_show(struct device *dev,
+			    struct device_attribute *da,
+			    char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%02x\n", i3cdev->info.dyn_addr);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(address);
+
+static const char * const hdrcap_strings[] = {
+	"hdr-ddr", "hdr-tsp", "hdr-tsl",
+};
+
+static ssize_t hdrcap_show(struct device *dev,
+			   struct device_attribute *da,
+			   char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	unsigned long caps = i3cdev->info.hdr_cap;
+	ssize_t offset = 0, ret;
+	int mode;
+
+	i3c_bus_normaluse_lock(bus);
+	for_each_set_bit(mode, &caps, 8) {
+		if (mode >= ARRAY_SIZE(hdrcap_strings))
+			break;
+
+		if (!hdrcap_strings[mode])
+			continue;
+
+		ret = sprintf(buf + offset, offset ? " %s" : "%s",
+			      hdrcap_strings[mode]);
+		if (ret < 0)
+			goto out;
+
+		offset += ret;
+	}
+
+	ret = sprintf(buf + offset, "\n");
+	if (ret < 0)
+		goto out;
+
+	ret = offset + ret;
+
+out:
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(hdrcap);
+
+static struct attribute *i3c_device_attrs[] = {
+	&dev_attr_bcr.attr,
+	&dev_attr_dcr.attr,
+	&dev_attr_pid.attr,
+	&dev_attr_address.attr,
+	&dev_attr_hdrcap.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(i3c_device);
+
+static int i3c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
+	u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
+	u16 ext = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
+
+	if (I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid))
+		return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X",
+				      i3cdev->info.dcr, manuf);
+
+	return add_uevent_var(env,
+			      "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04xext%04x",
+			      i3cdev->info.dcr, manuf, part, ext);
+}
+
+const struct device_type i3c_device_type = {
+	.groups	= i3c_device_groups,
+	.uevent = i3c_device_uevent,
+};
+
+const struct device_type i3c_master_type = {
+	.groups	= i3c_device_groups,
+};
+
+static const struct i3c_device_id *
+i3c_device_match_id(struct i3c_device *i3cdev,
+		    const struct i3c_device_id *id_table)
+{
+	const struct i3c_device_id *id;
+
+	/*
+	 * The lower 32bits of the provisional ID is just filled with a random
+	 * value, try to match using DCR info.
+	 */
+	if (!I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid)) {
+		u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
+		u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
+		u16 ext_info = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
+
+		/* First try to match by manufacturer/part ID. */
+		for (id = id_table; id->match_flags != 0; id++) {
+			if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
+			    I3C_MATCH_MANUF_AND_PART)
+				continue;
+
+			if (manuf != id->manuf_id || part != id->part_id)
+				continue;
+
+			if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
+			    ext_info != id->extra_info)
+				continue;
+
+			return id;
+		}
+	}
+
+	/* Fallback to DCR match. */
+	for (id = id_table; id->match_flags != 0; id++) {
+		if ((id->match_flags & I3C_MATCH_DCR) &&
+		    id->dcr == i3cdev->info.dcr)
+			return id;
+	}
+
+	return NULL;
+}
+
+static int i3c_device_match(struct device *dev, struct device_driver *drv)
+{
+	struct i3c_device *i3cdev;
+	struct i3c_driver *i3cdrv;
+
+	if (dev->type != &i3c_device_type)
+		return 0;
+
+	i3cdev = dev_to_i3cdev(dev);
+	i3cdrv = drv_to_i3cdrv(drv);
+	if (i3c_device_match_id(i3cdev, i3cdrv->id_table))
+		return 1;
+
+	return 0;
+}
+
+static int i3c_device_probe(struct device *dev)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);
+
+	return driver->probe(i3cdev);
+}
+
+static int i3c_device_remove(struct device *dev)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);
+	int ret;
+
+	ret = driver->remove(i3cdev);
+	if (ret)
+		return ret;
+
+	if (WARN_ON(i3cdev->ibi))
+		i3c_device_free_ibi(i3cdev);
+
+	return ret;
+}
+
+struct bus_type i3c_bus_type = {
+	.name = "i3c",
+	.match = i3c_device_match,
+	.probe = i3c_device_probe,
+	.remove = i3c_device_remove,
+};
+
+enum i3c_addr_slot_status i3c_bus_get_addr_slot_status(struct i3c_bus *bus,
+						       u16 addr)
+{
+	int status, bitpos = addr * 2;
+
+	if (addr > I2C_MAX_ADDR)
+		return I3C_ADDR_SLOT_RSVD;
+
+	status = bus->addrslots[bitpos / BITS_PER_LONG];
+	status >>= bitpos % BITS_PER_LONG;
+
+	return status & I3C_ADDR_SLOT_STATUS_MASK;
+}
+
+void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr,
+				  enum i3c_addr_slot_status status)
+{
+	int bitpos = addr * 2;
+	unsigned long *ptr;
+
+	if (addr > I2C_MAX_ADDR)
+		return;
+
+	ptr = bus->addrslots + (bitpos / BITS_PER_LONG);
+	*ptr &= ~(I3C_ADDR_SLOT_STATUS_MASK << (bitpos % BITS_PER_LONG));
+	*ptr |= status << (bitpos % BITS_PER_LONG);
+}
+
+bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr)
+{
+	enum i3c_addr_slot_status status;
+
+	status = i3c_bus_get_addr_slot_status(bus, addr);
+
+	return status == I3C_ADDR_SLOT_FREE;
+}
+
+int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr)
+{
+	enum i3c_addr_slot_status status;
+	u8 addr;
+
+	for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) {
+		status = i3c_bus_get_addr_slot_status(bus, addr);
+		if (status == I3C_ADDR_SLOT_FREE)
+			return addr;
+	}
+
+	return -ENOMEM;
+}
+
+static void i3c_bus_init_addrslots(struct i3c_bus *bus)
+{
+	int i;
+
+	/* Addresses 0 to 7 are reserved. */
+	for (i = 0; i < 8; i++)
+		i3c_bus_set_addr_slot_status(bus, i, I3C_ADDR_SLOT_RSVD);
+
+	/*
+	 * Reserve broadcast address and all addresses that might collide
+	 * with the broadcast address when facing a single bit error.
+	 */
+	i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR,
+				     I3C_ADDR_SLOT_RSVD);
+	for (i = 0; i < 7; i++)
+		i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR ^ BIT(i),
+					     I3C_ADDR_SLOT_RSVD);
+}
+
+static const char * const i3c_bus_mode_strings[] = {
+	[I3C_BUS_MODE_PURE] = "pure",
+	[I3C_BUS_MODE_MIXED_FAST] = "mixed-fast",
+	[I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow",
+};
+
+static ssize_t mode_show(struct device *dev,
+			 struct device_attribute *da,
+			 char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	if (i3cbus->mode < 0 ||
+	    i3cbus->mode > ARRAY_SIZE(i3c_bus_mode_strings) ||
+	    !i3c_bus_mode_strings[i3cbus->mode])
+		ret = sprintf(buf, "unknown\n");
+	else
+		ret = sprintf(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]);
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(mode);
+
+static ssize_t current_master_show(struct device *dev,
+				   struct device_attribute *da,
+				   char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	ret = sprintf(buf, "%s\n", dev_name(&i3cbus->cur_master->dev));
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(current_master);
+
+static ssize_t i3c_scl_frequency_show(struct device *dev,
+				      struct device_attribute *da,
+				      char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i3c);
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(i3c_scl_frequency);
+
+static ssize_t i2c_scl_frequency_show(struct device *dev,
+				      struct device_attribute *da,
+				      char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i2c);
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(i2c_scl_frequency);
+
+static struct attribute *i3c_busdev_attrs[] = {
+	&dev_attr_mode.attr,
+	&dev_attr_current_master.attr,
+	&dev_attr_i3c_scl_frequency.attr,
+	&dev_attr_i2c_scl_frequency.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(i3c_busdev);
+
+static void i3c_busdev_release(struct device *dev)
+{
+	struct i3c_bus *bus = container_of(dev, struct i3c_bus, dev);
+
+	while (!list_empty(&bus->devs.i2c)) {
+		struct i2c_device *i2cdev;
+
+		i2cdev = list_first_entry(&bus->devs.i2c, struct i2c_device,
+					  common.node);
+		list_del(&i2cdev->common.node);
+		of_node_put(i2cdev->info.of_node);
+		kfree(i2cdev);
+	}
+
+	while (!list_empty(&bus->devs.i3c)) {
+		struct i3c_device *i3cdev;
+
+		i3cdev = list_first_entry(&bus->devs.i3c, struct i3c_device,
+					  common.node);
+		list_del(&i3cdev->common.node);
+		put_device(&i3cdev->dev);
+	}
+
+	mutex_lock(&i3c_core_lock);
+	idr_remove(&i3c_bus_idr, bus->id);
+	mutex_unlock(&i3c_core_lock);
+
+	of_node_put(bus->dev.of_node);
+	kfree(bus);
+}
+
+static const struct device_type i3c_busdev_type = {
+	.groups	= i3c_busdev_groups,
+};
+
+void i3c_bus_unref(struct i3c_bus *bus)
+{
+	put_device(&bus->dev);
+}
+
+struct i3c_bus *i3c_bus_create(struct device *parent)
+{
+	struct i3c_bus *i3cbus;
+	int ret;
+
+	i3cbus = kzalloc(sizeof(*i3cbus), GFP_KERNEL);
+	if (!i3cbus)
+		return ERR_PTR(-ENOMEM);
+
+	init_rwsem(&i3cbus->lock);
+	INIT_LIST_HEAD(&i3cbus->devs.i2c);
+	INIT_LIST_HEAD(&i3cbus->devs.i3c);
+	i3c_bus_init_addrslots(i3cbus);
+	i3cbus->mode = I3C_BUS_MODE_PURE;
+	i3cbus->dev.parent = parent;
+	i3cbus->dev.of_node = of_node_get(parent->of_node);
+	i3cbus->dev.bus = &i3c_bus_type;
+	i3cbus->dev.type = &i3c_busdev_type;
+	i3cbus->dev.release = i3c_busdev_release;
+
+	mutex_lock(&i3c_core_lock);
+	ret = idr_alloc(&i3c_bus_idr, i3cbus, 0, 0, GFP_KERNEL);
+	mutex_unlock(&i3c_core_lock);
+	if (ret < 0)
+		goto err_free_bus;
+
+	i3cbus->id = ret;
+	device_initialize(&i3cbus->dev);
+
+	return i3cbus;
+
+err_free_bus:
+	kfree(i3cbus);
+
+	return ERR_PTR(ret);
+}
+
+void i3c_bus_unregister(struct i3c_bus *bus)
+{
+	device_unregister(&bus->dev);
+}
+
+int i3c_bus_register(struct i3c_bus *i3cbus)
+{
+	struct i2c_device *i2cdev;
+
+	i3c_bus_for_each_i2cdev(i3cbus, i2cdev) {
+		switch (i2cdev->lvr & I3C_LVR_I2C_INDEX_MASK) {
+		case I3C_LVR_I2C_INDEX(0):
+			if (i3cbus->mode < I3C_BUS_MODE_MIXED_FAST)
+				i3cbus->mode = I3C_BUS_MODE_MIXED_FAST;
+			break;
+
+		case I3C_LVR_I2C_INDEX(1):
+		case I3C_LVR_I2C_INDEX(2):
+			if (i3cbus->mode < I3C_BUS_MODE_MIXED_SLOW)
+				i3cbus->mode = I3C_BUS_MODE_MIXED_SLOW;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	if (!i3cbus->scl_rate.i3c)
+		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
+
+	if (!i3cbus->scl_rate.i2c) {
+		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
+			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
+		else
+			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
+	}
+
+	/*
+	 * I3C/I2C frequency may have been overridden, check that user-provided
+	 * values are not exceeding max possible frequency.
+	 */
+	if (i3cbus->scl_rate.i3c > I3C_BUS_MAX_I3C_SCL_RATE ||
+	    i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_RATE) {
+		return -EINVAL;
+	}
+
+	dev_set_name(&i3cbus->dev, "i3c-%d", i3cbus->id);
+
+	return device_add(&i3cbus->dev);
+}
+
+static int __init i3c_init(void)
+{
+	return bus_register(&i3c_bus_type);
+}
+subsys_initcall(i3c_init);
+
+static void __exit i3c_exit(void)
+{
+	idr_destroy(&i3c_bus_idr);
+	bus_unregister(&i3c_bus_type);
+}
+module_exit(i3c_exit);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>");
+MODULE_DESCRIPTION("I3C core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
new file mode 100644
index 000000000000..8948d9bdec82
--- /dev/null
+++ b/drivers/i3c/device.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include "internals.h"
+
+/**
+ * i3c_device_do_priv_xfers() - do I3C SDR private transfers directed to a
+ *				specific device
+ *
+ * @dev: device with which the transfers should be done
+ * @xfers: array of transfers
+ * @nxfers: number of transfers
+ *
+ * Initiate one or several private SDR transfers with @dev.
+ *
+ * This function can sleep and thus cannot be called in atomic context.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_do_priv_xfers(struct i3c_device *dev,
+			     struct i3c_priv_xfer *xfers,
+			     int nxfers)
+{
+	struct i3c_master_controller *master;
+	int ret, i;
+
+	if (nxfers < 1)
+		return 0;
+
+	master = i3c_device_get_master(dev);
+	if (!master || !xfers)
+		return -EINVAL;
+
+	if (!master->ops->priv_xfers)
+		return -ENOTSUPP;
+
+	for (i = 0; i < nxfers; i++) {
+		if (!xfers[i].len || !xfers[i].data.in)
+			return -EINVAL;
+	}
+
+	i3c_bus_normaluse_lock(master->bus);
+	ret = master->ops->priv_xfers(dev, xfers, nxfers);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_device_do_priv_xfers);
+
+/**
+ * i3c_device_get_info() - get I3C device information
+ *
+ * @dev: device we want information on
+ * @info: the information object to fill in
+ *
+ * Retrieve I3C dev info.
+ */
+void i3c_device_get_info(struct i3c_device *dev,
+			 struct i3c_device_info *info)
+{
+	if (info)
+		*info = dev->info;
+}
+EXPORT_SYMBOL_GPL(i3c_device_get_info);
+
+/**
+ * i3c_device_disable_ibi() - Disable IBIs coming from a specific device
+ * @dev: device on which IBIs should be disabled
+ *
+ * This function disable IBIs coming from a specific device and wait for
+ * all pending IBIs to be processed.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_disable_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	int ret;
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (!dev->ibi) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = master->ops->disable_ibi(dev);
+	if (ret)
+		goto out;
+
+	reinit_completion(&dev->ibi->all_ibis_handled);
+	if (atomic_read(&dev->ibi->pending_ibis))
+		wait_for_completion(&dev->ibi->all_ibis_handled);
+
+	dev->ibi->enabled = false;
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_device_disable_ibi);
+
+/**
+ * i3c_device_enable_ibi() - Enable IBIs coming from a specific device
+ * @dev: device on which IBIs should be enabled
+ *
+ * This function enable IBIs coming from a specific device and wait for
+ * all pending IBIs to be processed. This should be called on a device
+ * where i3c_device_request_ibi() has succeeded.
+ *
+ * Note that IBIs from this device might be received before this function
+ * returns to its caller.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_enable_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	int ret;
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (!dev->ibi) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = master->ops->enable_ibi(dev);
+	if (!ret)
+		dev->ibi->enabled = true;
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_device_enable_ibi);
+
+/**
+ * i3c_device_request_ibi() - Request an IBI
+ * @dev: device for which we should enable IBIs
+ * @req: setup requested for this IBI
+ *
+ * This function is responsible for pre-allocating all resources needed to
+ * process IBIs coming from @dev. When this function returns, the IBI is not
+ * enabled until i3c_device_enable_ibi() is called.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_request_ibi(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	struct i3c_device_ibi_info *ibi;
+	int ret;
+
+	if (!master->ops->request_ibi)
+		return -ENOTSUPP;
+
+	if (!req->handler || !req->num_slots)
+		return -EINVAL;
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (dev->ibi) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ibi = kzalloc(sizeof(*ibi), GFP_KERNEL);
+	if (!ibi) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	atomic_set(&ibi->pending_ibis, 0);
+	init_completion(&ibi->all_ibis_handled);
+	ibi->handler = req->handler;
+	ibi->max_payload_len = req->max_payload_len;
+
+	dev->ibi = ibi;
+	ret = master->ops->request_ibi(dev, req);
+	if (ret) {
+		kfree(ibi);
+		dev->ibi = NULL;
+	}
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_device_request_ibi);
+
+/**
+ * i3c_device_free_ibi() - Free all resources needed for IBI handling
+ * @dev: device on which you want to release IBI resources
+ *
+ * This function is responsible for de-allocating resources previously
+ * allocated by i3c_device_request_ibi(). It should be called after disabling
+ * IBIs with i3c_device_disable_ibi().
+ */
+void i3c_device_free_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (!dev->ibi)
+		goto out;
+
+	if (WARN_ON(dev->ibi->enabled))
+		BUG_ON(i3c_device_disable_ibi(dev));
+
+	master->ops->free_ibi(dev);
+	kfree(dev->ibi);
+	dev->ibi = NULL;
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+}
+EXPORT_SYMBOL_GPL(i3c_device_free_ibi);
+
+/**
+ * i3cdev_to_dev() - Returns the device embedded in @i3cdev
+ * @i3cdev: I3C device
+ *
+ * Return: a pointer to a device object.
+ */
+struct device *i3cdev_to_dev(struct i3c_device *i3cdev)
+{
+	return &i3cdev->dev;
+}
+EXPORT_SYMBOL_GPL(i3cdev_to_dev);
+
+/**
+ * dev_to_i3cdev() - Returns the I3C device containing @dev
+ * @dev: device object
+ *
+ * Return: a pointer to an I3C device object.
+ */
+struct i3c_device *dev_to_i3cdev(struct device *dev)
+{
+	return container_of(dev, struct i3c_device, dev);
+}
+EXPORT_SYMBOL_GPL(dev_to_i3cdev);
+
+/**
+ * i3c_driver_register_with_owner() - register an I3C device driver
+ *
+ * @drv: driver to register
+ * @owner: module that owns this driver
+ *
+ * Register @drv to the core.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_driver_register_with_owner(struct i3c_driver *drv, struct module *owner)
+{
+	drv->driver.owner = owner;
+	drv->driver.bus = &i3c_bus_type;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(i3c_driver_register_with_owner);
+
+/**
+ * i3c_driver_unregister() - unregister an I3C device driver
+ *
+ * @drv: driver to unregister
+ *
+ * Unregister @drv.
+ */
+void i3c_driver_unregister(struct i3c_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(i3c_driver_unregister);
diff --git a/drivers/i3c/internals.h b/drivers/i3c/internals.h
new file mode 100644
index 000000000000..155e1145357a
--- /dev/null
+++ b/drivers/i3c/internals.h
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_INTERNALS_H
+#define I3C_INTERNALS_H
+
+#include <linux/i3c/master.h>
+
+extern struct bus_type i3c_bus_type;
+extern const struct device_type i3c_master_type;
+extern const struct device_type i3c_device_type;
+
+void i3c_bus_unref(struct i3c_bus *bus);
+struct i3c_bus *i3c_bus_create(struct device *parent);
+void i3c_bus_unregister(struct i3c_bus *bus);
+int i3c_bus_register(struct i3c_bus *i3cbus);
+int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr);
+bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr);
+void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr,
+				  enum i3c_addr_slot_status status);
+enum i3c_addr_slot_status i3c_bus_get_addr_slot_status(struct i3c_bus *bus,
+						       u16 addr);
+
+#endif /* I3C_INTERNAL_H */
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
new file mode 100644
index 000000000000..81a91b1cf98c
--- /dev/null
+++ b/drivers/i3c/master.c
@@ -0,0 +1,1723 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include "internals.h"
+
+static struct i3c_master_controller *
+i2c_adapter_to_i3c_master(struct i2c_adapter *adap)
+{
+	return container_of(adap, struct i3c_master_controller, i2c);
+}
+
+static struct i2c_adapter *
+i3c_master_to_i2c_adapter(struct i3c_master_controller *master)
+{
+	return &master->i2c;
+}
+
+static struct i2c_device *
+i3c_master_alloc_i2c_dev(struct i3c_master_controller *master,
+			 const struct i2c_board_info *info, u8 lvr)
+{
+	struct i2c_device *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->common.bus = master->bus;
+	dev->info = *info;
+	dev->lvr = lvr;
+	dev->info.of_node = of_node_get(info->of_node);
+	i3c_bus_set_addr_slot_status(master->bus, info->addr,
+				     I3C_ADDR_SLOT_I2C_DEV);
+
+	return dev;
+}
+
+static int i3c_master_send_ccc_cmd_locked(struct i3c_master_controller *master,
+					  struct i3c_ccc_cmd *cmd)
+{
+	if (!cmd || !master)
+		return -EINVAL;
+
+	if (WARN_ON(master->init_done &&
+		    !rwsem_is_locked(&master->bus->lock)))
+		return -EINVAL;
+
+	if (!master->ops->send_ccc_cmd)
+		return -ENOTSUPP;
+
+	if ((cmd->id & I3C_CCC_DIRECT) && (!cmd->dests || !cmd->ndests))
+		return -EINVAL;
+
+	if (master->ops->supports_ccc_cmd &&
+	    !master->ops->supports_ccc_cmd(master, cmd))
+		return -ENOTSUPP;
+
+	return master->ops->send_ccc_cmd(master, cmd);
+}
+
+static struct i2c_device *
+i3c_master_find_i2c_dev_by_addr(const struct i3c_master_controller *master,
+				u16 addr)
+{
+	struct i2c_device *dev;
+
+	i3c_bus_for_each_i2cdev(master->bus, dev) {
+		if (dev->client->addr == addr)
+			return dev;
+	}
+
+	return NULL;
+}
+
+/**
+ * i3c_master_get_free_addr() - get a free address on the bus
+ * @master: I3C master object
+ * @start_addr: where to start searching
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: the first free address starting at @start_addr (included) or -ENOMEM
+ * if there's no more address available.
+ */
+int i3c_master_get_free_addr(struct i3c_master_controller *master,
+			     u8 start_addr)
+{
+	return i3c_bus_get_free_addr(master->bus, start_addr);
+}
+EXPORT_SYMBOL_GPL(i3c_master_get_free_addr);
+
+static void i3c_device_release(struct device *dev)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+
+	if (i3cdev->info.static_addr)
+		i3c_bus_set_addr_slot_status(i3cdev->common.bus,
+					     i3cdev->info.static_addr,
+					     I3C_ADDR_SLOT_FREE);
+
+	if (i3cdev->info.dyn_addr)
+		i3c_bus_set_addr_slot_status(i3cdev->common.bus,
+					     i3cdev->info.dyn_addr,
+					     I3C_ADDR_SLOT_FREE);
+
+	of_node_put(dev->of_node);
+	kfree(i3cdev);
+}
+
+static struct i3c_device *
+i3c_master_alloc_i3c_dev(struct i3c_master_controller *master,
+			 const struct i3c_device_info *info,
+			 const struct device_type *devtype)
+{
+	struct i3c_device *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->common.bus = master->bus;
+	dev->dev.parent = &master->bus->dev;
+	dev->dev.type = devtype;
+	dev->dev.bus = &i3c_bus_type;
+	dev->dev.release = i3c_device_release;
+	dev->info = *info;
+	mutex_init(&dev->ibi_lock);
+	dev_set_name(&dev->dev, "%d-%llx", master->bus->id, info->pid);
+
+	device_initialize(&dev->dev);
+
+	if (info->static_addr)
+		i3c_bus_set_addr_slot_status(master->bus, info->static_addr,
+					     I3C_ADDR_SLOT_I3C_DEV);
+
+	if (info->dyn_addr)
+		i3c_bus_set_addr_slot_status(master->bus, info->dyn_addr,
+					     I3C_ADDR_SLOT_I3C_DEV);
+
+	return dev;
+}
+
+/**
+ * i3c_master_set_info() - set master device information
+ * @master: master used to send frames on the bus
+ * @info: I3C device information
+ *
+ * Set master device info. This should be called from
+ * &i3c_master_controller_ops->bus_init().
+ *
+ * Not all &i3c_device_info fields are meaningful for a master device.
+ * Here is a list of fields that should be properly filled:
+ *
+ * - &i3c_device_info->dyn_addr
+ * - &i3c_device_info->bcr
+ * - &i3c_device_info->dcr
+ * - &i3c_device_info->pid
+ * - &i3c_device_info->hdr_cap if %I3C_BCR_HDR_CAP bit is set in
+ *   &i3c_device_info->bcr
+ *
+ * This function must be called with the bus lock held in maintenance mode.
+ *
+ * Return: 0 if @info contains valid information (not every piece of
+ * information can be checked, but we can at least make sure @info->dyn_addr
+ * and @info->bcr are correct), -EINVAL otherwise.
+ */
+int i3c_master_set_info(struct i3c_master_controller *master,
+			const struct i3c_device_info *info)
+{
+	struct i3c_device *i3cdev;
+
+	if (!i3c_bus_dev_addr_is_avail(master->bus, info->dyn_addr))
+		return -EINVAL;
+
+	if (I3C_BCR_DEVICE_ROLE(info->bcr) == I3C_BCR_I3C_MASTER &&
+	    master->secondary)
+		return -EINVAL;
+
+	if (master->this)
+		return -EINVAL;
+
+	i3cdev = i3c_master_alloc_i3c_dev(master, info,	&i3c_master_type);
+	if (IS_ERR(i3cdev))
+		return PTR_ERR(i3cdev);
+
+	master->this = i3cdev;
+	master->bus->cur_master = master->this;
+	i3cdev->common.bus = master->bus;
+	i3cdev->common.master = master;
+	list_add_tail(&i3cdev->common.node, &master->bus->devs.i3c);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_set_info);
+
+static int i3c_master_rstdaa_locked(struct i3c_master_controller *master,
+				    u8 addr)
+{
+	struct i3c_ccc_cmd_dest dest = { };
+	struct i3c_ccc_cmd cmd = { };
+	enum i3c_addr_slot_status addrstat;
+	int ret;
+
+	if (!master)
+		return -EINVAL;
+
+	addrstat = i3c_bus_get_addr_slot_status(master->bus, addr);
+	if (addr != I3C_BROADCAST_ADDR && addrstat != I3C_ADDR_SLOT_I3C_DEV)
+		return -EINVAL;
+
+	dest.addr = addr;
+	cmd.dests = &dest;
+	cmd.ndests = 1;
+	cmd.rnw = false;
+	cmd.id = I3C_CCC_RSTDAA(addr == I3C_BROADCAST_ADDR);
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/**
+ * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment)
+ *				procedure
+ * @master: master used to send frames on the bus
+ *
+ * Send a ENTDAA CCC command to start a DAA procedure.
+ *
+ * Note that this function only sends the ENTDAA CCC command, all the logic
+ * behind dynamic address assignment has to be handled in the I3C master
+ * driver.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_entdaa_locked(struct i3c_master_controller *master)
+{
+	struct i3c_ccc_cmd_dest dest = { };
+	struct i3c_ccc_cmd cmd = { };
+	int ret;
+
+	dest.addr = I3C_BROADCAST_ADDR;
+	cmd.dests = &dest;
+	cmd.ndests = 1;
+	cmd.rnw = false;
+	cmd.id = I3C_CCC_ENTDAA;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked);
+
+/**
+ * i3c_master_disec_locked() - send a DISEC CCC command
+ * @master: master used to send frames on the bus
+ * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
+ * @evts: events to disable
+ *
+ * Send a DISEC CCC command to disable some or all events coming from a
+ * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
+			    u8 evts)
+{
+	struct i3c_ccc_events events = {
+		.events = evts,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = addr,
+		.payload.len = sizeof(events),
+		.payload.data = &events,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.id = I3C_CCC_DISEC(addr == I3C_BROADCAST_ADDR),
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+EXPORT_SYMBOL_GPL(i3c_master_disec_locked);
+
+/**
+ * i3c_master_enec_locked() - send an ENEC CCC command
+ * @master: master used to send frames on the bus
+ * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
+ * @evts: events to disable
+ *
+ * Sends an ENEC CCC command to enable some or all events coming from a
+ * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
+			   u8 evts)
+{
+	struct i3c_ccc_events events = {
+		.events = evts,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = addr,
+		.payload.len = sizeof(events),
+		.payload.data = &events,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.id = I3C_CCC_ENEC(addr == I3C_BROADCAST_ADDR),
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+EXPORT_SYMBOL_GPL(i3c_master_enec_locked);
+
+/**
+ * i3c_master_defslvs_locked() - send a DEFSLVS CCC command
+ * @master: master used to send frames on the bus
+ *
+ * Send a DEFSLVS CCC command containing all the devices known to the @master.
+ * This is useful when you have secondary masters on the bus to propagate
+ * device information.
+ *
+ * This should be called after all I3C devices have been discovered (in other
+ * words, after the DAA procedure has finished) and instantiated in
+ * i3c_master_controller_ops->bus_init().
+ * It should also be called if a master ACKed an Hot-Join request and assigned
+ * a dynamic address to the device joining the bus.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_defslvs_locked(struct i3c_master_controller *master)
+{
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = I3C_BROADCAST_ADDR,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.id = I3C_CCC_DEFSLVS,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	struct i3c_ccc_defslvs *defslvs;
+	struct i3c_ccc_dev_desc *desc;
+	struct i3c_device *i3cdev;
+	struct i2c_device *i2cdev;
+	struct i3c_bus *bus;
+	bool send = false;
+	int ndevs = 0, ret;
+
+	if (!master)
+		return -EINVAL;
+
+	bus = i3c_master_get_bus(master);
+	i3c_bus_for_each_i3cdev(bus, i3cdev) {
+		ndevs++;
+		if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) == I3C_BCR_I3C_MASTER)
+			send = true;
+	}
+
+	/* No other master on the bus, skip DEFSLVS. */
+	if (!send)
+		return 0;
+
+	i3c_bus_for_each_i2cdev(bus, i2cdev)
+		ndevs++;
+
+	dest.payload.len = sizeof(*defslvs) +
+			   ((ndevs - 1) * sizeof(struct i3c_ccc_dev_desc));
+	defslvs = kzalloc(dest.payload.len, GFP_KERNEL);
+	if (!defslvs)
+		return -ENOMEM;
+
+	dest.payload.data = defslvs;
+
+	defslvs->count = ndevs;
+	defslvs->master.bcr = master->this->info.bcr;
+	defslvs->master.dcr = master->this->info.dcr;
+	defslvs->master.dyn_addr = master->this->info.dyn_addr;
+	defslvs->master.static_addr = I3C_BROADCAST_ADDR;
+
+	desc = defslvs->slaves;
+	i3c_bus_for_each_i2cdev(bus, i2cdev) {
+		desc->lvr = i2cdev->lvr;
+		desc->static_addr = i2cdev->info.addr;
+		desc++;
+	}
+
+	i3c_bus_for_each_i3cdev(bus, i3cdev) {
+		/* Skip the I3C dev representing this master. */
+		if (i3cdev == master->this)
+			continue;
+
+		desc->bcr = i3cdev->info.bcr;
+		desc->dcr = i3cdev->info.dcr;
+		desc->dyn_addr = i3cdev->info.dyn_addr;
+		desc->static_addr = i3cdev->info.static_addr;
+		desc++;
+	}
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	kfree(defslvs);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_master_defslvs_locked);
+
+static int i3c_master_setdasa_locked(struct i3c_master_controller *master,
+				     u8 static_addr, u8 dyn_addr)
+{
+	struct i3c_ccc_setda setda = {
+		.addr = dyn_addr << 1,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = static_addr,
+		.payload.len = sizeof(setda),
+		.payload.data = &setda,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = false,
+		.id = I3C_CCC_SETDASA,
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	if (!dyn_addr || !static_addr)
+		return -EINVAL;
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+
+static int i3c_master_setnewda_locked(struct i3c_master_controller *master,
+				      u8 oldaddr, u8 newaddr)
+{
+	struct i3c_ccc_setda setda = {
+		.addr = newaddr << 1,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = oldaddr,
+		.payload.len = sizeof(setda),
+		.payload.data = &setda,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = false,
+		.id = I3C_CCC_SETNEWDA,
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	if (!oldaddr || !newaddr)
+		return -EINVAL;
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+
+static int i3c_master_getmrl_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_mrl mrl;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(mrl),
+		.payload.data = &mrl,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETMRL,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	/*
+	 * When the device does not have IBI payload GETMRL only returns 2
+	 * bytes of data.
+	 */
+	if (!(info->bcr & I3C_BCR_IBI_PAYLOAD))
+		dest.payload.len -= 1;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != sizeof(mrl))
+		return -EIO;
+
+	info->max_read_len = be16_to_cpu(mrl.read_len);
+
+	if (info->bcr & I3C_BCR_IBI_PAYLOAD)
+		info->max_ibi_len = mrl.ibi_len;
+
+	return 0;
+}
+
+static int i3c_master_getmwl_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_mwl mwl;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(mwl),
+		.payload.data = &mwl,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETMWL,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != sizeof(mwl))
+		return -EIO;
+
+	info->max_write_len = be16_to_cpu(mwl.len);
+
+	return 0;
+}
+
+static int i3c_master_getmxds_locked(struct i3c_master_controller *master,
+				     struct i3c_device_info *info)
+{
+	struct i3c_ccc_getmxds getmaxds;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(getmaxds),
+		.payload.data = &getmaxds,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETMXDS,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != 2 && dest.payload.len != 5)
+		return -EIO;
+
+	info->max_read_ds = getmaxds.maxrd;
+	info->max_read_ds = getmaxds.maxwr;
+	if (dest.payload.len == 5)
+		info->max_read_turnaround = getmaxds.maxrdturn[0] |
+					    ((u32)getmaxds.maxrdturn[1] << 8) |
+					    ((u32)getmaxds.maxrdturn[2] << 16);
+
+	return 0;
+}
+
+static int i3c_master_gethdrcap_locked(struct i3c_master_controller *master,
+				       struct i3c_device_info *info)
+{
+	struct i3c_ccc_gethdrcap gethdrcap;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(gethdrcap),
+		.payload.data = &gethdrcap,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETHDRCAP,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != 1)
+		return -EIO;
+
+	info->hdr_cap = gethdrcap.modes;
+
+	return 0;
+}
+
+static int i3c_master_getpid_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_getpid getpid;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(struct i3c_ccc_getpid),
+		.payload.data = &getpid,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETPID,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret, i;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	info->pid = 0;
+	for (i = 0; i < sizeof(getpid.pid); i++) {
+		int sft = (sizeof(getpid.pid) - i - 1) * 8;
+
+		info->pid |= (u64)getpid.pid[i] << sft;
+	}
+
+	return 0;
+}
+
+static int i3c_master_getbcr_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_getbcr getbcr;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(struct i3c_ccc_getbcr),
+		.payload.data = &getbcr,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETBCR,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	info->bcr = getbcr.bcr;
+
+	return 0;
+}
+
+static int i3c_master_getdcr_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_getdcr getdcr;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(struct i3c_ccc_getdcr),
+		.payload.data = &getdcr,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETDCR,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	info->dcr = getdcr.dcr;
+
+	return 0;
+}
+
+static int i3c_master_retrieve_dev_info(struct i3c_master_controller *master,
+					struct i3c_device_info *info, u8 addr)
+{
+	enum i3c_addr_slot_status slot_status;
+	int ret;
+
+	if (!master || !info)
+		return -EINVAL;
+
+	memset(info, 0, sizeof(*info));
+	info->dyn_addr = addr;
+
+	slot_status = i3c_bus_get_addr_slot_status(master->bus,
+						   info->dyn_addr);
+	if (slot_status == I3C_ADDR_SLOT_RSVD ||
+	    slot_status == I3C_ADDR_SLOT_I2C_DEV)
+		return -EINVAL;
+
+	ret = i3c_master_getpid_locked(master, info);
+	if (ret)
+		return ret;
+
+	ret = i3c_master_getbcr_locked(master, info);
+	if (ret)
+		return ret;
+
+	ret = i3c_master_getdcr_locked(master, info);
+	if (ret)
+		return ret;
+
+	if (info->bcr & I3C_BCR_MAX_DATA_SPEED_LIM) {
+		ret = i3c_master_getmxds_locked(master, info);
+		if (ret)
+			return ret;
+	}
+
+	if (info->bcr & I3C_BCR_IBI_PAYLOAD)
+		info->max_ibi_len = 1;
+
+	i3c_master_getmrl_locked(master, info);
+	i3c_master_getmwl_locked(master, info);
+
+	if (info->bcr & I3C_BCR_HDR_CAP) {
+		ret = i3c_master_gethdrcap_locked(master, info);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int i3c_master_attach_i3c_dev(struct i3c_master_controller *master,
+				     struct i3c_device *dev)
+{
+	int ret;
+
+	/*
+	 * We don't attach devices to the controller until they are
+	 * addressable on the bus.
+	 */
+	if (!dev->info.static_addr && !dev->info.dyn_addr)
+		return 0;
+
+	dev->common.master = master;
+
+	/* Do not attach the master device itself. */
+	if (master->this == dev)
+		return 0;
+
+	if (!master->ops->attach_i3c_dev)
+		return 0;
+
+	ret = master->ops->attach_i3c_dev(dev);
+	if (ret)
+		dev->common.master = NULL;
+
+	return ret;
+}
+
+static void i3c_master_reattach_i3c_dev(struct i3c_device *dev,
+					u8 old_dyn_addr)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+
+	if (master->ops->reattach_i3c_dev)
+		master->ops->reattach_i3c_dev(dev, old_dyn_addr);
+
+	if (old_dyn_addr)
+		i3c_bus_set_addr_slot_status(master->bus, old_dyn_addr,
+					     I3C_ADDR_SLOT_FREE);
+}
+
+static void i3c_master_detach_i3c_dev(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+
+	if (!master)
+		return;
+
+	/* Do not detach the master device itself. */
+	if (master->this == dev)
+		return;
+
+	if (master->ops->detach_i3c_dev)
+		master->ops->detach_i3c_dev(dev);
+
+	dev->common.master = NULL;
+}
+
+static int i3c_master_attach_i2c_dev(struct i3c_master_controller *master,
+				     struct i2c_device *dev)
+{
+	int ret;
+
+	dev->common.master = master;
+
+	if (!master->ops->attach_i2c_dev)
+		return 0;
+
+	ret = master->ops->attach_i2c_dev(dev);
+	if (ret)
+		dev->common.master = NULL;
+
+	return ret;
+}
+
+static void i3c_master_detach_i2c_dev(struct i2c_device *dev)
+{
+	struct i3c_master_controller *master = i2c_device_get_master(dev);
+
+	if (!master)
+		return;
+
+	if (master->ops->detach_i2c_dev)
+		master->ops->detach_i2c_dev(dev);
+
+	dev->common.master = NULL;
+}
+
+static void i3c_master_pre_assign_dyn_addr(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	struct i3c_device_info info;
+	int ret;
+
+	if (!dev->init_dyn_addr || !dev->info.static_addr ||
+	    dev->info.dyn_addr)
+		return;
+
+	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
+					dev->init_dyn_addr);
+	if (ret)
+		return;
+
+	ret = i3c_master_retrieve_dev_info(master, &info, dev->init_dyn_addr);
+	if (ret)
+		goto err_rstdaa;
+
+	dev->info = info;
+
+	i3c_master_reattach_i3c_dev(dev, 0);
+
+	return;
+
+err_rstdaa:
+	i3c_master_rstdaa_locked(master, dev->init_dyn_addr);
+}
+
+static void
+i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+	int ret;
+
+	if (!master->init_done)
+		return;
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		if (i3cdev->regfailed || device_is_registered(&i3cdev->dev) ||
+		    !i3cdev->info.dyn_addr)
+			continue;
+
+		ret = device_add(&i3cdev->dev);
+		if (ret) {
+			dev_err(master->parent,
+				"Failed to add I3C device (err = %d)\n", ret);
+			i3cdev->regfailed = true;
+		}
+	}
+}
+
+/**
+ * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment)
+ * @master: master doing the DAA
+ *
+ * This function is instantiating an I3C device object and adding it to the
+ * I3C device list. All device information are automatically retrieved using
+ * standard CCC commands.
+ *
+ * The I3C device object is returned in case the master wants to attach
+ * private data to it using i3c_device_set_master_data().
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: a 0 in case of success, an negative error code otherwise.
+ */
+int i3c_master_do_daa(struct i3c_master_controller *master)
+{
+	int ret;
+
+	i3c_bus_maintenance_lock(master->bus);
+	ret = master->ops->do_daa(master);
+	i3c_bus_maintenance_unlock(master->bus);
+
+	if (ret)
+		return ret;
+
+	i3c_bus_normaluse_lock(master->bus);
+	i3c_master_register_new_i3c_devs(master);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_do_daa);
+
+/**
+ * i3c_master_bus_init() - initialize an I3C bus
+ * @master: main master initializing the bus
+ *
+ * This function is following all initialisation steps described in the I3C
+ * specification:
+ *
+ * 1/ Attach I2C and statically defined I3C devs to the master so that the
+ *    master can fill its internal device table appropriately
+ * 2/ Call master's ->bus_init() method to initialize the master controller.
+ *    That's usually where the bus mode is selected (pure bus or mixed
+ *    fast/slow bus)
+ * 3/ Instruct all devices on the bus to drop their dynamic address. This is
+ *    particularly important when the bus was previously configured by someone
+ *    else (for example the bootloader)
+ * 4/ Disable all slave events.
+ * 5/ Pre-assign dynamic addresses requested by the FW with SETDASA for I3C
+ *    devices that have a static address
+ * 6/ Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all
+ *    remaining I3C devices
+ *
+ * Once this is done, all I3C and I2C devices should be usable.
+ *
+ * Return: a 0 in case of success, an negative error code otherwise.
+ */
+static int i3c_master_bus_init(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+	struct i2c_device *i2cdev;
+	int ret;
+
+	/*
+	 * First attach all devices with static definitions provided by the
+	 * FW.
+	 */
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev) {
+		ret = i3c_master_attach_i2c_dev(master, i2cdev);
+		if (ret)
+			goto err_detach_devs;
+	}
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		ret = i3c_master_attach_i3c_dev(master, i3cdev);
+		if (ret)
+			goto err_detach_devs;
+	}
+
+	/*
+	 * Now execute the controller specific ->bus_init() routine, which
+	 * might configure its internal logic to match the bus limitations.
+	 */
+	ret = master->ops->bus_init(master);
+	if (ret)
+		goto err_detach_devs;
+
+	/*
+	 * The master device should have been instantiated in ->bus_init(),
+	 * complain if this was not the case.
+	 */
+	if (!master->this) {
+		dev_err(master->parent,
+			"master_set_info() was not called in ->bus_init()\n");
+		ret = -EINVAL;
+		goto err_bus_cleanup;
+	}
+
+	/*
+	 * Reset all dynamic address that may have been assigned before
+	 * (assigned by the bootloader for example).
+	 */
+	ret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);
+	if (ret)
+		goto err_bus_cleanup;
+
+	/* Disable all slave events before starting DAA. */
+	ret = i3c_master_disec_locked(master, I3C_BROADCAST_ADDR,
+				      I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR |
+				      I3C_CCC_EVENT_HJ);
+	if (ret)
+		goto err_bus_cleanup;
+
+	/*
+	 * Pre-assign dynamic address and retrieve device information if
+	 * needed.
+	 */
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev)
+		i3c_master_pre_assign_dyn_addr(i3cdev);
+
+	ret = i3c_master_do_daa(master);
+	if (ret)
+		goto err_rstdaa;
+
+	return 0;
+
+err_rstdaa:
+	i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);
+
+err_bus_cleanup:
+	if (master->ops->bus_cleanup)
+		master->ops->bus_cleanup(master);
+
+err_detach_devs:
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev)
+		i3c_master_detach_i3c_dev(i3cdev);
+
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev)
+		i3c_master_detach_i2c_dev(i2cdev);
+
+	return ret;
+}
+
+static void i3c_master_bus_cleanup(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+	struct i2c_device *i2cdev;
+
+	if (master->ops->bus_cleanup)
+		master->ops->bus_cleanup(master);
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev)
+		i3c_master_detach_i3c_dev(i3cdev);
+
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev)
+		i3c_master_detach_i2c_dev(i2cdev);
+}
+
+static struct i3c_device *
+i3c_master_search_i3c_dev_by_pid(struct i3c_master_controller *master, u64 pid)
+{
+	struct i3c_device *i3cdev;
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		if (i3cdev->info.pid == pid)
+			return i3cdev;
+	}
+
+	return NULL;
+}
+
+/**
+ * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
+ * @master: master used to send frames on the bus
+ * @addr: I3C slave dynamic address assigned to the device
+ *
+ * This function is instantiating an I3C device object and adding it to the
+ * I3C device list. All device information are automatically retrieved using
+ * standard CCC commands.
+ *
+ * The I3C device object is returned in case the master wants to attach
+ * private data to it using i3c_device_set_master_data().
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: a 0 in case of success, an negative error code otherwise.
+ */
+int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
+				  u8 addr)
+{
+	u8 old_dyn_addr, expected_dyn_addr;
+	enum i3c_addr_slot_status status;
+	struct i3c_device *i3cdev;
+	struct i3c_device_info info;
+	int ret;
+
+	if (!master)
+		return -EINVAL;
+
+	status = i3c_bus_get_addr_slot_status(master->bus, addr);
+	if (status != I3C_ADDR_SLOT_FREE)
+		return -EINVAL;
+
+	ret = i3c_master_retrieve_dev_info(master, &info, addr);
+	if (ret)
+		return ret;
+
+	i3cdev = i3c_master_search_i3c_dev_by_pid(master, info.pid);
+	if (!i3cdev) {
+		i3cdev = i3c_master_alloc_i3c_dev(master, &info,
+						  &i3c_device_type);
+		if (IS_ERR(i3cdev))
+			return PTR_ERR(i3cdev);
+
+		list_add_tail(&i3cdev->common.node, &master->bus->devs.i3c);
+	}
+
+	old_dyn_addr = i3cdev->info.dyn_addr;
+	i3cdev->info.dyn_addr = addr;
+
+	if (!i3cdev->common.master) {
+		ret = i3c_master_attach_i3c_dev(master, i3cdev);
+		if (ret)
+			goto err_put_dev;
+	} else {
+		i3c_master_reattach_i3c_dev(i3cdev, old_dyn_addr);
+	}
+
+	/*
+	 * Depending on our previous state, the expected dynamic address might
+	 * differ:
+	 * - if the device already had a dynamic address assigned, let's try to
+	 *   re-apply this one
+	 * - if the device did not have a dynamic address and the firmware
+	 *   requested a specific address, pick this one
+	 * - in any other case, keep the address automatically assigned by the
+	 *   master
+	 */
+	if (old_dyn_addr)
+		expected_dyn_addr = old_dyn_addr;
+	else if (i3cdev->init_dyn_addr)
+		expected_dyn_addr = i3cdev->init_dyn_addr;
+	else
+		expected_dyn_addr = i3cdev->info.dyn_addr;
+
+	if (i3cdev->info.dyn_addr != expected_dyn_addr) {
+		/*
+		 * Try to apply the expected dynamic address. If it fails, keep
+		 * the address assigned by the master.
+		 */
+		ret = i3c_master_setnewda_locked(master,
+						 i3cdev->info.dyn_addr,
+						 expected_dyn_addr);
+		if (!ret) {
+			old_dyn_addr = i3cdev->info.dyn_addr;
+			i3cdev->info.dyn_addr = expected_dyn_addr;
+			i3c_master_reattach_i3c_dev(i3cdev, old_dyn_addr);
+		}
+	}
+
+	return 0;
+
+err_put_dev:
+	list_del(&i3cdev->common.node);
+	put_device(&i3cdev->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked);
+
+#define OF_I3C_REG1_IS_I2C_DEV			BIT(31)
+
+static int of_i3c_master_add_i2c_dev(struct i3c_master_controller *master,
+				     struct device_node *node, u32 *reg)
+{
+	struct device *dev = master->parent;
+	struct i2c_board_info info = { };
+	struct i2c_device *i2cdev;
+	/* LVR is encoded in the lowest byte of reg[1]. */
+	u8 lvr = reg[1];
+	int ret;
+
+	ret = of_i2c_get_board_info(master->parent, node, &info);
+	if (ret)
+		return ret;
+
+	/*
+	 * We do not register the I2C device here, because the bus is not
+	 * necessarily ready to transmit I2C frames, and the I2C adapter has
+	 * not been registered yet.
+	 * This is done in i3c_master_i2c_adapter_init() once everything is
+	 * ready.
+	 */
+	i2cdev = i3c_master_alloc_i2c_dev(master, &info, lvr);
+	if (IS_ERR(i2cdev)) {
+		dev_err(dev, "Failed to allocate device %04x\n", info.addr);
+		return ret;
+	}
+
+	if (lvr & I3C_LVR_I2C_FM_MODE)
+		master->bus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
+
+	list_add_tail(&i2cdev->common.node, &master->bus->devs.i2c);
+
+	return 0;
+}
+
+static int of_i3c_master_add_i3c_dev(struct i3c_master_controller *master,
+				     struct device_node *node, u32 *reg)
+{
+	struct i3c_device_info info = { };
+	enum i3c_addr_slot_status addrstatus;
+	struct i3c_device *i3cdev;
+	u32 init_dyn_addr = 0;
+
+	if (reg[0]) {
+		if (reg[0] > I3C_MAX_ADDR)
+			return -EINVAL;
+
+		addrstatus = i3c_bus_get_addr_slot_status(master->bus,
+								  reg[0]);
+		if (addrstatus != I3C_ADDR_SLOT_FREE)
+			return -EINVAL;
+	}
+
+	info.static_addr = reg[0];
+
+	if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) {
+		if (init_dyn_addr > I3C_MAX_ADDR)
+			return -EINVAL;
+
+		addrstatus = i3c_bus_get_addr_slot_status(master->bus,
+							  init_dyn_addr);
+		if (addrstatus != I3C_ADDR_SLOT_FREE)
+			return -EINVAL;
+	}
+
+	info.pid = ((u64)reg[1] << 32) | reg[2];
+
+	if ((info.pid & GENMASK_ULL(63, 48)) ||
+	    I3C_PID_RND_LOWER_32BITS(info.pid))
+		return -EINVAL;
+
+	i3cdev = i3c_master_alloc_i3c_dev(master, &info, &i3c_device_type);
+	if (IS_ERR(i3cdev))
+		return PTR_ERR(i3cdev);
+
+	i3cdev->init_dyn_addr = init_dyn_addr;
+	i3cdev->dev.of_node = node;
+	list_add_tail(&i3cdev->common.node, &master->bus->devs.i3c);
+
+	return 0;
+}
+
+static int of_i3c_master_add_dev(struct i3c_master_controller *master,
+				 struct device_node *node)
+{
+	u32 reg[3];
+	int ret;
+
+	if (!master || !node)
+		return -EINVAL;
+
+	ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg));
+	if (ret)
+		return ret;
+
+	if (reg[1] & OF_I3C_REG1_IS_I2C_DEV)
+		ret = of_i3c_master_add_i2c_dev(master, node, reg);
+	else
+		ret = of_i3c_master_add_i3c_dev(master, node, reg);
+
+	return ret;
+}
+
+static int of_populate_i3c_bus(struct i3c_master_controller *master)
+{
+	struct device *dev = &master->bus->dev;
+	struct device_node *i3cbus_np = dev->of_node;
+	struct device_node *node;
+	int ret;
+	u32 val;
+
+	if (!i3cbus_np)
+		return 0;
+
+	for_each_available_child_of_node(i3cbus_np, node) {
+		ret = of_i3c_master_add_dev(master, node);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * The user might want to limit I2C and I3C speed in case some devices
+	 * on the bus are not supporting typical rates, or if the bus topology
+	 * prevents it from using max possible rate.
+	 */
+	if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val))
+		master->bus->scl_rate.i2c = val;
+
+	if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val))
+		master->bus->scl_rate.i3c = val;
+
+	return 0;
+}
+
+static int i3c_master_i2c_adapter_xfer(struct i2c_adapter *adap,
+				       struct i2c_msg *xfers, int nxfers)
+{
+	struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
+	struct i2c_device *dev;
+	int i, ret;
+	u16 addr;
+
+	if (!xfers || !master || nxfers <= 0)
+		return -EINVAL;
+
+	if (!master->ops->i2c_xfers)
+		return -ENOTSUPP;
+
+	/* Doing transfers to different devices is not supported. */
+	addr = xfers[0].addr;
+	for (i = 1; i < nxfers; i++) {
+		if (addr != xfers[i].addr)
+			return -ENOTSUPP;
+	}
+
+	i3c_bus_normaluse_lock(master->bus);
+	dev = i3c_master_find_i2c_dev_by_addr(master, addr);
+	if (!dev)
+		ret = -ENOENT;
+	else
+		ret = master->ops->i2c_xfers(dev, xfers, nxfers);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret ? ret : nxfers;
+}
+
+static u32 i3c_master_i2c_functionalities(struct i2c_adapter *adap)
+{
+	struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
+
+	return master->ops->i2c_funcs(master);
+}
+
+static const struct i2c_algorithm i3c_master_i2c_algo = {
+	.master_xfer = i3c_master_i2c_adapter_xfer,
+	.functionality = i3c_master_i2c_functionalities,
+};
+
+static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
+{
+	struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master);
+	struct i2c_device *i2cdev;
+	int ret;
+
+	adap->dev.parent = master->parent;
+	adap->owner = master->parent->driver->owner;
+	adap->algo = &i3c_master_i2c_algo;
+	strncpy(adap->name, dev_name(master->parent), sizeof(adap->name));
+
+	/* FIXME: Should we allow i3c masters to override these values? */
+	adap->timeout = 1000;
+	adap->retries = 3;
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		return ret;
+
+	/*
+	 * We silently ignore failures here. The bus should keep working
+	 * correctly even if one or more i2c devices are not registered.
+	 */
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev)
+		i2cdev->client = i2c_new_device(adap, &i2cdev->info);
+
+	return 0;
+}
+
+static void i3c_master_i2c_adapter_cleanup(struct i3c_master_controller *master)
+{
+	i2c_del_adapter(&master->i2c);
+}
+
+static void i3c_master_unregister_i3c_devs(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		if (device_is_registered(&i3cdev->dev))
+			device_del(&i3cdev->dev);
+	}
+}
+
+/**
+ * i3c_master_queue_ibi() - Queue an IBI
+ * @dev: the device this IBI is coming from
+ * @slot: the IBI slot used to store the payload
+ *
+ * Queue an IBI to the controller workqueue. The IBI handler attached to
+ * the dev will be called from a workqueue context.
+ */
+void i3c_master_queue_ibi(struct i3c_device *dev, struct i3c_ibi_slot *slot)
+{
+	atomic_inc(&dev->ibi->pending_ibis);
+	queue_work(dev->common.master->wq, &slot->work);
+}
+EXPORT_SYMBOL_GPL(i3c_master_queue_ibi);
+
+static void i3c_master_handle_ibi(struct work_struct *work)
+{
+	struct i3c_ibi_slot *slot = container_of(work, struct i3c_ibi_slot,
+						 work);
+	struct i3c_device *dev = slot->dev;
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	struct i3c_ibi_payload payload;
+
+	payload.data = slot->data;
+	payload.len = slot->len;
+
+	dev->ibi->handler(dev, &payload);
+	master->ops->recycle_ibi_slot(dev, slot);
+	if (atomic_dec_and_test(&dev->ibi->pending_ibis))
+		complete(&dev->ibi->all_ibis_handled);
+}
+
+static void i3c_master_init_ibi_slot(struct i3c_device *dev,
+				     struct i3c_ibi_slot *slot)
+{
+	slot->dev = dev;
+	INIT_WORK(&slot->work, i3c_master_handle_ibi);
+}
+
+struct i3c_generic_ibi_slot {
+	struct list_head node;
+	struct i3c_ibi_slot base;
+};
+
+struct i3c_generic_ibi_pool {
+	spinlock_t lock;
+	unsigned int num_slots;
+	struct list_head free_slots;
+	struct list_head pending;
+};
+
+/**
+ * i3c_generic_ibi_free_pool() - Free a generic IBI pool
+ * @pool: the IBI pool to free
+ *
+ * Free all IBI slots allated by a generic IBI pool.
+ */
+void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool)
+{
+	struct i3c_generic_ibi_slot *slot;
+	unsigned int nslots = 0;
+
+	while (!list_empty(&pool->free_slots)) {
+		slot = list_first_entry(&pool->free_slots,
+					struct i3c_generic_ibi_slot, node);
+		list_del(&slot->node);
+		kfree(slot->base.data);
+		kfree(slot);
+		nslots++;
+	}
+
+	/*
+	 * If the number of freed slots is not equal to the number of allocated
+	 * slots we have a leak somewhere.
+	 */
+	WARN_ON(nslots != pool->num_slots);
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_free_pool);
+
+/**
+ * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool
+ * @dev: the device this pool will be used for
+ * @req: IBI setup request describing what the device driver expects
+ *
+ * Create a generic IBI pool based on the information provided in @req.
+ *
+ * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise.
+ */
+struct i3c_generic_ibi_pool *
+i3c_generic_ibi_alloc_pool(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req)
+{
+	struct i3c_generic_ibi_pool *pool;
+	struct i3c_generic_ibi_slot *slot;
+	unsigned int i;
+	int ret;
+
+	pool = kzalloc(sizeof(*pool), GFP_KERNEL);
+	if (!pool)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&pool->lock);
+	INIT_LIST_HEAD(&pool->free_slots);
+	INIT_LIST_HEAD(&pool->pending);
+
+	for (i = 0; i < req->num_slots; i++) {
+		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+		if (!slot)
+			return ERR_PTR(-ENOMEM);
+
+		i3c_master_init_ibi_slot(dev, &slot->base);
+
+		if (req->max_payload_len) {
+			slot->base.data = kzalloc(req->max_payload_len,
+						  GFP_KERNEL);
+			if (!slot->base.data) {
+				kfree(slot);
+				ret = -ENOMEM;
+				goto err_free_pool;
+			}
+		}
+
+		list_add_tail(&slot->node, &pool->free_slots);
+		pool->num_slots++;
+	}
+
+	return pool;
+
+err_free_pool:
+	i3c_generic_ibi_free_pool(pool);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_alloc_pool);
+
+/**
+ * i3c_generic_ibi_get_free_slot() - Get a free slot from a generic IBI pool
+ * @pool: the pool to query an IBI slot on
+ *
+ * Search for a free slot in a generic IBI pool.
+ * The slot should be returned to the pool using i3c_generic_ibi_recycle_slot()
+ * when it's no longer needed.
+ *
+ * Return: a pointer to a free slot, or NULL if there's no free slot available.
+ */
+struct i3c_ibi_slot *
+i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool)
+{
+	struct i3c_generic_ibi_slot *slot;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pool->lock, flags);
+	slot = list_first_entry_or_null(&pool->free_slots,
+					struct i3c_generic_ibi_slot, node);
+	if (slot)
+		list_del(&slot->node);
+	spin_unlock_irqrestore(&pool->lock, flags);
+
+	return slot ? &slot->base : NULL;
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_get_free_slot);
+
+/**
+ * i3c_generic_ibi_recycle_slot() - Return a slot to a generic IBI pool
+ * @pool: the pool to return the IBI slot to
+ * @s: IBI slot to recycle
+ *
+ * Add an IBI slot back to its generic IBI pool. Should be called from the
+ * master driver struct_master_controller_ops->recycle_ibi() method.
+ */
+void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
+				  struct i3c_ibi_slot *s)
+{
+	struct i3c_generic_ibi_slot *slot;
+	unsigned long flags;
+
+	if (!s)
+		return;
+
+	slot = container_of(s, struct i3c_generic_ibi_slot, base);
+	spin_lock_irqsave(&pool->lock, flags);
+	list_add_tail(&slot->node, &pool->free_slots);
+	spin_unlock_irqrestore(&pool->lock, flags);
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_recycle_slot);
+
+static void i3c_master_destroy_bus(struct i3c_master_controller *master)
+{
+	i3c_bus_unregister(master->bus);
+}
+
+static int i3c_master_create_bus(struct i3c_master_controller *master)
+{
+	struct i3c_bus *i3cbus;
+	int ret;
+
+	i3cbus = i3c_bus_create(master->parent);
+	if (IS_ERR(i3cbus))
+		return PTR_ERR(i3cbus);
+
+	master->bus = i3cbus;
+
+	if (i3cbus->dev.of_node) {
+		ret = of_populate_i3c_bus(master);
+		if (ret)
+			goto err_destroy_bus;
+	}
+
+	ret = i3c_bus_register(i3cbus);
+	if (ret)
+		goto err_destroy_bus;
+
+	return 0;
+
+err_destroy_bus:
+	i3c_bus_unref(i3cbus);
+
+	return ret;
+}
+
+static int i3c_master_check_ops(const struct i3c_master_controller_ops *ops)
+{
+	if (!ops || !ops->bus_init || !ops->priv_xfers ||
+	    !ops->send_ccc_cmd || !ops->do_daa || !ops->i2c_xfers ||
+	    !ops->i2c_funcs)
+		return -EINVAL;
+
+	if (ops->request_ibi &&
+	    (!ops->enable_ibi || !ops->disable_ibi || !ops->free_ibi ||
+	     !ops->recycle_ibi_slot))
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * i3c_master_register() - register an I3C master
+ * @master: master used to send frames on the bus
+ * @parent: the parent device (the one that provides this I3C master
+ *	    controller)
+ * @ops: the master controller operations
+ * @secondary: true if you are registering a secondary master. Will return
+ *	       -ENOTSUPP if set to true since secondary masters are not yet
+ *	       supported
+ *
+ * This function takes care of everything for you:
+ *
+ * - creates and initializes the I3C bus
+ * - populates the bus with static I2C devs if @parent->of_node is not
+ *   NULL
+ * - registers all I3C devices added by the controller during bus
+ *   initialization
+ * - registers the I2C adapter and all I2C devices
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_register(struct i3c_master_controller *master,
+			struct device *parent,
+			const struct i3c_master_controller_ops *ops,
+			bool secondary)
+{
+	int ret;
+
+	/* We do not support secondary masters yet. */
+	if (secondary)
+		return -ENOTSUPP;
+
+	ret = i3c_master_check_ops(ops);
+	if (ret)
+		return ret;
+
+	master->parent = parent;
+	master->ops = ops;
+	master->secondary = secondary;
+
+	ret = i3c_master_create_bus(master);
+	if (ret)
+		return ret;
+
+	master->wq = alloc_workqueue("%s", 0, 0, dev_name(parent));
+	if (!master->wq) {
+		ret = -ENOMEM;
+		goto err_destroy_bus;
+	}
+
+	ret = i3c_master_bus_init(master);
+	if (ret)
+		goto err_destroy_wq;
+
+	/*
+	 * Expose our I3C bus as an I2C adapter so that I2C devices are exposed
+	 * through the I2C subsystem.
+	 */
+	ret = i3c_master_i2c_adapter_init(master);
+	if (ret)
+		goto err_cleanup_bus;
+
+	/*
+	 * We're done initializing the bus and the controller, we can now
+	 * register I3C devices dicovered during the initial DAA.
+	 */
+	master->init_done = true;
+	i3c_bus_normaluse_lock(master->bus);
+	i3c_master_register_new_i3c_devs(master);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return 0;
+
+err_cleanup_bus:
+	i3c_master_bus_cleanup(master);
+
+err_destroy_wq:
+	destroy_workqueue(master->wq);
+
+err_destroy_bus:
+	i3c_master_destroy_bus(master);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_master_register);
+
+/**
+ * i3c_master_unregister() - unregister an I3C master
+ * @master: master used to send frames on the bus
+ *
+ * Basically undo everything done in i3c_master_register().
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_unregister(struct i3c_master_controller *master)
+{
+	i3c_master_i2c_adapter_cleanup(master);
+	i3c_master_unregister_i3c_devs(master);
+	i3c_master_bus_cleanup(master);
+	destroy_workqueue(master->wq);
+	i3c_master_destroy_bus(master);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_unregister);
diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
new file mode 100644
index 000000000000..e69de29bb2d1
diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
new file mode 100644
index 000000000000..e69de29bb2d1
diff --git a/include/linux/i3c/ccc.h b/include/linux/i3c/ccc.h
new file mode 100644
index 000000000000..4d0712979ade
--- /dev/null
+++ b/include/linux/i3c/ccc.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_CCC_H
+#define I3C_CCC_H
+
+#include <linux/bitops.h>
+
+/* I3C CCC (Common Command Codes) related definitions */
+#define I3C_CCC_DIRECT			BIT(7)
+
+#define I3C_CCC_ID(id, broadcast)	\
+	((id) | ((broadcast) ? 0 : I3C_CCC_DIRECT))
+
+/* Commands valid in both broadcast and unicast modes */
+#define I3C_CCC_ENEC(broadcast)		I3C_CCC_ID(0x0, broadcast)
+#define I3C_CCC_DISEC(broadcast)	I3C_CCC_ID(0x1, broadcast)
+#define I3C_CCC_ENTAS(as, broadcast)	I3C_CCC_ID(0x2 + (as), broadcast)
+#define I3C_CCC_RSTDAA(broadcast)	I3C_CCC_ID(0x6, broadcast)
+#define I3C_CCC_SETMWL(broadcast)	I3C_CCC_ID(0x9, broadcast)
+#define I3C_CCC_SETMRL(broadcast)	I3C_CCC_ID(0xa, broadcast)
+#define I3C_CCC_SETXTIME(broadcast)	((broadcast) ? 0x28 : 0x98)
+#define I3C_CCC_VENDOR(id, broadcast)	((id) + ((broadcast) ? 0x61 : 0xe0))
+
+/* Broadcast-only commands */
+#define I3C_CCC_ENTDAA			I3C_CCC_ID(0x7, true)
+#define I3C_CCC_DEFSLVS			I3C_CCC_ID(0x8, true)
+#define I3C_CCC_ENTTM			I3C_CCC_ID(0xb, true)
+#define I3C_CCC_ENTHDR(x)		I3C_CCC_ID(0x20 + (x), true)
+
+/* Unicast-only commands */
+#define I3C_CCC_SETDASA			I3C_CCC_ID(0x7, false)
+#define I3C_CCC_SETNEWDA		I3C_CCC_ID(0x8, false)
+#define I3C_CCC_GETMWL			I3C_CCC_ID(0xb, false)
+#define I3C_CCC_GETMRL			I3C_CCC_ID(0xc, false)
+#define I3C_CCC_GETPID			I3C_CCC_ID(0xd, false)
+#define I3C_CCC_GETBCR			I3C_CCC_ID(0xe, false)
+#define I3C_CCC_GETDCR			I3C_CCC_ID(0xf, false)
+#define I3C_CCC_GETSTATUS		I3C_CCC_ID(0x10, false)
+#define I3C_CCC_GETACCMST		I3C_CCC_ID(0x11, false)
+#define I3C_CCC_SETBRGTGT		I3C_CCC_ID(0x13, false)
+#define I3C_CCC_GETMXDS			I3C_CCC_ID(0x14, false)
+#define I3C_CCC_GETHDRCAP		I3C_CCC_ID(0x15, false)
+#define I3C_CCC_GETXTIME		I3C_CCC_ID(0x19, false)
+
+#define I3C_CCC_EVENT_SIR		BIT(0)
+#define I3C_CCC_EVENT_MR		BIT(1)
+#define I3C_CCC_EVENT_HJ		BIT(3)
+
+/**
+ * struct i3c_ccc_events - payload passed to ENEC/DISEC CCC
+ *
+ * @events: bitmask of I3C_CCC_EVENT_xxx events.
+ *
+ * Depending on the CCC command, the specific events coming from all devices
+ * (broadcast version) or a specific device (unicast version) will be
+ * enabled (ENEC) or disabled (DISEC).
+ */
+struct i3c_ccc_events {
+	u8 events;
+} __packed;
+
+/**
+ * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
+ *
+ * @len: maximum write length in bytes
+ *
+ * The maximum write length is only applicable to SDR private messages or
+ * extended Write CCCs (like SETXTIME).
+ */
+struct i3c_ccc_mwl {
+	__be16 len;
+} __packed;
+
+/**
+ * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC
+ *
+ * @len: maximum read length in bytes
+ * @ibi_len: maximum IBI payload length
+ *
+ * The maximum read length is only applicable to SDR private messages or
+ * extended Read CCCs (like GETXTIME).
+ * The IBI length is only valid if the I3C slave is IBI capable
+ * (%I3C_BCR_IBI_REQ_CAP is set).
+ */
+struct i3c_ccc_mrl {
+	__be16 read_len;
+	u8 ibi_len;
+} __packed;
+
+/**
+ * struct i3c_ccc_dev_desc - I3C/I2C device descriptor used for DEFSLVS
+ *
+ * @dyn_addr: dynamic address assigned to the I3C slave or 0 if the entry is
+ *	      describing an I2C slave.
+ * @dcr: DCR value (not applicable to entries describing I2C devices)
+ * @lvr: LVR value (not applicable to entries describing I3C devices)
+ * @bcr: BCR value or 0 if this entry is describing an I2C slave
+ * @static_addr: static address or 0 if the device does not have a static
+ *		 address
+ *
+ * The DEFSLVS command should be passed an array of i3c_ccc_dev_desc
+ * descriptors (one entry per I3C/I2C dev controlled by the master).
+ */
+struct i3c_ccc_dev_desc {
+	u8 dyn_addr;
+	union {
+		u8 dcr;
+		u8 lvr;
+	};
+	u8 bcr;
+	u8 static_addr;
+} __packed;
+
+/**
+ * struct i3c_ccc_defslvs - payload passed to DEFSLVS CCC
+ *
+ * @count: number of dev descriptors
+ * @master: descriptor describing the current master
+ * @slaves: array of descriptors describing slaves controlled by the
+ *	    current master
+ *
+ * Information passed to the broadcast DEFSLVS to propagate device
+ * information to all masters currently acting as slaves on the bus.
+ * This is only meaningful if you have more than one master.
+ */
+struct i3c_ccc_defslvs {
+	u8 count;
+	struct i3c_ccc_dev_desc master;
+	struct i3c_ccc_dev_desc slaves[0];
+} __packed;
+
+/**
+ * enum i3c_ccc_test_mode - enum listing all available test modes
+ *
+ * @I3C_CCC_EXIT_TEST_MODE: exit test mode
+ * @I3C_CCC_VENDOR_TEST_MODE: enter vendor test mode
+ */
+enum i3c_ccc_test_mode {
+	I3C_CCC_EXIT_TEST_MODE,
+	I3C_CCC_VENDOR_TEST_MODE,
+};
+
+/**
+ * struct i3c_ccc_enttm - payload passed to ENTTM CCC
+ *
+ * @mode: one of the &enum i3c_ccc_test_mode modes
+ *
+ * Information passed to the ENTTM CCC to instruct an I3C device to enter a
+ * specific test mode.
+ */
+struct i3c_ccc_enttm {
+	u8 mode;
+} __packed;
+
+/**
+ * struct i3c_ccc_setda - payload passed to SETNEWDA and SETDASA CCCs
+ *
+ * @addr: dynamic address to assign to an I3C device
+ *
+ * Information passed to the SETNEWDA and SETDASA CCCs to assign/change the
+ * dynamic address of an I3C device.
+ */
+struct i3c_ccc_setda {
+	u8 addr;
+} __packed;
+
+/**
+ * struct i3c_ccc_getpid - payload passed to GETPID CCC
+ *
+ * @pid: 48 bits PID in big endian
+ */
+struct i3c_ccc_getpid {
+	u8 pid[6];
+} __packed;
+
+/**
+ * struct i3c_ccc_getbcr - payload passed to GETBCR CCC
+ *
+ * @bcr: BCR (Bus Characteristic Register) value
+ */
+struct i3c_ccc_getbcr {
+	u8 bcr;
+} __packed;
+
+/**
+ * struct i3c_ccc_getdcr - payload passed to GETDCR CCC
+ *
+ * @dcr: DCR (Device Characteristic Register) value
+ */
+struct i3c_ccc_getdcr {
+	u8 dcr;
+} __packed;
+
+#define I3C_CCC_STATUS_PENDING_INT(status)	((status) & GENMASK(3, 0))
+#define I3C_CCC_STATUS_PROTOCOL_ERROR		BIT(5)
+#define I3C_CCC_STATUS_ACTIVITY_MODE(status)	\
+	(((status) & GENMASK(7, 6)) >> 6)
+
+/**
+ * struct i3c_ccc_getstatus - payload passed to GETSTATUS CCC
+ *
+ * @status: status of the I3C slave (see I3C_CCC_STATUS_xxx macros for more
+ *	    information).
+ */
+struct i3c_ccc_getstatus {
+	__be16 status;
+} __packed;
+
+/**
+ * struct i3c_ccc_getaccmst - payload passed to GETACCMST CCC
+ *
+ * @newmaster: address of the master taking bus ownership
+ */
+struct i3c_ccc_getaccmst {
+	u8 newmaster;
+} __packed;
+
+/**
+ * struct i3c_ccc_bridged_slave_desc - bridged slave descriptor
+ *
+ * @addr: dynamic address of the bridged device
+ * @id: ID of the slave device behind the bridge
+ */
+struct i3c_ccc_bridged_slave_desc {
+	u8 addr;
+	__be16 id;
+} __packed;
+
+/**
+ * struct i3c_ccc_setbrgtgt - payload passed to SETBRGTGT CCC
+ *
+ * @count: number of bridged slaves
+ * @bslaves: bridged slave descriptors
+ */
+struct i3c_ccc_setbrgtgt {
+	u8 count;
+	struct i3c_ccc_bridged_slave_desc bslaves[0];
+} __packed;
+
+/**
+ * enum i3c_sdr_max_data_rate - max data rate values for private SDR transfers
+ */
+enum i3c_sdr_max_data_rate {
+	I3C_SDR0_FSCL_MAX,
+	I3C_SDR1_FSCL_8MHZ,
+	I3C_SDR2_FSCL_6MHZ,
+	I3C_SDR3_FSCL_4MHZ,
+	I3C_SDR4_FSCL_2MHZ,
+};
+
+/**
+ * enum i3c_tsco - clock to data turn-around
+ */
+enum i3c_tsco {
+	I3C_TSCO_8NS,
+	I3C_TSCO_9NS,
+	I3C_TSCO_10NS,
+	I3C_TSCO_11NS,
+	I3C_TSCO_12NS,
+};
+
+#define I3C_CCC_MAX_SDR_FSCL_MASK	GENMASK(2, 0)
+#define I3C_CCC_MAX_SDR_FSCL(x)		((x) & I3C_CCC_MAX_SDR_FSCL_MASK)
+
+/**
+ * struct i3c_ccc_getmxds - payload passed to GETMXDS CCC
+ *
+ * @maxwr: write limitations
+ * @maxrd: read limitations
+ * @maxrdturn: maximum read turn-around expressed micro-seconds and
+ *	       little-endian formatted
+ */
+struct i3c_ccc_getmxds {
+	u8 maxwr;
+	u8 maxrd;
+	u8 maxrdturn[3];
+} __packed;
+
+#define I3C_CCC_HDR_MODE(mode)		BIT(mode)
+
+/**
+ * struct i3c_ccc_gethdrcap - payload passed to GETHDRCAP CCC
+ *
+ * @modes: bitmap of supported HDR modes
+ */
+struct i3c_ccc_gethdrcap {
+	u8 modes;
+} __packed;
+
+/**
+ * enum i3c_ccc_setxtime_subcmd - SETXTIME sub-commands
+ */
+enum i3c_ccc_setxtime_subcmd {
+	I3C_CCC_SETXTIME_ST = 0x7f,
+	I3C_CCC_SETXTIME_DT = 0xbf,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE0 = 0xdf,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE1 = 0xef,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE2 = 0xf7,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE3 = 0xfb,
+	I3C_CCC_SETXTIME_ASYNC_TRIGGER = 0xfd,
+	I3C_CCC_SETXTIME_TPH = 0x3f,
+	I3C_CCC_SETXTIME_TU = 0x9f,
+	I3C_CCC_SETXTIME_ODR = 0x8f,
+};
+
+/**
+ * struct i3c_ccc_setxtime - payload passed to SETXTIME CCC
+ *
+ * @subcmd: one of the sub-commands ddefined in &enum i3c_ccc_setxtime_subcmd
+ * @data: sub-command payload. Amount of data is determined by
+ *	  &i3c_ccc_setxtime->subcmd
+ */
+struct i3c_ccc_setxtime {
+	u8 subcmd;
+	u8 data[0];
+} __packed;
+
+#define I3C_CCC_GETXTIME_SYNC_MODE	BIT(0)
+#define I3C_CCC_GETXTIME_ASYNC_MODE(x)	BIT((x) + 1)
+#define I3C_CCC_GETXTIME_OVERFLOW	BIT(7)
+
+/**
+ * struct i3c_ccc_getxtime - payload retrieved from GETXTIME CCC
+ *
+ * @supported_modes: bitmap describing supported XTIME modes
+ * @state: current status (enabled mode and overflow status)
+ * @frequency: slave's internal oscillator frequency in 500KHz steps
+ * @inaccuracy: slave's internal oscillator inaccuracy in 0.1% steps
+ */
+struct i3c_ccc_getxtime {
+	u8 supported_modes;
+	u8 state;
+	u8 frequency;
+	u8 inaccuracy;
+} __packed;
+
+/**
+ * struct i3c_ccc_cmd_payload - CCC payload
+ *
+ * @len: payload length
+ * @data: payload data
+ */
+struct i3c_ccc_cmd_payload {
+	u16 len;
+	void *data;
+};
+
+/**
+ * struct i3c_ccc_cmd_dest - CCC command destination
+ *
+ * @addr: can be an I3C device address or the broadcast address if this is a
+ *	  broadcast CCC
+ * @payload: payload to be sent to this device or broadcasted
+ */
+struct i3c_ccc_cmd_dest {
+	u8 addr;
+	struct i3c_ccc_cmd_payload payload;
+};
+
+/**
+ * struct i3c_ccc_cmd - CCC command
+ *
+ * @rnw: true if the CCC should retrieve data from the device. Only valid for
+ *	 unicast commands
+ * @id: CCC command id
+ * @dests: array of destinations and associated payload for this CCC. Most of
+ *	   the time, only one destination is provided
+ * @ndests: number of destinations. Should always be one for broadcast commands
+ */
+struct i3c_ccc_cmd {
+	bool rnw;
+	u8 id;
+	struct i3c_ccc_cmd_dest *dests;
+	int ndests;
+};
+
+#endif /* I3C_CCC_H */
diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
new file mode 100644
index 000000000000..411b13ceda9f
--- /dev/null
+++ b/include/linux/i3c/device.h
@@ -0,0 +1,305 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_DEV_H
+#define I3C_DEV_H
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kconfig.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+
+/**
+ * enum i3c_hdr_mode - HDR mode ids
+ * @I3C_HDR_DDR: DDR mode
+ * @I3C_HDR_TSP: TSP mode
+ * @I3C_HDR_TSL: TSL mode
+ */
+enum i3c_hdr_mode {
+	I3C_HDR_DDR,
+	I3C_HDR_TSP,
+	I3C_HDR_TSL,
+};
+
+/**
+ * struct i3c_priv_xfer - I3C SDR private transfer
+ * @rnw: encodes the transfer direction. true for a read, false for a write
+ * @len: transfer length in bytes of the transfer
+ * @data: input/output buffer
+ */
+struct i3c_priv_xfer {
+	bool rnw;
+	u16 len;
+	union {
+		void *in;
+		const void *out;
+	} data;
+};
+
+/**
+ * enum i3c_dcr - I3C DCR values
+ * @I3C_DCR_GENERIC_DEVICE: generic I3C device
+ */
+enum i3c_dcr {
+	I3C_DCR_GENERIC_DEVICE = 0,
+};
+
+#define I3C_PID_MANUF_ID(pid)		(((pid) & GENMASK_ULL(47, 33)) >> 33)
+#define I3C_PID_RND_LOWER_32BITS(pid)	(!!((pid) & BIT_ULL(32)))
+#define I3C_PID_RND_VAL(pid)		((pid) & GENMASK_ULL(31, 0))
+#define I3C_PID_PART_ID(pid)		(((pid) & GENMASK_ULL(31, 16)) >> 16)
+#define I3C_PID_INSTANCE_ID(pid)	(((pid) & GENMASK_ULL(15, 12)) >> 12)
+#define I3C_PID_EXTRA_INFO(pid)		((pid) & GENMASK_ULL(11, 0))
+
+#define I3C_BCR_DEVICE_ROLE(bcr)	((bcr) & GENMASK(7, 6))
+#define I3C_BCR_I3C_SLAVE		(0 << 6)
+#define I3C_BCR_I3C_MASTER		(1 << 6)
+#define I3C_BCR_HDR_CAP			BIT(5)
+#define I3C_BCR_BRIDGE			BIT(4)
+#define I3C_BCR_OFFLINE_CAP		BIT(3)
+#define I3C_BCR_IBI_PAYLOAD		BIT(2)
+#define I3C_BCR_IBI_REQ_CAP		BIT(1)
+#define I3C_BCR_MAX_DATA_SPEED_LIM	BIT(0)
+
+/**
+ * struct i3c_device_info - I3C device information
+ * @pid: Provisional ID
+ * @bcr: Bus Characteristic Register
+ * @dcr: Device Characteristic Register
+ * @static_addr: static/I2C address
+ * @dyn_addr: dynamic address
+ * @hdr_cap: supported HDR modes
+ * @max_read_ds: max read speed information
+ * @max_write_ds: max write speed information
+ * @max_ibi_len: max IBI payload length
+ * @max_read_turnaround: max read turn-around time in micro-seconds
+ * @max_read_len: max private SDR read length in bytes
+ * @max_write_len: max private SDR write length in bytes
+ *
+ * These are all basic information that should be advertised by an I3C device.
+ * Some of them are optional depending on the device type and device
+ * capabilities.
+ * For each I3C slave attached to a master with
+ * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command
+ * to retrieve these data.
+ */
+struct i3c_device_info {
+	u64 pid;
+	u8 bcr;
+	u8 dcr;
+	u8 static_addr;
+	u8 dyn_addr;
+	u8 hdr_cap;
+	u8 max_read_ds;
+	u8 max_write_ds;
+	u8 max_ibi_len;
+	u32 max_read_turnaround;
+	u16 max_read_len;
+	u16 max_write_len;
+};
+
+/*
+ * I3C device internals are kept hidden from I3C device users. It's just
+ * simpler to refactor things when everything goes through getter/setters, and
+ * I3C device drivers should not have to worry about internal representation
+ * anyway.
+ */
+struct i3c_device;
+
+/* These macros should be used to i3c_device_id entries. */
+#define I3C_MATCH_MANUF_AND_PART (I3C_MATCH_MANUF | I3C_MATCH_PART)
+
+#define I3C_DEVICE(_manufid, _partid, _drvdata)				\
+	{								\
+		.match_flags = I3C_MATCH_MANUF_AND_PART,		\
+		.manuf_id = _manufid,					\
+		.part_id = _partid,					\
+		.data = _drvdata,					\
+	}
+
+#define I3C_DEVICE_EXTRA_INFO(_manufid, _partid, _info, _drvdata)	\
+	{								\
+		.match_flags = I3C_MATCH_MANUF_AND_PART |		\
+			       I3C_MATCH_EXTRA_INFO,			\
+		.manuf_id = _manufid,					\
+		.part_id = _partid,					\
+		.extra_info = _info,					\
+		.data = _drvdata,					\
+	}
+
+#define I3C_CLASS(_dcr, _drvdata)					\
+	{								\
+		.match_flags = I3C_MATCH_DCR,				\
+		.dcr = _dcr,						\
+	}
+
+/**
+ * struct i3c_driver - I3C device driver
+ * @driver: inherit from device_driver
+ * @probe: I3C device probe method
+ * @remove: I3C device remove method
+ * @id_table: I3C device match table. Will be used by the framework to decide
+ *	      which device to bind to this driver
+ */
+struct i3c_driver {
+	struct device_driver driver;
+	int (*probe)(struct i3c_device *dev);
+	int (*remove)(struct i3c_device *dev);
+	const struct i3c_device_id *id_table;
+};
+
+static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv)
+{
+	return container_of(drv, struct i3c_driver, driver);
+}
+
+struct device *i3cdev_to_dev(struct i3c_device *i3cdev);
+struct i3c_device *dev_to_i3cdev(struct device *dev);
+
+static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev,
+				      void *data)
+{
+	struct device *dev = i3cdev_to_dev(i3cdev);
+
+	dev_set_drvdata(dev, data);
+}
+
+static inline void *i3cdev_get_drvdata(struct i3c_device *i3cdev)
+{
+	struct device *dev = i3cdev_to_dev(i3cdev);
+
+	return dev_get_drvdata(dev);
+}
+
+int i3c_driver_register_with_owner(struct i3c_driver *drv,
+				   struct module *owner);
+void i3c_driver_unregister(struct i3c_driver *drv);
+
+#define i3c_driver_register(__drv)		\
+	i3c_driver_register_with_owner(__drv, THIS_MODULE)
+
+/**
+ * module_i3c_driver() - Register a module providing an I3C driver
+ * @__drv: the I3C driver to register
+ *
+ * Provide generic init/exit functions that simply register/unregister an I3C
+ * driver.
+ * Should be used by any driver that does not require extra init/cleanup steps.
+ */
+#define module_i3c_driver(__drv)		\
+	module_driver(__drv, i3c_driver_register, i3c_driver_unregister)
+
+/**
+ * i3c_i2c_driver_register() - Register an i2c and an i3c driver
+ * @i3cdrv: the I3C driver to register
+ * @i2cdrv: the I2C driver to register
+ *
+ * This function registers both @i2cdev and @i3cdev, and fails if one of these
+ * registrations fails. This is mainly useful for devices that support both I2C
+ * and I3C modes.
+ * Note that when CONFIG_I3C is not enabled, this function only registers the
+ * I2C driver.
+ *
+ * Return: 0 if both registrations succeeds, a negative error code otherwise.
+ */
+static inline int i3c_i2c_driver_register(struct i3c_driver *i3cdrv,
+					  struct i2c_driver *i2cdrv)
+{
+	int ret;
+
+	ret = i2c_add_driver(i2cdrv);
+	if (ret || !IS_ENABLED(CONFIG_I3C))
+		return ret;
+
+	ret = i3c_driver_register(i3cdrv);
+	if (ret)
+		i2c_del_driver(i2cdrv);
+
+	return ret;
+}
+
+/**
+ * i3c_i2c_driver_unregister() - Unregister an i2c and an i3c driver
+ * @i3cdrv: the I3C driver to register
+ * @i2cdrv: the I2C driver to register
+ *
+ * This function unregisters both @i3cdrv and @i2cdrv.
+ * Note that when CONFIG_I3C is not enabled, this function only unregisters the
+ * @i2cdrv.
+ */
+static inline void i3c_i2c_driver_unregister(struct i3c_driver *i3cdrv,
+					     struct i2c_driver *i2cdrv)
+{
+	if (IS_ENABLED(CONFIG_I3C))
+		i3c_driver_unregister(i3cdrv);
+
+	i2c_del_driver(i2cdrv);
+}
+
+/**
+ * module_i3c_i2c_driver() - Register a module providing an I3C and an I2C
+ *			     driver
+ * @__i3cdrv: the I3C driver to register
+ * @__i2cdrv: the I3C driver to register
+ *
+ * Provide generic init/exit functions that simply register/unregister an I3C
+ * and an I2C driver.
+ * This macro can be used even if CONFIG_I3C is disabled, in this case, only
+ * the I2C driver will be registered.
+ * Should be used by any driver that does not require extra init/cleanup steps.
+ */
+#define module_i3c_i2c_driver(__i3cdrv, __i2cdrv)	\
+	module_driver(__i3cdrv,				\
+		      i3c_i2c_driver_register,		\
+		      i3c_i2c_driver_unregister)
+
+int i3c_device_do_priv_xfers(struct i3c_device *dev,
+			     struct i3c_priv_xfer *xfers,
+			     int nxfers);
+
+void i3c_device_get_info(struct i3c_device *dev, struct i3c_device_info *info);
+
+struct i3c_ibi_payload {
+	unsigned int len;
+	const void *data;
+};
+
+/**
+ * struct i3c_ibi_setup - IBI setup object
+ * @max_payload_len: maximum length of the payload associated to an IBI. If one
+ *		     IBI appears to have a payload that is bigger than this
+ *		     number, the IBI will be rejected.
+ * @num_slots: number of pre-allocated IBI slots. This should be chosen so that
+ *	       the system never runs out of IBI slots, otherwise you'll lose
+ *	       IBIs.
+ * @handler: IBI handler, every time an IBI is received. This handler is called
+ *	     in a workqueue context. It is allowed to sleep and send new
+ *	     messages on the bus, though it's recommended to keep the
+ *	     processing done there as fast as possible to avoid delaying
+ *	     processing of other queued on the same workqueue.
+ *
+ * Temporary structure used to pass information to i3c_device_request_ibi().
+ * This object can be allocated on the stack since i3c_device_request_ibi()
+ * copies every bit of information and do not use it after
+ * i3c_device_request_ibi() has returned.
+ */
+struct i3c_ibi_setup {
+	unsigned int max_payload_len;
+	unsigned int num_slots;
+	void (*handler)(struct i3c_device *dev,
+			const struct i3c_ibi_payload *payload);
+};
+
+int i3c_device_request_ibi(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *setup);
+void i3c_device_free_ibi(struct i3c_device *dev);
+int i3c_device_enable_ibi(struct i3c_device *dev);
+int i3c_device_disable_ibi(struct i3c_device *dev);
+
+#endif /* I3C_DEV_H */
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
new file mode 100644
index 000000000000..e1a5ce18780f
--- /dev/null
+++ b/include/linux/i3c/master.h
@@ -0,0 +1,587 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_MASTER_H
+#define I3C_MASTER_H
+
+#include <asm/bitsperlong.h>
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/i3c/ccc.h>
+#include <linux/i3c/device.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#define I3C_HOT_JOIN_ADDR		0x2
+#define I3C_BROADCAST_ADDR		0x7e
+#define I3C_MAX_ADDR			GENMASK(6, 0)
+
+struct i3c_master_controller;
+struct i3c_bus;
+
+/**
+ * struct i3c_i2c_dev - I3C/I2C common information
+ * @node: node element used to insert the device into the I2C or I3C device
+ *	  list
+ * @bus: I3C bus this device is connected to
+ * @master: I3C master that instantiated this device. Will be used to send
+ *	    I2C/I3C frames on the bus
+ * @master_priv: master private data assigned to the device. Can be used to
+ *		 add master specific information
+ *
+ * This structure is describing common I3C/I2C dev information.
+ */
+struct i3c_i2c_dev {
+	struct list_head node;
+	struct i3c_bus *bus;
+	struct i3c_master_controller *master;
+	void *master_priv;
+};
+
+#define I3C_LVR_I2C_INDEX_MASK		GENMASK(7, 5)
+#define I3C_LVR_I2C_INDEX(x)		((x) << 5)
+#define I3C_LVR_I2C_FM_MODE		BIT(4)
+
+#define I2C_MAX_ADDR			GENMASK(9, 0)
+
+/**
+ * struct i2c_device - I2C device object
+ * @common: inherit common I3C/I2C description
+ * @info: I2C board info used to instantiate the I2C device. If you are
+ *	  using DT to describe your hardware, this will be filled for you
+ * @client: I2C client object created by the I2C framework. This will only
+ *	    be valid after i3c_master_register() returns
+ * @lvr: Legacy Virtual Register value as described in the I3C specification
+ *
+ * I2C device object. Note that the real I2C device is represented by
+ * i2c_device->client, but we need extra information to handle the device when
+ * it's connected to an I3C bus, hence the &struct i2c_device wrapper.
+ *
+ * The I2C framework is not impacted by this new representation.
+ */
+struct i2c_device {
+	struct i3c_i2c_dev common;
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	u8 lvr;
+};
+
+/**
+ * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot
+ * @work: work associated to this slot. The IBI handler will be called from
+ *	  there
+ * @dev: the I3C device that has generated this IBI
+ * @len: length of the payload associated to this IBI
+ * @data: payload buffer
+ *
+ * An IBI slot is an object pre-allocated by the controller and used when an
+ * IBI comes in.
+ * Every time an IBI comes in, the I3C master driver should find a free IBI
+ * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using
+ * i3c_master_queue_ibi().
+ *
+ * How IBI slots are allocated is left to the I3C master driver, though, for
+ * simple kmalloc-based allocation, the generic IBI slot pool can be used.
+ */
+struct i3c_ibi_slot {
+	struct work_struct work;
+	struct i3c_device *dev;
+	unsigned int len;
+	void *data;
+};
+
+/**
+ * struct i3c_device_ibi_info - IBI information attached to a specific device
+ * @all_ibis_handled: used to be informed when no more IBIs are waiting to be
+ *		      processed. Used by i3c_device_disable_ibi() to wait for
+ *		      all IBIs to be dequeued
+ * @pending_ibis: count the number of pending IBIs. Each pending IBI has its
+ *		  work element queued to the controller workqueue
+ * @max_payload_len: maximum payload length for an IBI coming from this device.
+ *		     this value is specified when calling
+ *		     i3c_device_request_ibi() and should not change at run
+ *		     time. All messages IBIs exceeding this limit should be
+ *		     rejected by the master
+ * @enabled: reflect the IBI status
+ * @handler: IBI handler specified at i3c_device_request_ibi() call time. This
+ *	     handler will be called from the controller workqueue, and as such
+ *	     is allowed to sleep (though it is recommended to process the IBI
+ *	     as fast as possible to not stall processing of other IBIs queued
+ *	     on the same workqueue).
+ *	     New I3C messages can be sent from the IBI handler
+ *
+ * The &struct_i3c_device_ibi_info object is allocated when
+ * i3c_device_request_ibi() is called and attached to a specific device. This
+ * object is here to manage IBIs coming from a specific I3C device.
+ *
+ * Note that this structure is the generic view of the IBI management
+ * infrastructure. I3C master drivers may have their own internal
+ * representation which they can associate to the device using
+ * controller-private data.
+ */
+struct i3c_device_ibi_info {
+	struct completion all_ibis_handled;
+	atomic_t pending_ibis;
+	unsigned int max_payload_len;
+	bool enabled;
+	void (*handler)(struct i3c_device *dev,
+			const struct i3c_ibi_payload *payload);
+};
+
+/**
+ * struct i3c_device - I3C device object
+ * @common: inherit common I3C/I2C description
+ * @dev: device object to register the I3C dev to the device model
+ * @regfailed: true if the device has already been registered to the device
+ *	       model and this operation failed. The goal it to not try
+ *	       register the device everytime a new device is discovered on
+ *	       the bus
+ * @info: I3C device information. Will be automatically filled when you create
+ *	  your device with i3c_master_add_i3c_dev_locked()
+ * @init_dyn_addr: initial dynamic address requested by the FW
+ * @ibi_lock: lock used to protect the &struct_i3c_device->ibi
+ * @ibi: IBI info attached to a device. Should be NULL until
+ *	 i3c_device_request_ibi() is called
+ *
+ * I3C device object. Every I3C devs on the I3C bus are represented, including
+ * I3C masters. For each of them, we have an instance of &struct i3c_device.
+ */
+struct i3c_device {
+	struct i3c_i2c_dev common;
+	struct device dev;
+	bool regfailed;
+	struct i3c_device_info info;
+	u8 init_dyn_addr;
+	struct mutex ibi_lock;
+	struct i3c_device_ibi_info *ibi;
+};
+
+/*
+ * The I3C specification says the maximum number of devices connected on the
+ * bus is 11, but this number depends on external parameters like trace length,
+ * capacitive load per Device, and the types of Devices present on the Bus.
+ * I3C master can also have limitations, so this number is just here as a
+ * reference and should be adjusted on a per-controller/per-board basis.
+ */
+#define I3C_BUS_MAX_DEVS		11
+
+#define I3C_BUS_MAX_I3C_SCL_RATE	12900000
+#define I3C_BUS_TYP_I3C_SCL_RATE	12500000
+#define I3C_BUS_I2C_FM_PLUS_SCL_RATE	1000000
+#define I3C_BUS_I2C_FM_SCL_RATE		400000
+#define I3C_BUS_TLOW_OD_MIN_NS		200
+
+/**
+ * enum i3c_bus_mode - I3C bus mode
+ * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation
+ *		       expected
+ * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on
+ *			     the bus. The only impact in this mode is that the
+ *			     high SCL pulse has to stay below 50ns to trick I2C
+ *			     devices when transmitting I3C frames
+ * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present
+ *			     on the bus
+ */
+enum i3c_bus_mode {
+	I3C_BUS_MODE_PURE,
+	I3C_BUS_MODE_MIXED_FAST,
+	I3C_BUS_MODE_MIXED_SLOW,
+};
+
+/**
+ * enum i3c_addr_slot_status - I3C address slot status
+ * @I3C_ADDR_SLOT_FREE: address is free
+ * @I3C_ADDR_SLOT_RSVD: address is reserved
+ * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device
+ * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device
+ * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask
+ *
+ * On an I3C bus, addresses are assigned dynamically, and we need to know which
+ * addresses are free to use and which ones are already assigned.
+ *
+ * Addresses marked as reserved are those reserved by the I3C protocol
+ * (broadcast address, ...).
+ */
+enum i3c_addr_slot_status {
+	I3C_ADDR_SLOT_FREE,
+	I3C_ADDR_SLOT_RSVD,
+	I3C_ADDR_SLOT_I2C_DEV,
+	I3C_ADDR_SLOT_I3C_DEV,
+	I3C_ADDR_SLOT_STATUS_MASK = 3,
+};
+
+/**
+ * struct i3c_bus - I3C bus object
+ * @dev: device to be registered to the device-model
+ * @cur_master: I3C master currently driving the bus. Since I3C is multi-master
+ *		this can change over the time. Will be used to let a master
+ *		know whether it needs to request bus ownership before sending
+ *		a frame or not
+ * @id: bus ID. Assigned by the framework when register the bus
+ * @addrslots: a bitmap with 2-bits per-slot to encode the address status and
+ *	       ease the DAA (Dynamic Address Assignment) procedure (see
+ *	       &enum i3c_addr_slot_status)
+ * @mode: bus mode (see &enum i3c_bus_mode)
+ * @scl_rate: SCL signal rate for I3C and I2C mode
+ * @devs: 2 lists containing all I3C/I2C devices connected to the bus
+ * @lock: read/write lock on the bus. This is needed to protect against
+ *	  operations that have an impact on the whole bus and the devices
+ *	  connected to it. For example, when asking slaves to drop their
+ *	  dynamic address (RSTDAA CCC), we need to make sure no one is trying
+ *	  to send I3C frames to these devices.
+ *	  Note that this lock does not protect against concurrency between
+ *	  devices: several drivers can send different I3C/I2C frames through
+ *	  the same master in parallel. This is the responsibility of the
+ *	  master to guarantee that frames are actually sent sequentially and
+ *	  not interlaced
+ *
+ * The I3C bus is represented with its own object and not implicitly described
+ * by the I3C master to cope with the multi-master functionality, where one bus
+ * can be shared amongst several masters, each of them requesting bus ownership
+ * when they need to.
+ */
+struct i3c_bus {
+	struct device dev;
+	struct i3c_device *cur_master;
+	int id;
+	unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG];
+	enum i3c_bus_mode mode;
+	struct {
+		unsigned long i3c;
+		unsigned long i2c;
+	} scl_rate;
+	struct {
+		struct list_head i3c;
+		struct list_head i2c;
+	} devs;
+	struct rw_semaphore lock;
+};
+
+struct i3c_master_controller;
+
+/**
+ * struct i3c_master_controller_ops - I3C master methods
+ * @bus_init: hook responsible for the I3C bus initialization. You should at
+ *	      least call master_set_info() from there and set the bus mode.
+ *	      You can also put controller specific initialization in there.
+ *	      This method is mandatory.
+ * @bus_cleanup: cleanup everything done in
+ *		 &i3c_master_controller_ops->bus_init().
+ *		 This method is optional.
+ * @attach_i3c_dev: called every time an I3C device is attached to the bus. It
+ *		    can be after a DAA or when a device is statically declared
+ *		    by the FW, in which case it will only have a static address
+ *		    and the dynamic address will be 0.
+ *		    This is a good place to attach master controller specific
+ *		    data to I3C devices.
+ *		    This method is optional.
+ * @reattach_i3c_dev: called every time an I3C device has its addressed
+ *		      changed. It can be because the device has been powered
+ *		      down and has lost its address, or it can happen when a
+ *		      device had a static address and has been assigned a
+ *		      dynamic address with SETDASA.
+ *		      This method is optional.
+ * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually
+ *		    happens when the master device is unregistered.
+ *		    This method is optional.
+ * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure
+ *	    should send an ENTDAA CCC command and then add all devices
+ *	    discovered sure the DAA using i3c_master_add_i3c_dev_locked().
+ *	    Add devices added with i3c_master_add_i3c_dev_locked() will then be
+ *	    attached or re-attached to the controller.
+ *	    This method is mandatory.
+ * @supports_ccc_cmd: should return true if the CCC command is supported, false
+ *		      otherwise.
+ *		      This method is optional, if not provided the core assumes
+ *		      all CCC commands are supported.
+ * @send_ccc_cmd: send a CCC command
+ *		  This method is mandatory.
+ * @priv_xfers: do one or several private I3C SDR transfers
+ *		This method is mandatory.
+ * @attach_i2c_dev: called every time an I2C device is attached to the bus.
+ *		    This is a good place to attach master controller specific
+ *		    data to I2C devices.
+ *		    This method is optional.
+ * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually
+ *		    happens when the master device is unregistered.
+ *		    This method is optional.
+ * @i2c_xfers: do one or several I2C transfers.
+ *	       This method is mandatory.
+ * @i2c_funcs: expose the supported I2C functionalities.
+ *	       This method is mandatory.
+ * @request_ibi: attach an IBI handler to an I3C device. This implies defining
+ *		 an IBI handler and the constraints of the IBI (maximum payload
+ *		 length and number of pre-allocated slots).
+ *		 Some controllers support less IBI-capable devices than regular
+ *		 devices, so this method might return -%EBUSY if there's no
+ *		 more space for an extra IBI registration
+ *		 This method is optional.
+ * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI
+ *	      should have been disabled with ->disable_irq() prior to that
+ *	      This method is mandatory only if ->request_ibi is not NULL.
+ * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called
+ *		prior to ->enable_ibi(). The controller should first enable
+ *		the IBI on the controller end (for example, unmask the hardware
+ *		IRQ) and then send the ENEC CCC command (with the IBI flag set)
+ *		to the I3C device.
+ *		This method is mandatory only if ->request_ibi is not NULL.
+ * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI
+ *		 flag set and then deactivate the hardware IRQ on the
+ *		 controller end.
+ *		 This method is mandatory only if ->request_ibi is not NULL.
+ * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been
+ *		      processed by its handler. The IBI slot should be put back
+ *		      in the IBI slot pool so that the controller can re-use it
+ *		      for a future IBI
+ *		      This method is mandatory only if ->request_ibi is not
+ *		      NULL.
+ */
+struct i3c_master_controller_ops {
+	int (*bus_init)(struct i3c_master_controller *master);
+	void (*bus_cleanup)(struct i3c_master_controller *master);
+	int (*attach_i3c_dev)(struct i3c_device *dev);
+	void (*reattach_i3c_dev)(struct i3c_device *dev, u8 old_dyn_addr);
+	void (*detach_i3c_dev)(struct i3c_device *dev);
+	int (*do_daa)(struct i3c_master_controller *master);
+	bool (*supports_ccc_cmd)(struct i3c_master_controller *master,
+				 const struct i3c_ccc_cmd *cmd);
+	int (*send_ccc_cmd)(struct i3c_master_controller *master,
+			    struct i3c_ccc_cmd *cmd);
+	int (*priv_xfers)(struct i3c_device *dev,
+			  const struct i3c_priv_xfer *xfers,
+			  int nxfers);
+	int (*attach_i2c_dev)(struct i2c_device *dev);
+	void (*detach_i2c_dev)(struct i2c_device *dev);
+	int (*i2c_xfers)(struct i2c_device *dev,
+			 const struct i2c_msg *xfers, int nxfers);
+	u32 (*i2c_funcs)(struct i3c_master_controller *master);
+	int (*request_ibi)(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req);
+	void (*free_ibi)(struct i3c_device *dev);
+	int (*enable_ibi)(struct i3c_device *dev);
+	int (*disable_ibi)(struct i3c_device *dev);
+	void (*recycle_ibi_slot)(struct i3c_device *dev,
+				 struct i3c_ibi_slot *slot);
+};
+
+/**
+ * struct i3c_master_controller - I3C master controller object
+ * @parent: parent device that instantiated this master
+ * @this: an I3C device object representing this master. This device will be
+ *	  added to the list of I3C devs available on the bus
+ * @i2c: I2C adapter used for backward compatibility. This adapter is
+ *	 registered to the I2C subsystem to be as transparent as possible to
+ *	 existing I2C drivers
+ * @ops: master operations. See &struct i3c_master_controller_ops
+ * @secondary: true if the master is a secondary master
+ * @init_done: true when the bus initialization is done
+ * @bus: I3C bus object created by this master
+ * @wq: workqueue used to execute IBI handlers. Can also be used by master
+ *	drivers if they need to postpone operations that need to take place
+ *	in a thread context. Typical examples are Hot Join processing which
+ *	requires taking the bus lock in maintenance, which in turn, can only
+ *	be done from a sleep-able context
+ *
+ * A &struct i3c_master_controller has to be registered to the I3C subsystem
+ * through i3c_master_register(). None of &struct i3c_master_controller fields
+ * should be set manually, just pass appropriate values to
+ * i3c_master_register().
+ */
+struct i3c_master_controller {
+	struct device *parent;
+	struct i3c_device *this;
+	struct i2c_adapter i2c;
+	const struct i3c_master_controller_ops *ops;
+	bool secondary;
+	bool init_done;
+	struct i3c_bus *bus;
+	struct workqueue_struct *wq;
+};
+
+/**
+ * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus
+ * @bus: the I3C bus
+ * @i2cdev: an I2C device updated to point to the current device at each loop
+ *	    iteration
+ *
+ * Iterate over all I2C devs present on the bus.
+ */
+#define i3c_bus_for_each_i2cdev(bus, i2cdev)				\
+	list_for_each_entry(i2cdev, &(bus)->devs.i2c, common.node)
+
+/**
+ * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus
+ * @bus: the I3C bus
+ * @i3cdev: an I3C device updated to point to the current device at each loop
+ *	    iteration
+ *
+ * Iterate over all I3C devs present on the bus.
+ */
+#define i3c_bus_for_each_i3cdev(bus, i3cdev)				\
+	list_for_each_entry(i3cdev, &(bus)->devs.i3c, common.node)
+
+void i3c_bus_maintenance_lock(struct i3c_bus *bus);
+void i3c_bus_maintenance_unlock(struct i3c_bus *bus);
+void i3c_bus_normaluse_lock(struct i3c_bus *bus);
+void i3c_bus_normaluse_unlock(struct i3c_bus *bus);
+
+int i3c_master_do_i2c_xfers(struct i3c_master_controller *master,
+			    const struct i2c_msg *xfers,
+			    int nxfers);
+
+int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
+			    u8 evts);
+int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
+			   u8 evts);
+int i3c_master_entdaa_locked(struct i3c_master_controller *master);
+int i3c_master_defslvs_locked(struct i3c_master_controller *master);
+
+int i3c_master_get_free_addr(struct i3c_master_controller *master,
+			     u8 start_addr);
+
+int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
+				  u8 addr);
+int i3c_master_do_daa(struct i3c_master_controller *master);
+
+int i3c_master_set_info(struct i3c_master_controller *master,
+			const struct i3c_device_info *info);
+
+int i3c_master_register(struct i3c_master_controller *master,
+			struct device *parent,
+			const struct i3c_master_controller_ops *ops,
+			bool secondary);
+int i3c_master_unregister(struct i3c_master_controller *master);
+
+/**
+ * i3c_device_get_master_data() - get master private data attached to an I3C
+ *				  device
+ * @dev: the I3C dev to attach private data to
+ *
+ * Return: the private data previously attached with
+ *	   i3c_device_set_master_data() or NULL if no data has been attached
+ *	   to the device.
+ */
+static inline void *i3c_device_get_master_data(const struct i3c_device *dev)
+{
+	return dev->common.master_priv;
+}
+
+/**
+ * i3c_device_set_master_data() - attach master private data to an I3C device
+ * @dev: the I3C dev to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i3c_device_get_master_data().
+ *
+ * Attaching private data to a device is usually done just after calling
+ * i3c_master_add_i3c_dev_locked().
+ */
+static inline void i3c_device_set_master_data(struct i3c_device *dev,
+					      void *data)
+{
+	dev->common.master_priv = data;
+}
+
+/**
+ * i2c_device_get_master_data() - get master private data attached to an I2C
+ *				  device
+ * @dev: the I2C dev to attach private data to
+ *
+ * Return: the private data previously attached with
+ *	   i2c_device_set_master_data() or NULL if no data has been attached
+ *	   to the device.
+ */
+static inline void *i2c_device_get_master_data(const struct i2c_device *dev)
+{
+	return dev->common.master_priv;
+}
+
+/**
+ * i2c_device_set_master_data() - attach master private data to an I2C device
+ * @dev: the I2C dev to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i2c_device_get_master_data().
+ *
+ * Attaching private data to a device is usually done during
+ * &master_controller_ops->bus_init(), by iterating over all I2C devices
+ * instantiated by the core (using i3c_bus_for_each_i2cdev()).
+ */
+static inline void i2c_device_set_master_data(struct i2c_device *dev,
+					      void *data)
+{
+	dev->common.master_priv = data;
+}
+
+/**
+ * i3c_device_get_master() - get master used to communicate with a device
+ * @dev: I3C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i3c_device_get_master(struct i3c_device *dev)
+{
+	return dev->common.master;
+}
+
+/**
+ * i2c_device_get_master() - get master used to communicate with a device
+ * @dev: I2C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i2c_device_get_master(struct i2c_device *dev)
+{
+	return dev->common.master;
+}
+
+/**
+ * i3c_master_get_bus() - get the bus attached to a master
+ * @master: master object
+ *
+ * Return: the I3C bus @master is connected to
+ */
+static inline struct i3c_bus *
+i3c_master_get_bus(struct i3c_master_controller *master)
+{
+	return master->bus;
+}
+
+/**
+ * i3c_device_get_bus() - get the bus attached to a device
+ * @dev: an I3C device
+ *
+ * Return: the I3C bus @dev is connected to
+ */
+static inline struct i3c_bus *i3c_device_get_bus(struct i3c_device *dev)
+{
+	return dev->common.bus;
+}
+
+struct i3c_generic_ibi_pool;
+
+struct i3c_generic_ibi_pool *
+i3c_generic_ibi_alloc_pool(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req);
+void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool);
+
+struct i3c_ibi_slot *
+i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool);
+void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
+				  struct i3c_ibi_slot *slot);
+
+void i3c_master_queue_ibi(struct i3c_device *dev, struct i3c_ibi_slot *slot);
+
+struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_device *dev);
+
+#endif /* I3C_MASTER_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48fb2b43c35a..ba4a7a263bf5 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -448,6 +448,23 @@ struct pci_epf_device_id {
 	kernel_ulong_t driver_data;
 };
 
+/* i3c */
+
+#define I3C_MATCH_DCR			0x1
+#define I3C_MATCH_MANUF			0x2
+#define I3C_MATCH_PART			0x4
+#define I3C_MATCH_EXTRA_INFO		0x8
+
+struct i3c_device_id {
+	__u8 match_flags;
+	__u8 dcr;
+	__u16 manuf_id;
+	__u16 part_id;
+	__u16 extra_info;
+
+	const void *data;
+};
+
 /* spi */
 
 #define SPI_NAME_SIZE	32
