diff mbox series

[v5,13/17] firmware: qcom_scm: provide a read-modify-write function

Message ID 1694290578-17733-14-git-send-email-quic_mojha@quicinc.com
State New
Headers show
Series Add Qualcomm Minidump kernel driver related support | expand

Commit Message

Mukesh Ojha Sept. 9, 2023, 8:16 p.m. UTC
It was realized by Srinivas K. that there is a need of
read-modify-write scm exported function so that it can
be used by multiple clients.

Let's introduce qcom_scm_io_update_field() which masks
out the bits and write the passed value to that
bit-offset. Subsequent patch will use this function.

Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
---
 drivers/firmware/qcom_scm.c            | 20 ++++++++++++++++++++
 include/linux/firmware/qcom/qcom_scm.h |  2 ++
 2 files changed, 22 insertions(+)

Comments

Kathiravan Thirumoorthy Sept. 11, 2023, 8:08 a.m. UTC | #1
On 9/10/2023 1:46 AM, Mukesh Ojha wrote:
> It was realized by Srinivas K. that there is a need of
> read-modify-write scm exported function so that it can
> be used by multiple clients.
>
> Let's introduce qcom_scm_io_update_field() which masks
> out the bits and write the passed value to that
> bit-offset. Subsequent patch will use this function.
>
> Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
> ---


Validated this change on IPQ9574 and IPQ53332 and system is entering 
into the download mode.

Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IP9574 
and IPQ5332


>   drivers/firmware/qcom_scm.c            | 20 ++++++++++++++++++++
>   include/linux/firmware/qcom/qcom_scm.h |  2 ++
>   2 files changed, 22 insertions(+)
>
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index fde33acd46b7..5ea8fc4fd4e8 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -78,6 +78,7 @@ static const char * const qcom_scm_convention_names[] = {
>   };
>   
>   static struct qcom_scm *__scm;
> +static DEFINE_SPINLOCK(lock);
>   
>   static int qcom_scm_clk_enable(void)
>   {
> @@ -407,6 +408,25 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
>   }
>   EXPORT_SYMBOL(qcom_scm_set_remote_state);
>   
> +int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
> +{
> +	unsigned int old, new;
> +	int ret;
> +
> +	spin_lock(&lock);
> +	ret = qcom_scm_io_readl(addr, &old);
> +	if (ret)
> +		goto unlock;
> +
> +	new = (old & ~mask) | (val & mask);
> +
> +	ret = qcom_scm_io_writel(addr, new);
> +unlock:
> +	spin_unlock(&lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(qcom_scm_io_update_field);
> +
>   static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>   {
>   	struct qcom_scm_desc desc = {
> diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
> index 250ea4efb7cb..ca41e4eb33ad 100644
> --- a/include/linux/firmware/qcom/qcom_scm.h
> +++ b/include/linux/firmware/qcom/qcom_scm.h
> @@ -84,6 +84,8 @@ extern bool qcom_scm_pas_supported(u32 peripheral);
>   
>   extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
>   extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
> +extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask,
> +				    unsigned int val);
>   
>   extern bool qcom_scm_restore_sec_cfg_available(void);
>   extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
Kathiravan Thirumoorthy Sept. 11, 2023, 8:11 a.m. UTC | #2
On 9/11/2023 1:38 PM, Kathiravan Thirumoorthy wrote:
>
> On 9/10/2023 1:46 AM, Mukesh Ojha wrote:
>> It was realized by Srinivas K. that there is a need of
>> read-modify-write scm exported function so that it can
>> be used by multiple clients.
>>
>> Let's introduce qcom_scm_io_update_field() which masks
>> out the bits and write the passed value to that
>> bit-offset. Subsequent patch will use this function.
>>
>> Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
>> ---
>
>
> Validated this change on IPQ9574 and IPQ53332 and system is entering 
> into the download mode.
>
> Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # 
> IP9574 and IPQ5332


Couple of typos. Apologize...

Validated this change on IPQ9574 and IPQ5332 and system is entering into 
the download mode.

Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 
and IPQ5332


>
>
>>   drivers/firmware/qcom_scm.c            | 20 ++++++++++++++++++++
>>   include/linux/firmware/qcom/qcom_scm.h |  2 ++
>>   2 files changed, 22 insertions(+)
>>
>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
>> index fde33acd46b7..5ea8fc4fd4e8 100644
>> --- a/drivers/firmware/qcom_scm.c
>> +++ b/drivers/firmware/qcom_scm.c
>> @@ -78,6 +78,7 @@ static const char * const 
>> qcom_scm_convention_names[] = {
>>   };
>>     static struct qcom_scm *__scm;
>> +static DEFINE_SPINLOCK(lock);
>>     static int qcom_scm_clk_enable(void)
>>   {
>> @@ -407,6 +408,25 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
>>   }
>>   EXPORT_SYMBOL(qcom_scm_set_remote_state);
>>   +int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, 
>> unsigned int val)
>> +{
>> +    unsigned int old, new;
>> +    int ret;
>> +
>> +    spin_lock(&lock);
>> +    ret = qcom_scm_io_readl(addr, &old);
>> +    if (ret)
>> +        goto unlock;
>> +
>> +    new = (old & ~mask) | (val & mask);
>> +
>> +    ret = qcom_scm_io_writel(addr, new);
>> +unlock:
>> +    spin_unlock(&lock);
>> +    return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(qcom_scm_io_update_field);
>> +
>>   static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>>   {
>>       struct qcom_scm_desc desc = {
>> diff --git a/include/linux/firmware/qcom/qcom_scm.h 
>> b/include/linux/firmware/qcom/qcom_scm.h
>> index 250ea4efb7cb..ca41e4eb33ad 100644
>> --- a/include/linux/firmware/qcom/qcom_scm.h
>> +++ b/include/linux/firmware/qcom/qcom_scm.h
>> @@ -84,6 +84,8 @@ extern bool qcom_scm_pas_supported(u32 peripheral);
>>     extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
>>   extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
>> +extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int 
>> mask,
>> +                    unsigned int val);
>>     extern bool qcom_scm_restore_sec_cfg_available(void);
>>   extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
diff mbox series

Patch

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index fde33acd46b7..5ea8fc4fd4e8 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -78,6 +78,7 @@  static const char * const qcom_scm_convention_names[] = {
 };
 
 static struct qcom_scm *__scm;
+static DEFINE_SPINLOCK(lock);
 
 static int qcom_scm_clk_enable(void)
 {
@@ -407,6 +408,25 @@  int qcom_scm_set_remote_state(u32 state, u32 id)
 }
 EXPORT_SYMBOL(qcom_scm_set_remote_state);
 
+int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
+{
+	unsigned int old, new;
+	int ret;
+
+	spin_lock(&lock);
+	ret = qcom_scm_io_readl(addr, &old);
+	if (ret)
+		goto unlock;
+
+	new = (old & ~mask) | (val & mask);
+
+	ret = qcom_scm_io_writel(addr, new);
+unlock:
+	spin_unlock(&lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_scm_io_update_field);
+
 static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
 {
 	struct qcom_scm_desc desc = {
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index 250ea4efb7cb..ca41e4eb33ad 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -84,6 +84,8 @@  extern bool qcom_scm_pas_supported(u32 peripheral);
 
 extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
+extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask,
+				    unsigned int val);
 
 extern bool qcom_scm_restore_sec_cfg_available(void);
 extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);