diff mbox

[2/2] pinctrl: uniphier: fix meaningless drive control offsets

Message ID 1465978686-28578-3-git-send-email-yamada.masahiro@socionext.com
State New
Headers show

Commit Message

Masahiro Yamada June 15, 2016, 8:18 a.m. UTC 
These are input-only pins.  They do not support drive controlling
in the first place.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Linus Walleij June 18, 2016, 8:03 a.m. UTC | #1 
On Wed, Jun 15, 2016 at 10:18 AM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:

> These are input-only pins.  They do not support drive controlling
> in the first place.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Patch applied.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
index 8c61493..002bd6e 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
@@ -138,7 +138,7 @@  static const struct pinctrl_pin_desc uniphier_pro4_pins[] = {
 			     38, UNIPHIER_PIN_DRV_1BIT,
 			     38, UNIPHIER_PIN_PULL_DOWN),
 	UNIPHIER_PINCTRL_PIN(39, "BOOTSWAP", UNIPHIER_PIN_IECTRL_NONE,
-			     39, UNIPHIER_PIN_DRV_NONE,
+			     -1, UNIPHIER_PIN_DRV_NONE,
 			     39, UNIPHIER_PIN_PULL_UP),
 	UNIPHIER_PINCTRL_PIN(40, "NFD0", UNIPHIER_PIN_IECTRL_NONE,
 			     2, UNIPHIER_PIN_DRV_2BIT,
@@ -639,7 +639,7 @@  static const struct pinctrl_pin_desc uniphier_pro4_pins[] = {
 			     191, UNIPHIER_PIN_DRV_1BIT,
 			     191, UNIPHIER_PIN_PULL_DOWN),
 	UNIPHIER_PINCTRL_PIN(206, "CLK54I", UNIPHIER_PIN_IECTRL_NONE,
-			     192, UNIPHIER_PIN_DRV_NONE,
+			     -1, UNIPHIER_PIN_DRV_NONE,
 			     192, UNIPHIER_PIN_PULL_DOWN),
 	UNIPHIER_PINCTRL_PIN(207, "YIN0", UNIPHIER_PIN_IECTRL_NONE,
 			     193, UNIPHIER_PIN_DRV_1BIT,
@@ -1005,7 +1005,7 @@  static const struct pinctrl_pin_desc uniphier_pro4_pins[] = {
 			     311, UNIPHIER_PIN_DRV_1BIT,
 			     311, UNIPHIER_PIN_PULL_UP),
 	UNIPHIER_PINCTRL_PIN(328, "DMDISO", UNIPHIER_PIN_IECTRL_NONE,
-			     312, UNIPHIER_PIN_DRV_NONE,
+			     -1, UNIPHIER_PIN_DRV_NONE,
 			     312, UNIPHIER_PIN_PULL_DOWN),
 };