Message ID | 1474630018-9986-1-git-send-email-navam@xilinx.com |
---|---|
State | New |
Headers | show |
On Fri, Sep 23, 2016 at 1:26 PM, Nava kishore Manne <nava.manne@xilinx.com> wrote: > From: Nava kishore Manne <nava.manne@xilinx.com> > > This patch adds zynq specific check for bank 0 pins 7 and 8 > are special and cannot be used as inputs > > Signed-off-by: Nava kishore Manne <navam@xilinx.com> > Reported-by: Jonas Karlsson <Jonas.d.karlsson@gmail.com> > Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> > Acked-by: Michal Simek <michal.simek@xilinx.com> > --- > Changes for v3: > -Fixed some minor comments. Patch applied. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 23/09/2016 14.26, Nava kishore Manne wrote: > From: Nava kishore Manne <nava.manne@xilinx.com> > > This patch adds zynq specific check for bank 0 pins 7 and 8 > are special and cannot be used as inputs > > Signed-off-by: Nava kishore Manne <navam@xilinx.com> > Reported-by: Jonas Karlsson <Jonas.d.karlsson@gmail.com> > Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> > Acked-by: Michal Simek <michal.simek@xilinx.com> > --- > Changes for v3: > -Fixed some minor comments. > Changes for v2: > -Removed un-used quirks for zynqmp. > > drivers/gpio/gpio-zynq.c | 15 +++++++++++++-- > 1 file changed, 13 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c > index e72794e..6b4d10d 100644 > --- a/drivers/gpio/gpio-zynq.c > +++ b/drivers/gpio/gpio-zynq.c > @@ -96,6 +96,9 @@ > /* GPIO upper 16 bit mask */ > #define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000 > > +/* For GPIO quirks */ > +#define ZYNQ_GPIO_QUIRK_FOO BIT(0) Should this be a bit more descriptive than FOO? -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c index e72794e..6b4d10d 100644 --- a/drivers/gpio/gpio-zynq.c +++ b/drivers/gpio/gpio-zynq.c @@ -96,6 +96,9 @@ /* GPIO upper 16 bit mask */ #define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000 +/* For GPIO quirks */ +#define ZYNQ_GPIO_QUIRK_FOO BIT(0) + /** * struct zynq_gpio - gpio device private data structure * @chip: instance of the gpio_chip @@ -122,6 +125,7 @@ struct zynq_gpio { */ struct zynq_platform_data { const char *label; + u32 quirks; u16 ngpio; int max_bank; int bank_min[ZYNQMP_GPIO_MAX_BANK]; @@ -238,13 +242,19 @@ static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin, static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin) { u32 reg; + bool is_zynq_gpio; unsigned int bank_num, bank_pin_num; struct zynq_gpio *gpio = gpiochip_get_data(chip); + is_zynq_gpio = gpio->p_data->quirks & ZYNQ_GPIO_QUIRK_FOO; zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); - /* bank 0 pins 7 and 8 are special and cannot be used as inputs */ - if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8)) + /* + * On zynq bank 0 pins 7 and 8 are special and cannot be used + * as inputs. + */ + if (is_zynq_gpio && bank_num == 0 && + (bank_pin_num == 7 || bank_pin_num == 8)) return -EINVAL; /* clear the bit in direction mode reg to set the pin as input */ @@ -627,6 +637,7 @@ static const struct zynq_platform_data zynqmp_gpio_def = { static const struct zynq_platform_data zynq_gpio_def = { .label = "zynq_gpio", + .quirks = ZYNQ_GPIO_QUIRK_FOO, .ngpio = ZYNQ_GPIO_NR_GPIOS, .max_bank = ZYNQ_GPIO_MAX_BANK, .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),