@@ -1070,7 +1070,6 @@
.ngrps = ARRAY_SIZE(mtk_pins_mt6765),
.eint_hw = &mt6765_eint_hw,
.gpio_m = 0,
- .ies_present = true,
.base_names = mt6765_pinctrl_register_base_names,
.nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
.bias_disable_set = mtk_pinconf_bias_disable_set,
@@ -554,7 +554,6 @@
.ngrps = ARRAY_SIZE(mtk_pins_mt8183),
.eint_hw = &mt8183_eint_hw,
.gpio_m = 0,
- .ies_present = true,
.base_names = mt8183_pinctrl_register_base_names,
.nbase_names = ARRAY_SIZE(mt8183_pinctrl_register_base_names),
.bias_disable_set = mtk_pinconf_bias_disable_set_rev1,
@@ -81,37 +81,30 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
int val, val2, err, reg, ret = 1;
const struct mtk_pin_desc *desc;
- if (pin >= hw->soc->npins)
- return -EINVAL;
+ if (pin >= hw->soc->npins) {
+ err = -EINVAL;
+ goto out;
+ }
desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_get) {
+ if (hw->soc->bias_disable_get)
err = hw->soc->bias_disable_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_get) {
+ if (hw->soc->bias_get)
err = hw->soc->bias_get(hw, desc, 1, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_get) {
+ if (hw->soc->bias_get)
err = hw->soc->bias_get(hw, desc, 0, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_SLEW_RATE:
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &val);
@@ -126,12 +119,16 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_OUTPUT_ENABLE:
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
if (err)
- return err;
-
- /* HW takes input mode as zero; output mode as non-zero */
- if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
- (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
- return -EINVAL;
+ goto out;
+ /* CONFIG Current direction return value
+ * ------------- ----------------- ----------------------
+ * OUTPUT_ENABLE output 1 (= HW value)
+ * input 0 (= HW value)
+ * INPUT_ENABLE output 0 (= reverse HW value)
+ * input 1 (= reverse HW value)
+ */
+ if (param == PIN_CONFIG_INPUT_ENABLE)
+ val = !val;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
@@ -148,13 +145,10 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
break;
case PIN_CONFIG_DRIVE_STRENGTH:
- if (hw->soc->drive_get) {
+ if (hw->soc->drive_get)
err = hw->soc->drive_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
+ else
err = -ENOTSUPP;
- }
break;
case MTK_PIN_CONFIG_TDSEL:
case MTK_PIN_CONFIG_RDSEL:
@@ -175,28 +169,24 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
pullup = param == MTK_PIN_CONFIG_PU_ADV;
err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ } else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_DRV_ADV:
- if (hw->soc->adv_drive_get) {
+ if (hw->soc->adv_drive_get)
err = hw->soc->adv_drive_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
default:
- return -ENOTSUPP;
+ err = -ENOTSUPP;
}
- *config = pinconf_to_config_packed(param, ret);
+out:
+ if (!err)
+ *config = pinconf_to_config_packed(param, ret);
- return 0;
+ return err;
}
static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
@@ -216,60 +206,47 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
switch ((u32)param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_set) {
+ if (hw->soc->bias_disable_set)
err = hw->soc->bias_disable_set(hw, desc);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_set) {
+ if (hw->soc->bias_set)
err = hw->soc->bias_set(hw, desc, 1);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_set) {
+ if (hw->soc->bias_set)
err = hw->soc->bias_set(hw, desc, 0);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_OUTPUT_ENABLE:
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
MTK_DISABLE);
- if (err)
+ /* Keep set direction to consider the case that a GPIO pin
+ * does not have SMT control
+ */
+ if (err != -ENOTSUPP)
goto err;
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
MTK_OUTPUT);
- if (err)
- goto err;
break;
case PIN_CONFIG_INPUT_ENABLE:
- if (hw->soc->ies_present) {
- mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES,
- MTK_ENABLE);
- }
+ /* regard all non-zero value as enable */
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES, !!arg);
+ if (err)
+ goto err;
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
MTK_INPUT);
- if (err)
- goto err;
break;
case PIN_CONFIG_SLEW_RATE:
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR,
- arg);
- if (err)
- goto err;
-
+ /* regard all non-zero value as enable */
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR, !!arg);
break;
case PIN_CONFIG_OUTPUT:
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
@@ -279,41 +256,29 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
arg);
- if (err)
- goto err;
break;
+ case PIN_CONFIG_INPUT_SCHMITT:
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
/* arg = 1: Input mode & SMT enable ;
* arg = 0: Output mode & SMT disable
*/
- arg = arg ? 2 : 1;
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
- arg & 1);
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !arg);
if (err)
goto err;
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
- !!(arg & 2));
- if (err)
- goto err;
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, !!arg);
break;
case PIN_CONFIG_DRIVE_STRENGTH:
- if (hw->soc->drive_set) {
+ if (hw->soc->drive_set)
err = hw->soc->drive_set(hw, desc, arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_TDSEL:
case MTK_PIN_CONFIG_RDSEL:
reg = (param == MTK_PIN_CONFIG_TDSEL) ?
PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
err = mtk_hw_set_value(hw, desc, reg, arg);
- if (err)
- goto err;
break;
case MTK_PIN_CONFIG_PU_ADV:
case MTK_PIN_CONFIG_PD_ADV:
@@ -323,20 +288,14 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
pullup = param == MTK_PIN_CONFIG_PU_ADV;
err = hw->soc->adv_pull_set(hw, desc, pullup,
arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ } else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_DRV_ADV:
- if (hw->soc->adv_drive_set) {
+ if (hw->soc->adv_drive_set)
err = hw->soc->adv_drive_set(hw, desc, arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
default:
err = -ENOTSUPP;
1.Refine mtk_pinconf_get(): Use only one occurrence of return at end of this function. 2.Refine mtk_pinconf_set(): 2.1 Use only one occurrence of return at end of this function. 2.2 Modify case of PIN_CONFIG_INPUT_ENABLE - 2.2.1 Regard all non-zero setting value as enable, instead of always enable. 2.2.2 Remove check of ies_present flag and always invoke mtk_hw_set_value() since mtk_hw_pin_field_lookup() invoked inside mtk_hw_set_value() has the same effect of checking if ies control is supported. [The rationale is that: available of a control is always checked in mtk_hw_pin_field_lookup() and no need to add ies_present flag specially for ies control.] 2.3 Simply code logic for case of PIN_CONFIG_INPUT_SCHMITT. 2.4 Add case for PIN_CONFIG_INPUT_SCHMITT_ENABLE and process it with the same code for case of PIN_CONFIG_INPUT_SCHMITT. Change-Id: I7adef3550ccbb11aee3ddaf014bbd9f54a9ad089 --- drivers/pinctrl/mediatek/pinctrl-mt6765.c | 1 - drivers/pinctrl/mediatek/pinctrl-mt8183.c | 1 - drivers/pinctrl/mediatek/pinctrl-paris.c | 171 ++++++++++++------------------ 3 files changed, 65 insertions(+), 108 deletions(-)