| Message ID | 20171009101747.16940-2-jbrunet@baylibre.com |
|---|---|
| State | New |
| Headers | show |
| Series | pinctrl: meson: prepare for new SoC | expand |
On 09/10/2017 12:17, Jerome Brunet wrote: > When meson pinctrl is enabled, all meson platforms pinctrl drivers are > built in the kernel, with a significant amount of data. > > This leads to situation where pinctrl drivers targeting an architecture > are also compiled and shipped on another one (ex: meson8 - ARM - compiled > and shipped on ARM64 builds). This is a waste of memory we can easily > avoid. > > This change makes 4 pinctrl drivers (1 per SoC) out the original single > driver, allowing to compile and ship only the ones required. > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > drivers/pinctrl/Kconfig | 11 +------ > drivers/pinctrl/meson/Kconfig | 36 +++++++++++++++++++++ > drivers/pinctrl/meson/Makefile | 8 +++-- > drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 25 +++++++++++++-- > drivers/pinctrl/meson/pinctrl-meson-gxl.c | 25 +++++++++++++-- > drivers/pinctrl/meson/pinctrl-meson.c | 51 ++---------------------------- > drivers/pinctrl/meson/pinctrl-meson.h | 11 ++----- > drivers/pinctrl/meson/pinctrl-meson8.c | 25 +++++++++++++-- > drivers/pinctrl/meson/pinctrl-meson8b.c | 25 +++++++++++++-- > 9 files changed, 140 insertions(+), 77 deletions(-) > create mode 100644 drivers/pinctrl/meson/Kconfig > > diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig > index 1778cf4f81c7..15b5b3b76ba9 100644 > --- a/drivers/pinctrl/Kconfig > +++ b/drivers/pinctrl/Kconfig > @@ -167,16 +167,6 @@ config PINCTRL_MCP23S08 > This provides a GPIO interface supporting inputs and outputs. > The I2C versions of the chips can be used as interrupt-controller. > > -config PINCTRL_MESON > - bool > - depends on OF > - select PINMUX > - select PINCONF > - select GENERIC_PINCONF > - select GPIOLIB > - select OF_GPIO > - select REGMAP_MMIO > - > config PINCTRL_OXNAS > bool > depends on OF > @@ -368,6 +358,7 @@ source "drivers/pinctrl/uniphier/Kconfig" > source "drivers/pinctrl/vt8500/Kconfig" > source "drivers/pinctrl/mediatek/Kconfig" > source "drivers/pinctrl/zte/Kconfig" > +source "drivers/pinctrl/meson/Kconfig" > > config PINCTRL_XWAY > bool > diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig > new file mode 100644 > index 000000000000..15655bfd39b6 > --- /dev/null > +++ b/drivers/pinctrl/meson/Kconfig > @@ -0,0 +1,36 @@ > +menuconfig PINCTRL_MESON > + bool "Amlogic SoC pinctrl drivers" > + depends on ARCH_MESON || COMPILE_TEST > + depends on OF > + select PINMUX > + select PINCONF > + select GENERIC_PINCONF > + select GPIOLIB > + select OF_GPIO > + select REGMAP_MMIO > + select PINMUX > + select GENERIC_PINCONF > + > +if PINCTRL_MESON > + > +config PINCTRL_MESON8 > + bool "Meson 8 SoC pinctrl driver" > + depends on ARM > + default y > + > +config PINCTRL_MESON8B > + bool "Meson 8b SoC pinctrl driver" > + depends on ARM > + default y > + > +config PINCTRL_MESON_GXBB > + bool "Meson gxbb SoC pinctrl driver" > + depends on ARM64 > + default y > + > +config PINCTRL_MESON_GXL > + bool "Meson gxl SoC pinctrl driver" > + depends on ARM64 > + default y > + > +endif > diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile > index 27c5b5126008..a6ef5ff4e9b1 100644 > --- a/drivers/pinctrl/meson/Makefile > +++ b/drivers/pinctrl/meson/Makefile > @@ -1,3 +1,5 @@ > -obj-y += pinctrl-meson8.o pinctrl-meson8b.o > -obj-y += pinctrl-meson-gxbb.o pinctrl-meson-gxl.o > -obj-y += pinctrl-meson.o > +obj-y += pinctrl-meson.o > +obj-$(CONFIG_PINCTRL_MESON8) += pinctrl-meson8.o > +obj-$(CONFIG_PINCTRL_MESON8B) += pinctrl-meson8b.o > +obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o > +obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o > diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c > index 1881d4a0eca2..a87bdb17414b 100644 > --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c > +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c > @@ -824,7 +824,7 @@ static struct meson_bank meson_gxbb_aobus_banks[] = { > BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), > }; > > -struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { > +static struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { > .name = "periphs-banks", > .pins = meson_gxbb_periphs_pins, > .groups = meson_gxbb_periphs_groups, > @@ -836,7 +836,7 @@ struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { > .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks), > }; > > -struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { > +static struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { > .name = "aobus-banks", > .pins = meson_gxbb_aobus_pins, > .groups = meson_gxbb_aobus_groups, > @@ -847,3 +847,24 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { > .num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions), > .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks), > }; > + > +static const struct of_device_id meson_gxbb_pinctrl_dt_match[] = { > + { > + .compatible = "amlogic,meson-gxbb-periphs-pinctrl", > + .data = &meson_gxbb_periphs_pinctrl_data, > + }, > + { > + .compatible = "amlogic,meson-gxbb-aobus-pinctrl", > + .data = &meson_gxbb_aobus_pinctrl_data, > + }, > + { }, > +}; > + > +static struct platform_driver meson_gxbb_pinctrl_driver = { > + .probe = meson_pinctrl_probe, > + .driver = { > + .name = "meson-gxbb-pinctrl", > + .of_match_table = meson_gxbb_pinctrl_dt_match, > + }, > +}; > +builtin_platform_driver(meson_gxbb_pinctrl_driver); > diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c > index 3a14ecae9f31..088ac94f76b0 100644 > --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c > +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c > @@ -809,7 +809,7 @@ static struct meson_bank meson_gxl_aobus_banks[] = { > BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), > }; > > -struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { > +static struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { > .name = "periphs-banks", > .pins = meson_gxl_periphs_pins, > .groups = meson_gxl_periphs_groups, > @@ -821,7 +821,7 @@ struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { > .num_banks = ARRAY_SIZE(meson_gxl_periphs_banks), > }; > > -struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { > +static struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { > .name = "aobus-banks", > .pins = meson_gxl_aobus_pins, > .groups = meson_gxl_aobus_groups, > @@ -832,3 +832,24 @@ struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { > .num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions), > .num_banks = ARRAY_SIZE(meson_gxl_aobus_banks), > }; > + > +static const struct of_device_id meson_gxl_pinctrl_dt_match[] = { > + { > + .compatible = "amlogic,meson-gxl-periphs-pinctrl", > + .data = &meson_gxl_periphs_pinctrl_data, > + }, > + { > + .compatible = "amlogic,meson-gxl-aobus-pinctrl", > + .data = &meson_gxl_aobus_pinctrl_data, > + }, > + { }, > +}; > + > +static struct platform_driver meson_gxl_pinctrl_driver = { > + .probe = meson_pinctrl_probe, > + .driver = { > + .name = "meson-gxl-pinctrl", > + .of_match_table = meson_gxl_pinctrl_dt_match, > + }, > +}; > +builtin_platform_driver(meson_gxl_pinctrl_driver); > diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c > index 71bccb7acbf8..8fc1f1b45435 100644 > --- a/drivers/pinctrl/meson/pinctrl-meson.c > +++ b/drivers/pinctrl/meson/pinctrl-meson.c > @@ -481,42 +481,6 @@ static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio) > return !!(val & BIT(bit)); > } > > -static const struct of_device_id meson_pinctrl_dt_match[] = { > - { > - .compatible = "amlogic,meson8-cbus-pinctrl", > - .data = &meson8_cbus_pinctrl_data, > - }, > - { > - .compatible = "amlogic,meson8b-cbus-pinctrl", > - .data = &meson8b_cbus_pinctrl_data, > - }, > - { > - .compatible = "amlogic,meson8-aobus-pinctrl", > - .data = &meson8_aobus_pinctrl_data, > - }, > - { > - .compatible = "amlogic,meson8b-aobus-pinctrl", > - .data = &meson8b_aobus_pinctrl_data, > - }, > - { > - .compatible = "amlogic,meson-gxbb-periphs-pinctrl", > - .data = &meson_gxbb_periphs_pinctrl_data, > - }, > - { > - .compatible = "amlogic,meson-gxbb-aobus-pinctrl", > - .data = &meson_gxbb_aobus_pinctrl_data, > - }, > - { > - .compatible = "amlogic,meson-gxl-periphs-pinctrl", > - .data = &meson_gxl_periphs_pinctrl_data, > - }, > - { > - .compatible = "amlogic,meson-gxl-aobus-pinctrl", > - .data = &meson_gxl_aobus_pinctrl_data, > - }, > - { }, > -}; > - > static int meson_gpiolib_register(struct meson_pinctrl *pc) > { > int ret; > @@ -624,7 +588,7 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc, > return 0; > } > > -static int meson_pinctrl_probe(struct platform_device *pdev) > +int meson_pinctrl_probe(struct platform_device *pdev) > { > const struct of_device_id *match; > struct device *dev = &pdev->dev; > @@ -636,10 +600,10 @@ static int meson_pinctrl_probe(struct platform_device *pdev) > return -ENOMEM; > > pc->dev = dev; > - match = of_match_node(meson_pinctrl_dt_match, pdev->dev.of_node); > + match = of_match_node(dev->driver->of_match_table, dev->of_node); Minor comment, maybe you could use of_device_get_match_data(dev) here, it will be simpler. > pc->data = (struct meson_pinctrl_data *) match->data; > > - ret = meson_pinctrl_parse_dt(pc, pdev->dev.of_node); > + ret = meson_pinctrl_parse_dt(pc, dev->of_node); > if (ret) > return ret; > > @@ -659,12 +623,3 @@ static int meson_pinctrl_probe(struct platform_device *pdev) > > return meson_gpiolib_register(pc); > } > - > -static struct platform_driver meson_pinctrl_driver = { > - .probe = meson_pinctrl_probe, > - .driver = { > - .name = "meson-pinctrl", > - .of_match_table = meson_pinctrl_dt_match, > - }, > -}; > -builtin_platform_driver(meson_pinctrl_driver); > diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h > index 7ed0a80fd9dc..284157d43612 100644 > --- a/drivers/pinctrl/meson/pinctrl-meson.h > +++ b/drivers/pinctrl/meson/pinctrl-meson.h > @@ -13,6 +13,7 @@ > > #include <linux/gpio.h> > #include <linux/pinctrl/pinctrl.h> > +#include <linux/platform_device.h> > #include <linux/regmap.h> > #include <linux/types.h> > > @@ -165,11 +166,5 @@ struct meson_pinctrl { > > #define MESON_PIN(x) PINCTRL_PIN(x, #x) > > -extern struct meson_pinctrl_data meson8_cbus_pinctrl_data; > -extern struct meson_pinctrl_data meson8_aobus_pinctrl_data; > -extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data; > -extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data; > -extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data; > -extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data; > -extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data; > -extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data; > +/* Common probe function */ > +int meson_pinctrl_probe(struct platform_device *pdev); > diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c > index fbf8ecd1c2b6..68b345fc105a 100644 > --- a/drivers/pinctrl/meson/pinctrl-meson8.c > +++ b/drivers/pinctrl/meson/pinctrl-meson8.c > @@ -1044,7 +1044,7 @@ static struct meson_bank meson8_aobus_banks[] = { > BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), > }; > > -struct meson_pinctrl_data meson8_cbus_pinctrl_data = { > +static struct meson_pinctrl_data meson8_cbus_pinctrl_data = { > .name = "cbus-banks", > .pins = meson8_cbus_pins, > .groups = meson8_cbus_groups, > @@ -1056,7 +1056,7 @@ struct meson_pinctrl_data meson8_cbus_pinctrl_data = { > .num_banks = ARRAY_SIZE(meson8_cbus_banks), > }; > > -struct meson_pinctrl_data meson8_aobus_pinctrl_data = { > +static struct meson_pinctrl_data meson8_aobus_pinctrl_data = { > .name = "ao-bank", > .pins = meson8_aobus_pins, > .groups = meson8_aobus_groups, > @@ -1067,3 +1067,24 @@ struct meson_pinctrl_data meson8_aobus_pinctrl_data = { > .num_funcs = ARRAY_SIZE(meson8_aobus_functions), > .num_banks = ARRAY_SIZE(meson8_aobus_banks), > }; > + > +static const struct of_device_id meson8_pinctrl_dt_match[] = { > + { > + .compatible = "amlogic,meson8-cbus-pinctrl", > + .data = &meson8_cbus_pinctrl_data, > + }, > + { > + .compatible = "amlogic,meson8-aobus-pinctrl", > + .data = &meson8_aobus_pinctrl_data, > + }, > + { }, > +}; > + > +static struct platform_driver meson8_pinctrl_driver = { > + .probe = meson_pinctrl_probe, > + .driver = { > + .name = "meson8-pinctrl", > + .of_match_table = meson8_pinctrl_dt_match, > + }, > +}; > +builtin_platform_driver(meson8_pinctrl_driver); > diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c > index 7af296db48c8..4d61df09bc3f 100644 > --- a/drivers/pinctrl/meson/pinctrl-meson8b.c > +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c > @@ -904,7 +904,7 @@ static struct meson_bank meson8b_aobus_banks[] = { > BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), > }; > > -struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { > +static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { > .name = "cbus-banks", > .pins = meson8b_cbus_pins, > .groups = meson8b_cbus_groups, > @@ -916,7 +916,7 @@ struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { > .num_banks = ARRAY_SIZE(meson8b_cbus_banks), > }; > > -struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { > +static struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { > .name = "aobus-banks", > .pins = meson8b_aobus_pins, > .groups = meson8b_aobus_groups, > @@ -927,3 +927,24 @@ struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { > .num_funcs = ARRAY_SIZE(meson8b_aobus_functions), > .num_banks = ARRAY_SIZE(meson8b_aobus_banks), > }; > + > +static const struct of_device_id meson8b_pinctrl_dt_match[] = { > + { > + .compatible = "amlogic,meson8b-cbus-pinctrl", > + .data = &meson8b_cbus_pinctrl_data, > + }, > + { > + .compatible = "amlogic,meson8b-aobus-pinctrl", > + .data = &meson8b_aobus_pinctrl_data, > + }, > + { }, > +}; > + > +static struct platform_driver meson8b_pinctrl_driver = { > + .probe = meson_pinctrl_probe, > + .driver = { > + .name = "meson8b-pinctrl", > + .of_match_table = meson8b_pinctrl_dt_match, > + }, > +}; > +builtin_platform_driver(meson8b_pinctrl_driver); > Apart the comment on of_device_get_match_data() : Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2017-10-09 at 13:35 +0200, Neil Armstrong wrote: > On 09/10/2017 12:17, Jerome Brunet wrote: > > When meson pinctrl is enabled, all meson platforms pinctrl drivers are > > built in the kernel, with a significant amount of data. > > > > This leads to situation where pinctrl drivers targeting an architecture > > are also compiled and shipped on another one (ex: meson8 - ARM - compiled > > and shipped on ARM64 builds). This is a waste of memory we can easily > > avoid. > > > > This change makes 4 pinctrl drivers (1 per SoC) out the original single > > driver, allowing to compile and ship only the ones required. > > > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > > --- > > drivers/pinctrl/Kconfig | 11 +------ > > drivers/pinctrl/meson/Kconfig | 36 +++++++++++++++++++++ > > drivers/pinctrl/meson/Makefile | 8 +++-- > > drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 25 +++++++++++++-- > > drivers/pinctrl/meson/pinctrl-meson-gxl.c | 25 +++++++++++++-- > > drivers/pinctrl/meson/pinctrl-meson.c | 51 ++------------------------- > > --- > > drivers/pinctrl/meson/pinctrl-meson.h | 11 ++----- > > drivers/pinctrl/meson/pinctrl-meson8.c | 25 +++++++++++++-- > > drivers/pinctrl/meson/pinctrl-meson8b.c | 25 +++++++++++++-- > > 9 files changed, 140 insertions(+), 77 deletions(-) > > create mode 100644 drivers/pinctrl/meson/Kconfig > > > > diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig > > index 1778cf4f81c7..15b5b3b76ba9 100644 > > --- a/drivers/pinctrl/Kconfig > > +++ b/drivers/pinctrl/Kconfig > > @@ -167,16 +167,6 @@ config PINCTRL_MCP23S08 > > This provides a GPIO interface supporting inputs and outputs. > > The I2C versions of the chips can be used as interrupt- > > controller. > > > > -config PINCTRL_MESON > > - bool > > - depends on OF > > - select PINMUX > > - select PINCONF > > - select GENERIC_PINCONF > > - select GPIOLIB > > - select OF_GPIO > > - select REGMAP_MMIO > > - > > config PINCTRL_OXNAS > > bool > > depends on OF > > @@ -368,6 +358,7 @@ source "drivers/pinctrl/uniphier/Kconfig" > > source "drivers/pinctrl/vt8500/Kconfig" > > source "drivers/pinctrl/mediatek/Kconfig" > > source "drivers/pinctrl/zte/Kconfig" > > +source "drivers/pinctrl/meson/Kconfig" > > > > config PINCTRL_XWAY > > bool > > diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig > > new file mode 100644 > > index 000000000000..15655bfd39b6 > > --- /dev/null > > +++ b/drivers/pinctrl/meson/Kconfig > > @@ -0,0 +1,36 @@ > > +menuconfig PINCTRL_MESON > > + bool "Amlogic SoC pinctrl drivers" > > + depends on ARCH_MESON || COMPILE_TEST > > + depends on OF > > + select PINMUX > > + select PINCONF > > + select GENERIC_PINCONF > > + select GPIOLIB > > + select OF_GPIO > > + select REGMAP_MMIO > > + select PINMUX > > + select GENERIC_PINCONF > > + > > +if PINCTRL_MESON > > + > > +config PINCTRL_MESON8 > > + bool "Meson 8 SoC pinctrl driver" > > + depends on ARM > > + default y > > + > > +config PINCTRL_MESON8B > > + bool "Meson 8b SoC pinctrl driver" > > + depends on ARM > > + default y > > + > > +config PINCTRL_MESON_GXBB > > + bool "Meson gxbb SoC pinctrl driver" > > + depends on ARM64 > > + default y > > + > > +config PINCTRL_MESON_GXL > > + bool "Meson gxl SoC pinctrl driver" > > + depends on ARM64 > > + default y > > + > > +endif > > diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile > > index 27c5b5126008..a6ef5ff4e9b1 100644 > > --- a/drivers/pinctrl/meson/Makefile > > +++ b/drivers/pinctrl/meson/Makefile > > @@ -1,3 +1,5 @@ > > -obj-y += pinctrl-meson8.o pinctrl-meson8b.o > > -obj-y += pinctrl-meson-gxbb.o pinctrl-meson-gxl.o > > -obj-y += pinctrl-meson.o > > +obj-y += pinctrl-meson.o > > +obj-$(CONFIG_PINCTRL_MESON8) += pinctrl-meson8.o > > +obj-$(CONFIG_PINCTRL_MESON8B) += pinctrl-meson8b.o > > +obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o > > +obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o > > diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c > > b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c > > index 1881d4a0eca2..a87bdb17414b 100644 > > --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c > > +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c > > @@ -824,7 +824,7 @@ static struct meson_bank meson_gxbb_aobus_banks[] = { > > BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 0, 0, > > 16, 0, 0, 0, 16, 1, 0), > > }; > > > > -struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { > > +static struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { > > .name = "periphs-banks", > > .pins = meson_gxbb_periphs_pins, > > .groups = meson_gxbb_periphs_groups, > > @@ -836,7 +836,7 @@ struct meson_pinctrl_data > > meson_gxbb_periphs_pinctrl_data = { > > .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks), > > }; > > > > -struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { > > +static struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { > > .name = "aobus-banks", > > .pins = meson_gxbb_aobus_pins, > > .groups = meson_gxbb_aobus_groups, > > @@ -847,3 +847,24 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data > > = { > > .num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions), > > .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks), > > }; > > + > > +static const struct of_device_id meson_gxbb_pinctrl_dt_match[] = { > > + { > > + .compatible = "amlogic,meson-gxbb-periphs-pinctrl", > > + .data = &meson_gxbb_periphs_pinctrl_data, > > + }, > > + { > > + .compatible = "amlogic,meson-gxbb-aobus-pinctrl", > > + .data = &meson_gxbb_aobus_pinctrl_data, > > + }, > > + { }, > > +}; > > + > > +static struct platform_driver meson_gxbb_pinctrl_driver = { > > + .probe = meson_pinctrl_probe, > > + .driver = { > > + .name = "meson-gxbb-pinctrl", > > + .of_match_table = meson_gxbb_pinctrl_dt_match, > > + }, > > +}; > > +builtin_platform_driver(meson_gxbb_pinctrl_driver); > > diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c > > b/drivers/pinctrl/meson/pinctrl-meson-gxl.c > > index 3a14ecae9f31..088ac94f76b0 100644 > > --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c > > +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c > > @@ -809,7 +809,7 @@ static struct meson_bank meson_gxl_aobus_banks[] = { > > BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 0, 0, 16, 0, 0, 0, > > 16, 1, 0), > > }; > > > > -struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { > > +static struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { > > .name = "periphs-banks", > > .pins = meson_gxl_periphs_pins, > > .groups = meson_gxl_periphs_groups, > > @@ -821,7 +821,7 @@ struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data > > = { > > .num_banks = ARRAY_SIZE(meson_gxl_periphs_banks), > > }; > > > > -struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { > > +static struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { > > .name = "aobus-banks", > > .pins = meson_gxl_aobus_pins, > > .groups = meson_gxl_aobus_groups, > > @@ -832,3 +832,24 @@ struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data > > = { > > .num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions), > > .num_banks = ARRAY_SIZE(meson_gxl_aobus_banks), > > }; > > + > > +static const struct of_device_id meson_gxl_pinctrl_dt_match[] = { > > + { > > + .compatible = "amlogic,meson-gxl-periphs-pinctrl", > > + .data = &meson_gxl_periphs_pinctrl_data, > > + }, > > + { > > + .compatible = "amlogic,meson-gxl-aobus-pinctrl", > > + .data = &meson_gxl_aobus_pinctrl_data, > > + }, > > + { }, > > +}; > > + > > +static struct platform_driver meson_gxl_pinctrl_driver = { > > + .probe = meson_pinctrl_probe, > > + .driver = { > > + .name = "meson-gxl-pinctrl", > > + .of_match_table = meson_gxl_pinctrl_dt_match, > > + }, > > +}; > > +builtin_platform_driver(meson_gxl_pinctrl_driver); > > diff --git a/drivers/pinctrl/meson/pinctrl-meson.c > > b/drivers/pinctrl/meson/pinctrl-meson.c > > index 71bccb7acbf8..8fc1f1b45435 100644 > > --- a/drivers/pinctrl/meson/pinctrl-meson.c > > +++ b/drivers/pinctrl/meson/pinctrl-meson.c > > @@ -481,42 +481,6 @@ static int meson_gpio_get(struct gpio_chip *chip, > > unsigned gpio) > > return !!(val & BIT(bit)); > > } > > > > -static const struct of_device_id meson_pinctrl_dt_match[] = { > > - { > > - .compatible = "amlogic,meson8-cbus-pinctrl", > > - .data = &meson8_cbus_pinctrl_data, > > - }, > > - { > > - .compatible = "amlogic,meson8b-cbus-pinctrl", > > - .data = &meson8b_cbus_pinctrl_data, > > - }, > > - { > > - .compatible = "amlogic,meson8-aobus-pinctrl", > > - .data = &meson8_aobus_pinctrl_data, > > - }, > > - { > > - .compatible = "amlogic,meson8b-aobus-pinctrl", > > - .data = &meson8b_aobus_pinctrl_data, > > - }, > > - { > > - .compatible = "amlogic,meson-gxbb-periphs-pinctrl", > > - .data = &meson_gxbb_periphs_pinctrl_data, > > - }, > > - { > > - .compatible = "amlogic,meson-gxbb-aobus-pinctrl", > > - .data = &meson_gxbb_aobus_pinctrl_data, > > - }, > > - { > > - .compatible = "amlogic,meson-gxl-periphs-pinctrl", > > - .data = &meson_gxl_periphs_pinctrl_data, > > - }, > > - { > > - .compatible = "amlogic,meson-gxl-aobus-pinctrl", > > - .data = &meson_gxl_aobus_pinctrl_data, > > - }, > > - { }, > > -}; > > - > > static int meson_gpiolib_register(struct meson_pinctrl *pc) > > { > > int ret; > > @@ -624,7 +588,7 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl > > *pc, > > return 0; > > } > > > > -static int meson_pinctrl_probe(struct platform_device *pdev) > > +int meson_pinctrl_probe(struct platform_device *pdev) > > { > > const struct of_device_id *match; > > struct device *dev = &pdev->dev; > > @@ -636,10 +600,10 @@ static int meson_pinctrl_probe(struct platform_device > > *pdev) > > return -ENOMEM; > > > > pc->dev = dev; > > - match = of_match_node(meson_pinctrl_dt_match, pdev->dev.of_node); > > + match = of_match_node(dev->driver->of_match_table, dev->of_node); > > > Minor comment, maybe you could use of_device_get_match_data(dev) here, it will > be simpler. Indeed, I missed this particular helper. Thx ! > > > pc->data = (struct meson_pinctrl_data *) match->data; > > > > - ret = meson_pinctrl_parse_dt(pc, pdev->dev.of_node); > > + ret = meson_pinctrl_parse_dt(pc, dev->of_node); > > if (ret) > > return ret; > > > > @@ -659,12 +623,3 @@ static int meson_pinctrl_probe(struct platform_device > > *pdev) > > > > return meson_gpiolib_register(pc); > > } > > - > > -static struct platform_driver meson_pinctrl_driver = { > > - .probe = meson_pinctrl_probe, > > - .driver = { > > - .name = "meson-pinctrl", > > - .of_match_table = meson_pinctrl_dt_match, > > - }, > > -}; > > -builtin_platform_driver(meson_pinctrl_driver); > > diff --git a/drivers/pinctrl/meson/pinctrl-meson.h > > b/drivers/pinctrl/meson/pinctrl-meson.h > > index 7ed0a80fd9dc..284157d43612 100644 > > --- a/drivers/pinctrl/meson/pinctrl-meson.h > > +++ b/drivers/pinctrl/meson/pinctrl-meson.h > > @@ -13,6 +13,7 @@ > > > > #include <linux/gpio.h> > > #include <linux/pinctrl/pinctrl.h> > > +#include <linux/platform_device.h> > > #include <linux/regmap.h> > > #include <linux/types.h> > > > > @@ -165,11 +166,5 @@ struct meson_pinctrl { > > > > #define MESON_PIN(x) PINCTRL_PIN(x, #x) > > > > -extern struct meson_pinctrl_data meson8_cbus_pinctrl_data; > > -extern struct meson_pinctrl_data meson8_aobus_pinctrl_data; > > -extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data; > > -extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data; > > -extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data; > > -extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data; > > -extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data; > > -extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data; > > +/* Common probe function */ > > +int meson_pinctrl_probe(struct platform_device *pdev); > > diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c > > b/drivers/pinctrl/meson/pinctrl-meson8.c > > index fbf8ecd1c2b6..68b345fc105a 100644 > > --- a/drivers/pinctrl/meson/pinctrl-meson8.c > > +++ b/drivers/pinctrl/meson/pinctrl-meson8.c > > @@ -1044,7 +1044,7 @@ static struct meson_bank meson8_aobus_banks[] = { > > BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, > > 16, 0, 0, 0, 16, 1, 0), > > }; > > > > -struct meson_pinctrl_data meson8_cbus_pinctrl_data = { > > +static struct meson_pinctrl_data meson8_cbus_pinctrl_data = { > > .name = "cbus-banks", > > .pins = meson8_cbus_pins, > > .groups = meson8_cbus_groups, > > @@ -1056,7 +1056,7 @@ struct meson_pinctrl_data meson8_cbus_pinctrl_data = { > > .num_banks = ARRAY_SIZE(meson8_cbus_banks), > > }; > > > > -struct meson_pinctrl_data meson8_aobus_pinctrl_data = { > > +static struct meson_pinctrl_data meson8_aobus_pinctrl_data = { > > .name = "ao-bank", > > .pins = meson8_aobus_pins, > > .groups = meson8_aobus_groups, > > @@ -1067,3 +1067,24 @@ struct meson_pinctrl_data meson8_aobus_pinctrl_data = > > { > > .num_funcs = ARRAY_SIZE(meson8_aobus_functions), > > .num_banks = ARRAY_SIZE(meson8_aobus_banks), > > }; > > + > > +static const struct of_device_id meson8_pinctrl_dt_match[] = { > > + { > > + .compatible = "amlogic,meson8-cbus-pinctrl", > > + .data = &meson8_cbus_pinctrl_data, > > + }, > > + { > > + .compatible = "amlogic,meson8-aobus-pinctrl", > > + .data = &meson8_aobus_pinctrl_data, > > + }, > > + { }, > > +}; > > + > > +static struct platform_driver meson8_pinctrl_driver = { > > + .probe = meson_pinctrl_probe, > > + .driver = { > > + .name = "meson8-pinctrl", > > + .of_match_table = meson8_pinctrl_dt_match, > > + }, > > +}; > > +builtin_platform_driver(meson8_pinctrl_driver); > > diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c > > b/drivers/pinctrl/meson/pinctrl-meson8b.c > > index 7af296db48c8..4d61df09bc3f 100644 > > --- a/drivers/pinctrl/meson/pinctrl-meson8b.c > > +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c > > @@ -904,7 +904,7 @@ static struct meson_bank meson8b_aobus_banks[] = { > > BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, > > 16, 0, 0, 0, 16, 1, 0), > > }; > > > > -struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { > > +static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { > > .name = "cbus-banks", > > .pins = meson8b_cbus_pins, > > .groups = meson8b_cbus_groups, > > @@ -916,7 +916,7 @@ struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { > > .num_banks = ARRAY_SIZE(meson8b_cbus_banks), > > }; > > > > -struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { > > +static struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { > > .name = "aobus-banks", > > .pins = meson8b_aobus_pins, > > .groups = meson8b_aobus_groups, > > @@ -927,3 +927,24 @@ struct meson_pinctrl_data meson8b_aobus_pinctrl_data = > > { > > .num_funcs = ARRAY_SIZE(meson8b_aobus_functions), > > .num_banks = ARRAY_SIZE(meson8b_aobus_banks), > > }; > > + > > +static const struct of_device_id meson8b_pinctrl_dt_match[] = { > > + { > > + .compatible = "amlogic,meson8b-cbus-pinctrl", > > + .data = &meson8b_cbus_pinctrl_data, > > + }, > > + { > > + .compatible = "amlogic,meson8b-aobus-pinctrl", > > + .data = &meson8b_aobus_pinctrl_data, > > + }, > > + { }, > > +}; > > + > > +static struct platform_driver meson8b_pinctrl_driver = { > > + .probe = meson_pinctrl_probe, > > + .driver = { > > + .name = "meson8b-pinctrl", > > + .of_match_table = meson8b_pinctrl_dt_match, > > + }, > > +}; > > +builtin_platform_driver(meson8b_pinctrl_driver); > > > > Apart the comment on of_device_get_match_data() : > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
hi jerome: On Mon, Oct 9, 2017 at 7:35 PM, Neil Armstrong <narmstrong@baylibre.com> wrote: > On 09/10/2017 12:17, Jerome Brunet wrote: >> When meson pinctrl is enabled, all meson platforms pinctrl drivers are >> built in the kernel, with a significant amount of data. >> >> This leads to situation where pinctrl drivers targeting an architecture >> are also compiled and shipped on another one (ex: meson8 - ARM - compiled >> and shipped on ARM64 builds). This is a waste of memory we can easily >> avoid. >> >> This change makes 4 pinctrl drivers (1 per SoC) out the original single >> driver, allowing to compile and ship only the ones required. >> >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> >> --- >> drivers/pinctrl/Kconfig | 11 +------ >> drivers/pinctrl/meson/Kconfig | 36 +++++++++++++++++++++ >> drivers/pinctrl/meson/Makefile | 8 +++-- >> drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 25 +++++++++++++-- >> drivers/pinctrl/meson/pinctrl-meson-gxl.c | 25 +++++++++++++-- >> drivers/pinctrl/meson/pinctrl-meson.c | 51 ++---------------------------- >> drivers/pinctrl/meson/pinctrl-meson.h | 11 ++----- >> drivers/pinctrl/meson/pinctrl-meson8.c | 25 +++++++++++++-- >> drivers/pinctrl/meson/pinctrl-meson8b.c | 25 +++++++++++++-- >> 9 files changed, 140 insertions(+), 77 deletions(-) >> create mode 100644 drivers/pinctrl/meson/Kconfig >> >> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig >> index 1778cf4f81c7..15b5b3b76ba9 100644 >> --- a/drivers/pinctrl/Kconfig >> +++ b/drivers/pinctrl/Kconfig >> @@ -167,16 +167,6 @@ config PINCTRL_MCP23S08 >> This provides a GPIO interface supporting inputs and outputs. >> The I2C versions of the chips can be used as interrupt-controller. >> >> -config PINCTRL_MESON >> - bool >> - depends on OF >> - select PINMUX >> - select PINCONF >> - select GENERIC_PINCONF >> - select GPIOLIB >> - select OF_GPIO >> - select REGMAP_MMIO >> - >> config PINCTRL_OXNAS >> bool >> depends on OF >> @@ -368,6 +358,7 @@ source "drivers/pinctrl/uniphier/Kconfig" >> source "drivers/pinctrl/vt8500/Kconfig" >> source "drivers/pinctrl/mediatek/Kconfig" >> source "drivers/pinctrl/zte/Kconfig" >> +source "drivers/pinctrl/meson/Kconfig" >> >> config PINCTRL_XWAY >> bool >> diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig >> new file mode 100644 >> index 000000000000..15655bfd39b6 >> --- /dev/null >> +++ b/drivers/pinctrl/meson/Kconfig >> @@ -0,0 +1,36 @@ >> +menuconfig PINCTRL_MESON >> + bool "Amlogic SoC pinctrl drivers" >> + depends on ARCH_MESON || COMPILE_TEST >> + depends on OF >> + select PINMUX >> + select PINCONF >> + select GENERIC_PINCONF >> + select GPIOLIB >> + select OF_GPIO >> + select REGMAP_MMIO >> + select PINMUX >> + select GENERIC_PINCONF >> + >> +if PINCTRL_MESON >> + >> +config PINCTRL_MESON8 >> + bool "Meson 8 SoC pinctrl driver" >> + depends on ARM >> + default y >> + >> +config PINCTRL_MESON8B >> + bool "Meson 8b SoC pinctrl driver" >> + depends on ARM >> + default y >> + >> +config PINCTRL_MESON_GXBB >> + bool "Meson gxbb SoC pinctrl driver" >> + depends on ARM64 >> + default y >> + >> +config PINCTRL_MESON_GXL >> + bool "Meson gxl SoC pinctrl driver" >> + depends on ARM64 >> + default y >> + >> +endif >> diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile >> index 27c5b5126008..a6ef5ff4e9b1 100644 >> --- a/drivers/pinctrl/meson/Makefile >> +++ b/drivers/pinctrl/meson/Makefile >> @@ -1,3 +1,5 @@ >> -obj-y += pinctrl-meson8.o pinctrl-meson8b.o >> -obj-y += pinctrl-meson-gxbb.o pinctrl-meson-gxl.o >> -obj-y += pinctrl-meson.o >> +obj-y += pinctrl-meson.o >> +obj-$(CONFIG_PINCTRL_MESON8) += pinctrl-meson8.o >> +obj-$(CONFIG_PINCTRL_MESON8B) += pinctrl-meson8b.o >> +obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o >> +obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o >> diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c >> index 1881d4a0eca2..a87bdb17414b 100644 >> --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c >> +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c >> @@ -824,7 +824,7 @@ static struct meson_bank meson_gxbb_aobus_banks[] = { >> BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), >> }; >> >> -struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { >> +static struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { >> .name = "periphs-banks", >> .pins = meson_gxbb_periphs_pins, >> .groups = meson_gxbb_periphs_groups, >> @@ -836,7 +836,7 @@ struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { >> .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks), >> }; >> >> -struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { >> +static struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { >> .name = "aobus-banks", >> .pins = meson_gxbb_aobus_pins, >> .groups = meson_gxbb_aobus_groups, >> @@ -847,3 +847,24 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { >> .num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions), >> .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks), >> }; >> + >> +static const struct of_device_id meson_gxbb_pinctrl_dt_match[] = { >> + { >> + .compatible = "amlogic,meson-gxbb-periphs-pinctrl", >> + .data = &meson_gxbb_periphs_pinctrl_data, >> + }, >> + { >> + .compatible = "amlogic,meson-gxbb-aobus-pinctrl", >> + .data = &meson_gxbb_aobus_pinctrl_data, >> + }, >> + { }, >> +}; >> + >> +static struct platform_driver meson_gxbb_pinctrl_driver = { >> + .probe = meson_pinctrl_probe, >> + .driver = { >> + .name = "meson-gxbb-pinctrl", >> + .of_match_table = meson_gxbb_pinctrl_dt_match, >> + }, >> +}; >> +builtin_platform_driver(meson_gxbb_pinctrl_driver); >> diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c >> index 3a14ecae9f31..088ac94f76b0 100644 >> --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c >> +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c >> @@ -809,7 +809,7 @@ static struct meson_bank meson_gxl_aobus_banks[] = { >> BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), >> }; >> >> -struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { >> +static struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { >> .name = "periphs-banks", >> .pins = meson_gxl_periphs_pins, >> .groups = meson_gxl_periphs_groups, >> @@ -821,7 +821,7 @@ struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { >> .num_banks = ARRAY_SIZE(meson_gxl_periphs_banks), >> }; >> >> -struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { >> +static struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { >> .name = "aobus-banks", >> .pins = meson_gxl_aobus_pins, >> .groups = meson_gxl_aobus_groups, >> @@ -832,3 +832,24 @@ struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { >> .num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions), >> .num_banks = ARRAY_SIZE(meson_gxl_aobus_banks), >> }; >> + >> +static const struct of_device_id meson_gxl_pinctrl_dt_match[] = { >> + { >> + .compatible = "amlogic,meson-gxl-periphs-pinctrl", >> + .data = &meson_gxl_periphs_pinctrl_data, >> + }, >> + { >> + .compatible = "amlogic,meson-gxl-aobus-pinctrl", >> + .data = &meson_gxl_aobus_pinctrl_data, >> + }, >> + { }, >> +}; >> + >> +static struct platform_driver meson_gxl_pinctrl_driver = { >> + .probe = meson_pinctrl_probe, >> + .driver = { >> + .name = "meson-gxl-pinctrl", >> + .of_match_table = meson_gxl_pinctrl_dt_match, >> + }, >> +}; >> +builtin_platform_driver(meson_gxl_pinctrl_driver); >> diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c >> index 71bccb7acbf8..8fc1f1b45435 100644 >> --- a/drivers/pinctrl/meson/pinctrl-meson.c >> +++ b/drivers/pinctrl/meson/pinctrl-meson.c >> @@ -481,42 +481,6 @@ static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio) >> return !!(val & BIT(bit)); >> } >> >> -static const struct of_device_id meson_pinctrl_dt_match[] = { >> - { >> - .compatible = "amlogic,meson8-cbus-pinctrl", >> - .data = &meson8_cbus_pinctrl_data, >> - }, >> - { >> - .compatible = "amlogic,meson8b-cbus-pinctrl", >> - .data = &meson8b_cbus_pinctrl_data, >> - }, >> - { >> - .compatible = "amlogic,meson8-aobus-pinctrl", >> - .data = &meson8_aobus_pinctrl_data, >> - }, >> - { >> - .compatible = "amlogic,meson8b-aobus-pinctrl", >> - .data = &meson8b_aobus_pinctrl_data, >> - }, >> - { >> - .compatible = "amlogic,meson-gxbb-periphs-pinctrl", >> - .data = &meson_gxbb_periphs_pinctrl_data, >> - }, >> - { >> - .compatible = "amlogic,meson-gxbb-aobus-pinctrl", >> - .data = &meson_gxbb_aobus_pinctrl_data, >> - }, >> - { >> - .compatible = "amlogic,meson-gxl-periphs-pinctrl", >> - .data = &meson_gxl_periphs_pinctrl_data, >> - }, >> - { >> - .compatible = "amlogic,meson-gxl-aobus-pinctrl", >> - .data = &meson_gxl_aobus_pinctrl_data, >> - }, >> - { }, >> -}; >> - >> static int meson_gpiolib_register(struct meson_pinctrl *pc) >> { >> int ret; >> @@ -624,7 +588,7 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc, >> return 0; >> } >> >> -static int meson_pinctrl_probe(struct platform_device *pdev) >> +int meson_pinctrl_probe(struct platform_device *pdev) >> { >> const struct of_device_id *match; >> struct device *dev = &pdev->dev; >> @@ -636,10 +600,10 @@ static int meson_pinctrl_probe(struct platform_device *pdev) >> return -ENOMEM; >> >> pc->dev = dev; >> - match = of_match_node(meson_pinctrl_dt_match, pdev->dev.of_node); >> + match = of_match_node(dev->driver->of_match_table, dev->of_node); > > > Minor comment, maybe you could use of_device_get_match_data(dev) here, it will be simpler. > with the of_device_get_match_data() been used, I've got this error, probably you should add "#include <linux/of_device.h>" ? AR drivers/base/built-in.o drivers/pinctrl/meson/pinctrl-meson.c: In function ‘meson_pinctrl_probe’: drivers/pinctrl/meson/pinctrl-meson.c:520:43: error: implicit declaration of function ‘of_device_get_match_data’ [-Werror=implicit-function-declaration] pc->data = (struct meson_pinctrl_data *) of_device_get_match_data(dev); ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/meson/pinctrl-meson.c:520:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] pc->data = (struct meson_pinctrl_data *) of_device_get_match_data(dev); ^ >> pc->data = (struct meson_pinctrl_data *) match->data; >> >> - ret = meson_pinctrl_parse_dt(pc, pdev->dev.of_node); >> + ret = meson_pinctrl_parse_dt(pc, dev->of_node); >> if (ret) >> return ret; >> >> @@ -659,12 +623,3 @@ static int meson_pinctrl_probe(struct platform_device *pdev) >> >> return meson_gpiolib_register(pc); >> } >> - >> -static struct platform_driver meson_pinctrl_driver = { >> - .probe = meson_pinctrl_probe, >> - .driver = { >> - .name = "meson-pinctrl", >> - .of_match_table = meson_pinctrl_dt_match, >> - }, >> -}; >> -builtin_platform_driver(meson_pinctrl_driver); >> diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h >> index 7ed0a80fd9dc..284157d43612 100644 >> --- a/drivers/pinctrl/meson/pinctrl-meson.h >> +++ b/drivers/pinctrl/meson/pinctrl-meson.h >> @@ -13,6 +13,7 @@ >> >> #include <linux/gpio.h> >> #include <linux/pinctrl/pinctrl.h> >> +#include <linux/platform_device.h> >> #include <linux/regmap.h> >> #include <linux/types.h> >> >> @@ -165,11 +166,5 @@ struct meson_pinctrl { >> >> #define MESON_PIN(x) PINCTRL_PIN(x, #x) >> >> -extern struct meson_pinctrl_data meson8_cbus_pinctrl_data; >> -extern struct meson_pinctrl_data meson8_aobus_pinctrl_data; >> -extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data; >> -extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data; >> -extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data; >> -extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data; >> -extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data; >> -extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data; >> +/* Common probe function */ >> +int meson_pinctrl_probe(struct platform_device *pdev); >> diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c >> index fbf8ecd1c2b6..68b345fc105a 100644 >> --- a/drivers/pinctrl/meson/pinctrl-meson8.c >> +++ b/drivers/pinctrl/meson/pinctrl-meson8.c >> @@ -1044,7 +1044,7 @@ static struct meson_bank meson8_aobus_banks[] = { >> BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), >> }; >> >> -struct meson_pinctrl_data meson8_cbus_pinctrl_data = { >> +static struct meson_pinctrl_data meson8_cbus_pinctrl_data = { >> .name = "cbus-banks", >> .pins = meson8_cbus_pins, >> .groups = meson8_cbus_groups, >> @@ -1056,7 +1056,7 @@ struct meson_pinctrl_data meson8_cbus_pinctrl_data = { >> .num_banks = ARRAY_SIZE(meson8_cbus_banks), >> }; >> >> -struct meson_pinctrl_data meson8_aobus_pinctrl_data = { >> +static struct meson_pinctrl_data meson8_aobus_pinctrl_data = { >> .name = "ao-bank", >> .pins = meson8_aobus_pins, >> .groups = meson8_aobus_groups, >> @@ -1067,3 +1067,24 @@ struct meson_pinctrl_data meson8_aobus_pinctrl_data = { >> .num_funcs = ARRAY_SIZE(meson8_aobus_functions), >> .num_banks = ARRAY_SIZE(meson8_aobus_banks), >> }; >> + >> +static const struct of_device_id meson8_pinctrl_dt_match[] = { >> + { >> + .compatible = "amlogic,meson8-cbus-pinctrl", >> + .data = &meson8_cbus_pinctrl_data, >> + }, >> + { >> + .compatible = "amlogic,meson8-aobus-pinctrl", >> + .data = &meson8_aobus_pinctrl_data, >> + }, >> + { }, >> +}; >> + >> +static struct platform_driver meson8_pinctrl_driver = { >> + .probe = meson_pinctrl_probe, >> + .driver = { >> + .name = "meson8-pinctrl", >> + .of_match_table = meson8_pinctrl_dt_match, >> + }, >> +}; >> +builtin_platform_driver(meson8_pinctrl_driver); >> diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c >> index 7af296db48c8..4d61df09bc3f 100644 >> --- a/drivers/pinctrl/meson/pinctrl-meson8b.c >> +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c >> @@ -904,7 +904,7 @@ static struct meson_bank meson8b_aobus_banks[] = { >> BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), >> }; >> >> -struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { >> +static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { >> .name = "cbus-banks", >> .pins = meson8b_cbus_pins, >> .groups = meson8b_cbus_groups, >> @@ -916,7 +916,7 @@ struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { >> .num_banks = ARRAY_SIZE(meson8b_cbus_banks), >> }; >> >> -struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { >> +static struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { >> .name = "aobus-banks", >> .pins = meson8b_aobus_pins, >> .groups = meson8b_aobus_groups, >> @@ -927,3 +927,24 @@ struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { >> .num_funcs = ARRAY_SIZE(meson8b_aobus_functions), >> .num_banks = ARRAY_SIZE(meson8b_aobus_banks), >> }; >> + >> +static const struct of_device_id meson8b_pinctrl_dt_match[] = { >> + { >> + .compatible = "amlogic,meson8b-cbus-pinctrl", >> + .data = &meson8b_cbus_pinctrl_data, >> + }, >> + { >> + .compatible = "amlogic,meson8b-aobus-pinctrl", >> + .data = &meson8b_aobus_pinctrl_data, >> + }, >> + { }, >> +}; >> + >> +static struct platform_driver meson8b_pinctrl_driver = { >> + .probe = meson_pinctrl_probe, >> + .driver = { >> + .name = "meson8b-pinctrl", >> + .of_match_table = meson8b_pinctrl_dt_match, >> + }, >> +}; >> +builtin_platform_driver(meson8b_pinctrl_driver); >> > > Apart the comment on of_device_get_match_data() : > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> > > _______________________________________________ > linux-amlogic mailing list > linux-amlogic@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-amlogic -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jerome,
[auto build test ERROR on pinctrl/devel]
[also build test ERROR on v4.14-rc4 next-20171009]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Jerome-Brunet/pinctrl-meson-prepare-for-new-SoC/20171012-094645
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
config: i386-allmodconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All error/warnings (new ones prefixed by >>):
In file included from arch/x86/include/asm/bitops.h:513:0,
from include/linux/bitops.h:37,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from drivers/pinctrl/meson/pinctrl-meson.c:47:
>> arch/x86/include/asm/arch_hweight.h:17:17: error: expected identifier before string constant
#define REG_OUT "a"
^
>> drivers/pinctrl/meson/pinctrl-meson.h:74:2: note: in expansion of macro 'REG_OUT'
REG_OUT,
^~~~~~~
In file included from drivers/pinctrl/meson/pinctrl-meson.c:63:0:
>> drivers/pinctrl/meson/pinctrl-meson.h:99:29: error: 'NUM_REG' undeclared here (not in a function)
struct meson_reg_desc regs[NUM_REG];
^~~~~~~
In file included from arch/x86/include/asm/bitops.h:513:0,
from include/linux/bitops.h:37,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from drivers/pinctrl/meson/pinctrl-meson.c:47:
drivers/pinctrl/meson/pinctrl-meson.c: In function 'meson_gpio_direction_output':
>> arch/x86/include/asm/arch_hweight.h:17:17: error: incompatible type for argument 3 of 'meson_calc_reg_and_bit'
#define REG_OUT "a"
^
>> drivers/pinctrl/meson/pinctrl-meson.c:446:37: note: in expansion of macro 'REG_OUT'
meson_calc_reg_and_bit(bank, gpio, REG_OUT, ®, &bit);
^~~~~~~
drivers/pinctrl/meson/pinctrl-meson.c:99:13: note: expected 'enum meson_reg_type' but argument is of type 'char *'
static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
^~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/bitops.h:513:0,
from include/linux/bitops.h:37,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from drivers/pinctrl/meson/pinctrl-meson.c:47:
drivers/pinctrl/meson/pinctrl-meson.c: In function 'meson_gpio_set':
>> arch/x86/include/asm/arch_hweight.h:17:17: error: incompatible type for argument 3 of 'meson_calc_reg_and_bit'
#define REG_OUT "a"
^
drivers/pinctrl/meson/pinctrl-meson.c:462:37: note: in expansion of macro 'REG_OUT'
meson_calc_reg_and_bit(bank, gpio, REG_OUT, ®, &bit);
^~~~~~~
drivers/pinctrl/meson/pinctrl-meson.c:99:13: note: expected 'enum meson_reg_type' but argument is of type 'char *'
static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
^~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/bitops.h:513:0,
from include/linux/bitops.h:37,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from drivers/pinctrl/meson/pinctrl-meson.c:47:
drivers/pinctrl/meson/pinctrl-meson.c: In function 'meson_gpio_get':
arch/x86/include/asm/arch_hweight.h:16:16: error: incompatible type for argument 3 of 'meson_calc_reg_and_bit'
#define REG_IN "a"
^
>> drivers/pinctrl/meson/pinctrl-meson.c:478:37: note: in expansion of macro 'REG_IN'
meson_calc_reg_and_bit(bank, gpio, REG_IN, ®, &bit);
^~~~~~
drivers/pinctrl/meson/pinctrl-meson.c:99:13: note: expected 'enum meson_reg_type' but argument is of type 'char *'
static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
^~~~~~~~~~~~~~~~~~~~~~
vim +/NUM_REG +99 drivers/pinctrl/meson/pinctrl-meson.h
6ac73095 Beniamino Galvani 2015-01-17 66
6ac73095 Beniamino Galvani 2015-01-17 67 /**
6ac73095 Beniamino Galvani 2015-01-17 68 * enum meson_reg_type - type of registers encoded in @meson_reg_desc
6ac73095 Beniamino Galvani 2015-01-17 69 */
6ac73095 Beniamino Galvani 2015-01-17 70 enum meson_reg_type {
6ac73095 Beniamino Galvani 2015-01-17 71 REG_PULLEN,
6ac73095 Beniamino Galvani 2015-01-17 72 REG_PULL,
6ac73095 Beniamino Galvani 2015-01-17 73 REG_DIR,
6ac73095 Beniamino Galvani 2015-01-17 @74 REG_OUT,
6ac73095 Beniamino Galvani 2015-01-17 75 REG_IN,
6ac73095 Beniamino Galvani 2015-01-17 76 NUM_REG,
6ac73095 Beniamino Galvani 2015-01-17 77 };
6ac73095 Beniamino Galvani 2015-01-17 78
6ac73095 Beniamino Galvani 2015-01-17 79 /**
6ac73095 Beniamino Galvani 2015-01-17 80 * struct meson bank
6ac73095 Beniamino Galvani 2015-01-17 81 *
6ac73095 Beniamino Galvani 2015-01-17 82 * @name: bank name
6ac73095 Beniamino Galvani 2015-01-17 83 * @first: first pin of the bank
6ac73095 Beniamino Galvani 2015-01-17 84 * @last: last pin of the bank
6c9dc843 Jerome Brunet 2017-06-08 85 * @irq: hwirq base number of the bank
6ac73095 Beniamino Galvani 2015-01-17 86 * @regs: array of register descriptors
6ac73095 Beniamino Galvani 2015-01-17 87 *
6ac73095 Beniamino Galvani 2015-01-17 88 * A bank represents a set of pins controlled by a contiguous set of
6ac73095 Beniamino Galvani 2015-01-17 89 * bits in the domain registers. The structure specifies which bits in
6ac73095 Beniamino Galvani 2015-01-17 90 * the regmap control the different functionalities. Each member of
6ac73095 Beniamino Galvani 2015-01-17 91 * the @regs array refers to the first pin of the bank.
6ac73095 Beniamino Galvani 2015-01-17 92 */
6ac73095 Beniamino Galvani 2015-01-17 93 struct meson_bank {
6ac73095 Beniamino Galvani 2015-01-17 94 const char *name;
6ac73095 Beniamino Galvani 2015-01-17 95 unsigned int first;
6ac73095 Beniamino Galvani 2015-01-17 96 unsigned int last;
6c9dc843 Jerome Brunet 2017-06-08 97 int irq_first;
6c9dc843 Jerome Brunet 2017-06-08 98 int irq_last;
6ac73095 Beniamino Galvani 2015-01-17 @99 struct meson_reg_desc regs[NUM_REG];
6ac73095 Beniamino Galvani 2015-01-17 100 };
6ac73095 Beniamino Galvani 2015-01-17 101
:::::: The code at line 99 was first introduced by commit
:::::: 6ac730951104a437bf828683bcf9ba66336c4fa7 pinctrl: add driver for Amlogic Meson SoCs
:::::: TO: Beniamino Galvani <b.galvani@gmail.com>
:::::: CC: Linus Walleij <linus.walleij@linaro.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Hi Jerome,
[auto build test ERROR on pinctrl/devel]
[also build test ERROR on v4.14-rc4 next-20171009]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Jerome-Brunet/pinctrl-meson-prepare-for-new-SoC/20171012-094645
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
config: i386-allyesconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
In file included from drivers/pinctrl/meson/pinctrl-meson.c:63:0:
>> drivers/pinctrl/meson/pinctrl-meson.h:74:2: error: expected identifier before string constant
REG_OUT,
^~~
In file included from drivers/pinctrl/meson/pinctrl-meson.c:63:0:
drivers/pinctrl/meson/pinctrl-meson.h:99:29: error: 'NUM_REG' undeclared here (not in a function)
struct meson_reg_desc regs[NUM_REG];
^~~~~~~
drivers/pinctrl/meson/pinctrl-meson.c: In function 'meson_gpio_direction_output':
>> drivers/pinctrl/meson/pinctrl-meson.c:446:37: error: incompatible type for argument 3 of 'meson_calc_reg_and_bit'
meson_calc_reg_and_bit(bank, gpio, REG_OUT, ®, &bit);
^~~
drivers/pinctrl/meson/pinctrl-meson.c:99:13: note: expected 'enum meson_reg_type' but argument is of type 'char *'
static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
^~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/meson/pinctrl-meson.c: In function 'meson_gpio_set':
drivers/pinctrl/meson/pinctrl-meson.c:462:37: error: incompatible type for argument 3 of 'meson_calc_reg_and_bit'
meson_calc_reg_and_bit(bank, gpio, REG_OUT, ®, &bit);
^~~
drivers/pinctrl/meson/pinctrl-meson.c:99:13: note: expected 'enum meson_reg_type' but argument is of type 'char *'
static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
^~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/meson/pinctrl-meson.c: In function 'meson_gpio_get':
drivers/pinctrl/meson/pinctrl-meson.c:478:37: error: incompatible type for argument 3 of 'meson_calc_reg_and_bit'
meson_calc_reg_and_bit(bank, gpio, REG_IN, ®, &bit);
^~~
drivers/pinctrl/meson/pinctrl-meson.c:99:13: note: expected 'enum meson_reg_type' but argument is of type 'char *'
static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
^~~~~~~~~~~~~~~~~~~~~~
vim +74 drivers/pinctrl/meson/pinctrl-meson.h
6ac73095 Beniamino Galvani 2015-01-17 66
6ac73095 Beniamino Galvani 2015-01-17 67 /**
6ac73095 Beniamino Galvani 2015-01-17 68 * enum meson_reg_type - type of registers encoded in @meson_reg_desc
6ac73095 Beniamino Galvani 2015-01-17 69 */
6ac73095 Beniamino Galvani 2015-01-17 70 enum meson_reg_type {
6ac73095 Beniamino Galvani 2015-01-17 71 REG_PULLEN,
6ac73095 Beniamino Galvani 2015-01-17 72 REG_PULL,
6ac73095 Beniamino Galvani 2015-01-17 73 REG_DIR,
6ac73095 Beniamino Galvani 2015-01-17 @74 REG_OUT,
6ac73095 Beniamino Galvani 2015-01-17 75 REG_IN,
6ac73095 Beniamino Galvani 2015-01-17 76 NUM_REG,
6ac73095 Beniamino Galvani 2015-01-17 77 };
6ac73095 Beniamino Galvani 2015-01-17 78
:::::: The code at line 74 was first introduced by commit
:::::: 6ac730951104a437bf828683bcf9ba66336c4fa7 pinctrl: add driver for Amlogic Meson SoCs
:::::: TO: Beniamino Galvani <b.galvani@gmail.com>
:::::: CC: Linus Walleij <linus.walleij@linaro.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 1778cf4f81c7..15b5b3b76ba9 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -167,16 +167,6 @@ config PINCTRL_MCP23S08 This provides a GPIO interface supporting inputs and outputs. The I2C versions of the chips can be used as interrupt-controller. -config PINCTRL_MESON - bool - depends on OF - select PINMUX - select PINCONF - select GENERIC_PINCONF - select GPIOLIB - select OF_GPIO - select REGMAP_MMIO - config PINCTRL_OXNAS bool depends on OF @@ -368,6 +358,7 @@ source "drivers/pinctrl/uniphier/Kconfig" source "drivers/pinctrl/vt8500/Kconfig" source "drivers/pinctrl/mediatek/Kconfig" source "drivers/pinctrl/zte/Kconfig" +source "drivers/pinctrl/meson/Kconfig" config PINCTRL_XWAY bool diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig new file mode 100644 index 000000000000..15655bfd39b6 --- /dev/null +++ b/drivers/pinctrl/meson/Kconfig @@ -0,0 +1,36 @@ +menuconfig PINCTRL_MESON + bool "Amlogic SoC pinctrl drivers" + depends on ARCH_MESON || COMPILE_TEST + depends on OF + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO + select REGMAP_MMIO + select PINMUX + select GENERIC_PINCONF + +if PINCTRL_MESON + +config PINCTRL_MESON8 + bool "Meson 8 SoC pinctrl driver" + depends on ARM + default y + +config PINCTRL_MESON8B + bool "Meson 8b SoC pinctrl driver" + depends on ARM + default y + +config PINCTRL_MESON_GXBB + bool "Meson gxbb SoC pinctrl driver" + depends on ARM64 + default y + +config PINCTRL_MESON_GXL + bool "Meson gxl SoC pinctrl driver" + depends on ARM64 + default y + +endif diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile index 27c5b5126008..a6ef5ff4e9b1 100644 --- a/drivers/pinctrl/meson/Makefile +++ b/drivers/pinctrl/meson/Makefile @@ -1,3 +1,5 @@ -obj-y += pinctrl-meson8.o pinctrl-meson8b.o -obj-y += pinctrl-meson-gxbb.o pinctrl-meson-gxl.o -obj-y += pinctrl-meson.o +obj-y += pinctrl-meson.o +obj-$(CONFIG_PINCTRL_MESON8) += pinctrl-meson8.o +obj-$(CONFIG_PINCTRL_MESON8B) += pinctrl-meson8b.o +obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o +obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index 1881d4a0eca2..a87bdb17414b 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -824,7 +824,7 @@ static struct meson_bank meson_gxbb_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { +static struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { .name = "periphs-banks", .pins = meson_gxbb_periphs_pins, .groups = meson_gxbb_periphs_groups, @@ -836,7 +836,7 @@ struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks), }; -struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { .name = "aobus-banks", .pins = meson_gxbb_aobus_pins, .groups = meson_gxbb_aobus_groups, @@ -847,3 +847,24 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions), .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks), }; + +static const struct of_device_id meson_gxbb_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson-gxbb-periphs-pinctrl", + .data = &meson_gxbb_periphs_pinctrl_data, + }, + { + .compatible = "amlogic,meson-gxbb-aobus-pinctrl", + .data = &meson_gxbb_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson_gxbb_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson-gxbb-pinctrl", + .of_match_table = meson_gxbb_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson_gxbb_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c index 3a14ecae9f31..088ac94f76b0 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c @@ -809,7 +809,7 @@ static struct meson_bank meson_gxl_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { +static struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { .name = "periphs-banks", .pins = meson_gxl_periphs_pins, .groups = meson_gxl_periphs_groups, @@ -821,7 +821,7 @@ struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { .num_banks = ARRAY_SIZE(meson_gxl_periphs_banks), }; -struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { .name = "aobus-banks", .pins = meson_gxl_aobus_pins, .groups = meson_gxl_aobus_groups, @@ -832,3 +832,24 @@ struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions), .num_banks = ARRAY_SIZE(meson_gxl_aobus_banks), }; + +static const struct of_device_id meson_gxl_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson-gxl-periphs-pinctrl", + .data = &meson_gxl_periphs_pinctrl_data, + }, + { + .compatible = "amlogic,meson-gxl-aobus-pinctrl", + .data = &meson_gxl_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson_gxl_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson-gxl-pinctrl", + .of_match_table = meson_gxl_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson_gxl_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 71bccb7acbf8..8fc1f1b45435 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -481,42 +481,6 @@ static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio) return !!(val & BIT(bit)); } -static const struct of_device_id meson_pinctrl_dt_match[] = { - { - .compatible = "amlogic,meson8-cbus-pinctrl", - .data = &meson8_cbus_pinctrl_data, - }, - { - .compatible = "amlogic,meson8b-cbus-pinctrl", - .data = &meson8b_cbus_pinctrl_data, - }, - { - .compatible = "amlogic,meson8-aobus-pinctrl", - .data = &meson8_aobus_pinctrl_data, - }, - { - .compatible = "amlogic,meson8b-aobus-pinctrl", - .data = &meson8b_aobus_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxbb-periphs-pinctrl", - .data = &meson_gxbb_periphs_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxbb-aobus-pinctrl", - .data = &meson_gxbb_aobus_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxl-periphs-pinctrl", - .data = &meson_gxl_periphs_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxl-aobus-pinctrl", - .data = &meson_gxl_aobus_pinctrl_data, - }, - { }, -}; - static int meson_gpiolib_register(struct meson_pinctrl *pc) { int ret; @@ -624,7 +588,7 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc, return 0; } -static int meson_pinctrl_probe(struct platform_device *pdev) +int meson_pinctrl_probe(struct platform_device *pdev) { const struct of_device_id *match; struct device *dev = &pdev->dev; @@ -636,10 +600,10 @@ static int meson_pinctrl_probe(struct platform_device *pdev) return -ENOMEM; pc->dev = dev; - match = of_match_node(meson_pinctrl_dt_match, pdev->dev.of_node); + match = of_match_node(dev->driver->of_match_table, dev->of_node); pc->data = (struct meson_pinctrl_data *) match->data; - ret = meson_pinctrl_parse_dt(pc, pdev->dev.of_node); + ret = meson_pinctrl_parse_dt(pc, dev->of_node); if (ret) return ret; @@ -659,12 +623,3 @@ static int meson_pinctrl_probe(struct platform_device *pdev) return meson_gpiolib_register(pc); } - -static struct platform_driver meson_pinctrl_driver = { - .probe = meson_pinctrl_probe, - .driver = { - .name = "meson-pinctrl", - .of_match_table = meson_pinctrl_dt_match, - }, -}; -builtin_platform_driver(meson_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h index 7ed0a80fd9dc..284157d43612 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.h +++ b/drivers/pinctrl/meson/pinctrl-meson.h @@ -13,6 +13,7 @@ #include <linux/gpio.h> #include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/types.h> @@ -165,11 +166,5 @@ struct meson_pinctrl { #define MESON_PIN(x) PINCTRL_PIN(x, #x) -extern struct meson_pinctrl_data meson8_cbus_pinctrl_data; -extern struct meson_pinctrl_data meson8_aobus_pinctrl_data; -extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data; -extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data; -extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data; -extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data; -extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data; -extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data; +/* Common probe function */ +int meson_pinctrl_probe(struct platform_device *pdev); diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c index fbf8ecd1c2b6..68b345fc105a 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8.c +++ b/drivers/pinctrl/meson/pinctrl-meson8.c @@ -1044,7 +1044,7 @@ static struct meson_bank meson8_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson8_cbus_pinctrl_data = { +static struct meson_pinctrl_data meson8_cbus_pinctrl_data = { .name = "cbus-banks", .pins = meson8_cbus_pins, .groups = meson8_cbus_groups, @@ -1056,7 +1056,7 @@ struct meson_pinctrl_data meson8_cbus_pinctrl_data = { .num_banks = ARRAY_SIZE(meson8_cbus_banks), }; -struct meson_pinctrl_data meson8_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson8_aobus_pinctrl_data = { .name = "ao-bank", .pins = meson8_aobus_pins, .groups = meson8_aobus_groups, @@ -1067,3 +1067,24 @@ struct meson_pinctrl_data meson8_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson8_aobus_functions), .num_banks = ARRAY_SIZE(meson8_aobus_banks), }; + +static const struct of_device_id meson8_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson8-cbus-pinctrl", + .data = &meson8_cbus_pinctrl_data, + }, + { + .compatible = "amlogic,meson8-aobus-pinctrl", + .data = &meson8_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson8_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson8-pinctrl", + .of_match_table = meson8_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson8_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c index 7af296db48c8..4d61df09bc3f 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8b.c +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c @@ -904,7 +904,7 @@ static struct meson_bank meson8b_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { +static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { .name = "cbus-banks", .pins = meson8b_cbus_pins, .groups = meson8b_cbus_groups, @@ -916,7 +916,7 @@ struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { .num_banks = ARRAY_SIZE(meson8b_cbus_banks), }; -struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { .name = "aobus-banks", .pins = meson8b_aobus_pins, .groups = meson8b_aobus_groups, @@ -927,3 +927,24 @@ struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson8b_aobus_functions), .num_banks = ARRAY_SIZE(meson8b_aobus_banks), }; + +static const struct of_device_id meson8b_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson8b-cbus-pinctrl", + .data = &meson8b_cbus_pinctrl_data, + }, + { + .compatible = "amlogic,meson8b-aobus-pinctrl", + .data = &meson8b_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson8b_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson8b-pinctrl", + .of_match_table = meson8b_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson8b_pinctrl_driver);
When meson pinctrl is enabled, all meson platforms pinctrl drivers are built in the kernel, with a significant amount of data. This leads to situation where pinctrl drivers targeting an architecture are also compiled and shipped on another one (ex: meson8 - ARM - compiled and shipped on ARM64 builds). This is a waste of memory we can easily avoid. This change makes 4 pinctrl drivers (1 per SoC) out the original single driver, allowing to compile and ship only the ones required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/pinctrl/Kconfig | 11 +------ drivers/pinctrl/meson/Kconfig | 36 +++++++++++++++++++++ drivers/pinctrl/meson/Makefile | 8 +++-- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 25 +++++++++++++-- drivers/pinctrl/meson/pinctrl-meson-gxl.c | 25 +++++++++++++-- drivers/pinctrl/meson/pinctrl-meson.c | 51 ++---------------------------- drivers/pinctrl/meson/pinctrl-meson.h | 11 ++----- drivers/pinctrl/meson/pinctrl-meson8.c | 25 +++++++++++++-- drivers/pinctrl/meson/pinctrl-meson8b.c | 25 +++++++++++++-- 9 files changed, 140 insertions(+), 77 deletions(-) create mode 100644 drivers/pinctrl/meson/Kconfig