| Message ID | 20170115222029.8271-3-martin.blumenstingl@googlemail.com |
|---|---|
| State | New |
| Headers | show |
On Sun, Jan 15, 2017 at 11:20 PM, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote: > This adds the missing node for the uart_AO_B port to the meson-gx.dtsi > (as this is supported by GXBB, GXL and GXM) along with the required > pinctrl pins. This is required as some boards are using it (the boards > from the Khadas VIM series for example have it exposed on the pin > headers). > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Please funnel this through the apropriate ARM SoC-feed tree. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes: > This adds the missing node for the uart_AO_B port to the meson-gx.dtsi > (as this is supported by GXBB, GXL and GXM) along with the required > pinctrl pins. This is required as some boards are using it (the boards > from the Khadas VIM series for example have it exposed on the pin > headers). > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Applied to v4.11/dt64. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index cddad8c795ec..5ece505dca71 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -324,6 +324,14 @@ status = "disabled"; }; + uart_AO_B: serial@4e0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x004e0 0x0 0x14>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + ir: ir@580 { compatible = "amlogic,meson-gxbb-ir"; reg = <0x0 0x00580 0x0 0x40>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 5d686334f692..474435e21759 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -138,6 +138,13 @@ }; }; + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_tx_ao_b", "uart_rx_ao_b"; + function = "uart_ao_b"; + }; + }; + remote_input_ao_pins: remote_input_ao { mux { groups = "remote_input_ao"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index bb2842f8a08f..53ed7a5f50ab 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -82,6 +82,13 @@ }; }; + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_tx_ao_b", "uart_rx_ao_b"; + function = "uart_ao_b"; + }; + }; + remote_input_ao_pins: remote_input_ao { mux { groups = "remote_input_ao";
This adds the missing node for the uart_AO_B port to the meson-gx.dtsi (as this is supported by GXBB, GXL and GXM) along with the required pinctrl pins. This is required as some boards are using it (the boards from the Khadas VIM series for example have it exposed on the pin headers). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 ++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 7 +++++++ 3 files changed, 22 insertions(+)