diff mbox series

[v2,1/3] gpio: gpio-hisi: Add HiSilicon GPIO support

Message ID 1607934255-52544-2-git-send-email-luojiaxing@huawei.com
State New
Headers show
Series gpio: gpio-hisi: Add HiSilicon GPIO support | expand

Commit Message

Luo Jiaxing Dec. 14, 2020, 8:24 a.m. UTC 
This GPIO driver is for HiSilicon's ARM SoC.

HiSilicon's GPIO controller support double-edge interrupt and multi-core
concurrent access.

ACPI table example for this GPIO controller:
Device (GPO0)
{
	Name (_HID, "HISI0184")
	Device (PRTA)
	{
		Name (_ADR, Zero)
		Name (_UID, Zero)
		Name (_DSD, Package (0x01)
		{
			Package (0x02)
			{
				"ngpios",
				0x20
			}
		})
	}
}

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
---
 drivers/gpio/Kconfig     |  11 ++
 drivers/gpio/Makefile    |   1 +
 drivers/gpio/gpio-hisi.c | 328 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 340 insertions(+)
 create mode 100644 drivers/gpio/gpio-hisi.c

Comments

Linus Walleij Dec. 14, 2020, 9:11 a.m. UTC | #1 
On Mon, Dec 14, 2020 at 9:24 AM Luo Jiaxing <luojiaxing@huawei.com> wrote:

> This GPIO driver is for HiSilicon's ARM SoC.

Patch applied, any further issues can certainly be fixed in-tree.
Thanks for your excellent work on this driver!

Yours,
Linus Walleij
Andy Shevchenko Dec. 14, 2020, 4:58 p.m. UTC | #2 
On Mon, Dec 14, 2020 at 10:11:23AM +0100, Linus Walleij wrote:
> On Mon, Dec 14, 2020 at 9:24 AM Luo Jiaxing <luojiaxing@huawei.com> wrote:
> 
> > This GPIO driver is for HiSilicon's ARM SoC.
> 
> Patch applied, any further issues can certainly be fixed in-tree.

I just sent two :-)
Linus Walleij Dec. 14, 2020, 10:37 p.m. UTC | #3 
On Mon, Dec 14, 2020 at 5:57 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
> On Mon, Dec 14, 2020 at 10:11:23AM +0100, Linus Walleij wrote:
> > On Mon, Dec 14, 2020 at 9:24 AM Luo Jiaxing <luojiaxing@huawei.com> wrote:
> >
> > > This GPIO driver is for HiSilicon's ARM SoC.
> >
> > Patch applied, any further issues can certainly be fixed in-tree.
>
> I just sent two :-)

Thanks Andy!

Actually I kind like this in a way because then you also get some
credit for the heavy review work that you do on new drivers and
so often go uncredited.

I'm sometimes tempted to even add "Co-developed-by" for the
vast improvements you bring up. (Like on my YAS530 driver.)

Yours,
Linus Walleij
Andy Shevchenko Dec. 15, 2020, 9:49 a.m. UTC | #4 
On Tue, Dec 15, 2020 at 12:37 AM Linus Walleij <linus.walleij@linaro.org> wrote:
> On Mon, Dec 14, 2020 at 5:57 PM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> > On Mon, Dec 14, 2020 at 10:11:23AM +0100, Linus Walleij wrote:
> > > On Mon, Dec 14, 2020 at 9:24 AM Luo Jiaxing <luojiaxing@huawei.com> wrote:
> > >
> > > > This GPIO driver is for HiSilicon's ARM SoC.
> > >
> > > Patch applied, any further issues can certainly be fixed in-tree.
> >
> > I just sent two :-)
>
> Thanks Andy!
>
> Actually I kind like this in a way because then you also get some
> credit for the heavy review work that you do on new drivers and
> so often go uncredited.

You are welcome!

> I'm sometimes tempted to even add "Co-developed-by" for the
> vast improvements you bring up. (Like on my YAS530 driver.)

With the CdB tag the SoB must go (per documentation) and I can't give
you the latter one for your contribution for obvious reasons. OTOH
feel free to give credit in a free form in the cover letter / commit
message if you think it's good to have.
diff mbox series

Patch

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5d4de5c..2598209 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -296,6 +296,17 @@  config GPIO_GRGPIO
 	  Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
 	  VHDL IP core library.
 
+config GPIO_HISI
+	tristate "HiSilicon GPIO controller driver"
+	depends on (ARM64 || COMPILE_TEST) && ACPI
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y or M here to build support for the HiSilicon GPIO controller
+	  driver GPIO block.
+	  This GPIO controller support double-edge interrupt and multi-core
+	  concurrent access.
+
 config GPIO_HLWD
 	tristate "Nintendo Wii (Hollywood) GPIO"
 	depends on OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 09dada8..260ae25 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -63,6 +63,7 @@  obj-$(CONFIG_GPIO_GE_FPGA)		+= gpio-ge.o
 obj-$(CONFIG_GPIO_GPIO_MM)		+= gpio-gpio-mm.o
 obj-$(CONFIG_GPIO_GRGPIO)		+= gpio-grgpio.o
 obj-$(CONFIG_GPIO_GW_PLD)		+= gpio-gw-pld.o
+obj-$(CONFIG_GPIO_HISI)                 += gpio-hisi.o
 obj-$(CONFIG_GPIO_HLWD)			+= gpio-hlwd.o
 obj-$(CONFIG_HTC_EGPIO)			+= gpio-htc-egpio.o
 obj-$(CONFIG_GPIO_ICH)			+= gpio-ich.o
diff --git a/drivers/gpio/gpio-hisi.c b/drivers/gpio/gpio-hisi.c
new file mode 100644
index 0000000..a389780
--- /dev/null
+++ b/drivers/gpio/gpio-hisi.c
@@ -0,0 +1,328 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2020 HiSilicon Limited. */
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define HISI_GPIO_SWPORT_DR_SET_WX	0x000
+#define HISI_GPIO_SWPORT_DR_CLR_WX	0x004
+#define HISI_GPIO_SWPORT_DDR_SET_WX	0x010
+#define HISI_GPIO_SWPORT_DDR_CLR_WX	0x014
+#define HISI_GPIO_SWPORT_DDR_ST_WX	0x018
+#define HISI_GPIO_INTEN_SET_WX		0x020
+#define HISI_GPIO_INTEN_CLR_WX		0x024
+#define HISI_GPIO_INTMASK_SET_WX	0x030
+#define HISI_GPIO_INTMASK_CLR_WX	0x034
+#define HISI_GPIO_INTTYPE_EDGE_SET_WX	0x040
+#define HISI_GPIO_INTTYPE_EDGE_CLR_WX	0x044
+#define HISI_GPIO_INT_POLARITY_SET_WX	0x050
+#define HISI_GPIO_INT_POLARITY_CLR_WX	0x054
+#define HISI_GPIO_DEBOUNCE_SET_WX	0x060
+#define HISI_GPIO_DEBOUNCE_CLR_WX	0x064
+#define HISI_GPIO_INTSTATUS_WX		0x070
+#define HISI_GPIO_PORTA_EOI_WX		0x078
+#define HISI_GPIO_EXT_PORT_WX		0x080
+#define HISI_GPIO_INTCOMB_MASK_WX	0x0a0
+#define HISI_GPIO_INT_DEDGE_SET		0x0b0
+#define HISI_GPIO_INT_DEDGE_CLR		0x0b4
+#define HISI_GPIO_INT_DEDGE_ST		0x0b8
+
+#define HISI_GPIO_LINE_NUM_MAX	32
+#define HISI_GPIO_DRIVER_NAME	"gpio-hisi"
+
+struct hisi_gpio {
+	struct gpio_chip	chip;
+	struct device		*dev;
+	void __iomem		*reg_base;
+	unsigned int		line_num;
+	struct irq_chip		irq_chip;
+	int			irq;
+};
+
+static inline u32 hisi_gpio_read_reg(struct gpio_chip *chip,
+				     unsigned int off)
+{
+	struct hisi_gpio *hisi_gpio =
+			container_of(chip, struct hisi_gpio, chip);
+	void __iomem *reg = hisi_gpio->reg_base + off;
+
+	return readl(reg);
+}
+
+static inline void hisi_gpio_write_reg(struct gpio_chip *chip,
+				       unsigned int off, u32 val)
+{
+	struct hisi_gpio *hisi_gpio =
+			container_of(chip, struct hisi_gpio, chip);
+	void __iomem *reg = hisi_gpio->reg_base + off;
+
+	writel(val, reg);
+}
+
+static void hisi_gpio_set_debounce(struct gpio_chip *chip, unsigned int off,
+				   u32 debounce)
+{
+	if (debounce)
+		hisi_gpio_write_reg(chip, HISI_GPIO_DEBOUNCE_SET_WX, BIT(off));
+	else
+		hisi_gpio_write_reg(chip, HISI_GPIO_DEBOUNCE_CLR_WX, BIT(off));
+}
+
+static int hisi_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				unsigned long config)
+{
+	u32 config_para = pinconf_to_config_param(config);
+	u32 config_arg;
+
+	switch (config_para) {
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		config_arg = pinconf_to_config_argument(config);
+		hisi_gpio_set_debounce(chip, offset, config_arg);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static void hisi_gpio_set_ack(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+
+	hisi_gpio_write_reg(chip, HISI_GPIO_PORTA_EOI_WX, BIT(irqd_to_hwirq(d)));
+}
+
+static void hisi_gpio_irq_set_mask(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+
+	hisi_gpio_write_reg(chip, HISI_GPIO_INTMASK_SET_WX, BIT(irqd_to_hwirq(d)));
+}
+
+static void hisi_gpio_irq_clr_mask(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+
+	hisi_gpio_write_reg(chip, HISI_GPIO_INTMASK_CLR_WX, BIT(irqd_to_hwirq(d)));
+}
+
+static int hisi_gpio_irq_set_type(struct irq_data *d, u32 type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	unsigned int mask = BIT(irqd_to_hwirq(d));
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		hisi_gpio_write_reg(chip, HISI_GPIO_INT_DEDGE_SET, mask);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_SET_WX, mask);
+		hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_SET_WX, mask);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_SET_WX, mask);
+		hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_CLR_WX, mask);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_CLR_WX, mask);
+		hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_SET_WX, mask);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_CLR_WX, mask);
+		hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_CLR_WX, mask);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * The dual-edge interrupt and other interrupt's registers do not
+	 * take effect at the same time. The registers of the two-edge
+	 * interrupts have higher priorities, the configuration of
+	 * the dual-edge interrupts must be disabled before the configuration
+	 * of other kind of interrupts.
+	 */
+	if (type != IRQ_TYPE_EDGE_BOTH) {
+		unsigned int both = hisi_gpio_read_reg(chip, HISI_GPIO_INT_DEDGE_ST);
+
+		if (both & mask)
+			hisi_gpio_write_reg(chip, HISI_GPIO_INT_DEDGE_CLR, mask);
+	}
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_handler_locked(d, handle_level_irq);
+	else if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(d, handle_edge_irq);
+
+	return 0;
+}
+
+static void hisi_gpio_irq_enable(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+
+	hisi_gpio_irq_clr_mask(d);
+	hisi_gpio_write_reg(chip, HISI_GPIO_INTEN_SET_WX, BIT(irqd_to_hwirq(d)));
+}
+
+static void hisi_gpio_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+
+	hisi_gpio_irq_set_mask(d);
+	hisi_gpio_write_reg(chip, HISI_GPIO_INTEN_CLR_WX, BIT(irqd_to_hwirq(d)));
+}
+
+static void hisi_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct hisi_gpio *hisi_gpio = irq_desc_get_handler_data(desc);
+	unsigned long irq_msk = hisi_gpio_read_reg(&hisi_gpio->chip,
+						   HISI_GPIO_INTSTATUS_WX);
+	struct irq_chip *irq_c = irq_desc_get_chip(desc);
+	int hwirq;
+
+	chained_irq_enter(irq_c, desc);
+	for_each_set_bit(hwirq, &irq_msk, HISI_GPIO_LINE_NUM_MAX)
+		generic_handle_irq(irq_find_mapping(hisi_gpio->chip.irq.domain,
+						    hwirq));
+	chained_irq_exit(irq_c, desc);
+}
+
+static void hisi_gpio_init_irq(struct hisi_gpio *hisi_gpio)
+{
+	struct gpio_chip *chip = &hisi_gpio->chip;
+	struct gpio_irq_chip *girq_chip = &chip->irq;
+
+	/* Set hooks for irq_chip */
+	hisi_gpio->irq_chip.irq_ack = hisi_gpio_set_ack;
+	hisi_gpio->irq_chip.irq_mask = hisi_gpio_irq_set_mask;
+	hisi_gpio->irq_chip.irq_unmask = hisi_gpio_irq_clr_mask;
+	hisi_gpio->irq_chip.irq_set_type = hisi_gpio_irq_set_type;
+	hisi_gpio->irq_chip.irq_enable = hisi_gpio_irq_enable;
+	hisi_gpio->irq_chip.irq_disable = hisi_gpio_irq_disable;
+
+	girq_chip->chip = &hisi_gpio->irq_chip;
+	girq_chip->default_type = IRQ_TYPE_NONE;
+	girq_chip->num_parents = 1;
+	girq_chip->parents = &hisi_gpio->irq;
+	girq_chip->parent_handler = hisi_gpio_irq_handler;
+	girq_chip->parent_handler_data = hisi_gpio;
+
+	/* Clear Mask of GPIO controller combine IRQ */
+	hisi_gpio_write_reg(chip, HISI_GPIO_INTCOMB_MASK_WX, 1);
+}
+
+static const struct acpi_device_id hisi_gpio_acpi_match[] = {
+	{"HISI0184", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, hisi_gpio_acpi_match);
+
+static void hisi_gpio_get_pdata(struct device *dev,
+				struct hisi_gpio *hisi_gpio)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct fwnode_handle *fwnode;
+	int idx = 0;
+
+	device_for_each_child_node(dev, fwnode)  {
+		/* Cycle for once, no need for an array to save line_num */
+		if (fwnode_property_read_u32(fwnode, "ngpios",
+					     &hisi_gpio->line_num)) {
+			dev_err(dev,
+				"failed to get number of lines for port%d and use default value instead\n",
+				idx);
+			hisi_gpio->line_num = HISI_GPIO_LINE_NUM_MAX;
+		}
+
+		if (WARN_ON(hisi_gpio->line_num > HISI_GPIO_LINE_NUM_MAX))
+			hisi_gpio->line_num = HISI_GPIO_LINE_NUM_MAX;
+
+		hisi_gpio->irq = platform_get_irq(pdev, idx);
+
+		dev_info(dev,
+			 "get hisi_gpio[%d] with %d lines\n", idx,
+			 hisi_gpio->line_num);
+
+		idx++;
+	}
+}
+
+static int hisi_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *dat, *set, *clr;
+	struct hisi_gpio *hisi_gpio;
+	int port_num;
+	int ret;
+
+	/*
+	 * One GPIO controller own one port currently,
+	 * if we get more from ACPI table, return error.
+	 */
+	port_num = device_get_child_node_count(dev);
+	if (WARN_ON(port_num != 1))
+		return -ENODEV;
+
+	hisi_gpio = devm_kzalloc(dev, sizeof(*hisi_gpio), GFP_KERNEL);
+	if (!hisi_gpio)
+		return -ENOMEM;
+
+	hisi_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hisi_gpio->reg_base))
+		return PTR_ERR(hisi_gpio->reg_base);
+
+	hisi_gpio_get_pdata(dev, hisi_gpio);
+
+	hisi_gpio->dev = dev;
+
+	dat = hisi_gpio->reg_base + HISI_GPIO_EXT_PORT_WX;
+	set = hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_SET_WX;
+	clr = hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_CLR_WX;
+
+	ret = bgpio_init(&hisi_gpio->chip, hisi_gpio->dev, 0x4,
+			 hisi_gpio->reg_base + HISI_GPIO_EXT_PORT_WX,
+			 hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_SET_WX,
+			 hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_CLR_WX,
+			 hisi_gpio->reg_base + HISI_GPIO_SWPORT_DDR_SET_WX,
+			 hisi_gpio->reg_base + HISI_GPIO_SWPORT_DDR_CLR_WX,
+			 BGPIOF_NO_SET_ON_INPUT);
+	if (ret) {
+		dev_err(dev, "failed to init, ret = %d\n", ret);
+		return ret;
+	}
+
+	hisi_gpio->chip.set_config = hisi_gpio_set_config;
+	hisi_gpio->chip.ngpio = hisi_gpio->line_num;
+	hisi_gpio->chip.bgpio_dir_unreadable = 1;
+	hisi_gpio->chip.base = -1;
+
+	if (hisi_gpio->irq > 0)
+		hisi_gpio_init_irq(hisi_gpio);
+
+	ret = devm_gpiochip_add_data(dev, &hisi_gpio->chip, hisi_gpio);
+	if (ret) {
+		dev_err(dev, "failed to register gpiochip, ret = %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver hisi_gpio_driver = {
+	.driver		= {
+		.name	= HISI_GPIO_DRIVER_NAME,
+		.acpi_match_table = hisi_gpio_acpi_match,
+	},
+	.probe		= hisi_gpio_probe,
+};
+
+module_platform_driver(hisi_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Luo Jiaxing <luojiaxing@huawei.com>");
+MODULE_DESCRIPTION("HiSilicon GPIO controller driver");
+MODULE_ALIAS("platform:" HISI_GPIO_DRIVER_NAME);