@@ -1,7 +1,14 @@
Lantiq XWAY pinmux controller
Required properties:
-- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9"
+- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use XWAY DANUBE Family)
+ "lantiq,pinctrl-xr9", (DEPRECATED: Use XWAY xRX100/xRX200 Family)
+ "lantiq,pinctrl-<chip>", where <chip> is:
+ "ase" (XWAY AMAZON Family)
+ "danube" (XWAY DANUBE Family)
+ "xrx100" (XWAY xRX100 Family)
+ "xrx200" (XWAY xRX200 Family)
+ "xrx300" (XWAY xRX300 Family)
- reg: Should contain the physical address and length of the gpio/pinmux
register range
@@ -36,19 +43,87 @@ Required subnode-properties:
Valid values for group and function names:
+XWAY: (DEPRECATED: Use DANUBE)
mux groups:
exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
- spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2,
+ spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2,
gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
req3
- additional mux groups (XR9 only):
- mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu
+
+XR9: ( DEPRECATED: Use xRX100/xRX200)
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25,
+ ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy,
+ nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6,
+ asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
+ clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
+ gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
+
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy
+
+AMAZON:
+ mux groups:
+ exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
+ spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
+ clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
+
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
+
+DANUBE:
+ mux groups:
+ exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
+ ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
+ spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
+ gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
+ req1, req2, req3, dfe led0, dfe led1
functions:
- spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
+xRX100:
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+ ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+ spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+ spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
+ clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
+ dfe led0, dfe led1
+
+ functions:
+ spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
+
+xRX200:
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+ ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+ spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+ spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
+ usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
+ usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
+ stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
+ gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
+ gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
+
+ functions:
+ spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
+
+xRX300:
+ mux groups:
+ exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
+ nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
+ nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
+ spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
+ usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
+ mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
+
+ functions:
+ spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
Definition of pin configurations:
@@ -62,15 +137,32 @@ Optional subnode-properties:
0: none, 1: down, 2: up.
- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
-Valid values for XWAY pin names:
+Valid values for XWAY pin names: (DEPRECATED: Use DANUBE)
Pinconf pins can be referenced via the names io0-io31.
-Valid values for XR9 pin names:
+Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200)
Pinconf pins can be referenced via the names io0-io55.
+Valid values for AMAZON pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for DANUBE pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for xRX100 pin names:
+ Pinconf pins can be referenced via the names io0-io55.
+
+Valid values for xRX200 pin names:
+ Pinconf pins can be referenced via the names io0-io49.
+
+Valid values for xRX300 pin names:
+ Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
+ io13-io19,io23-io27,io34-io36,
+ io42-io43,io48-io61.
+
Example:
gpio: pinmux@E100B10 {
- compatible = "lantiq,pinctrl-xway";
+ compatible = "lantiq,pinctrl-danube";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
This patch adds the new dedicated "lantiq,pinctrl-<chip>" compatible strings to the devicetree bindings Documentation, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or "xrx300" and marks the "lantiq,pinctrl-xway" and "lantiq,pinctrl-xr9" compatible strings as DEPRECATED. Signed-off-by: Martin Schiller <mschiller@tdt.de> --- .../bindings/pinctrl/lantiq,pinctrl-xway.txt | 108 +++++++++++++++++++-- 1 file changed, 100 insertions(+), 8 deletions(-)