| Message ID | 1437073704-13881-4-git-send-email-u.kleine-koenig@pengutronix.de |
|---|---|
| State | New |
| Headers | show |
On Thu, Jul 16, 2015 at 9:08 PM, Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Patch applied.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt new file mode 100644 index 000000000000..0449fc4013f2 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -0,0 +1,24 @@ +* Freescale MPC512x/MPC8xxx GPIO controller + +Required properties: +- compatible : Should be "fsl,<soc>-gpio" + The following <soc>s are known to be supported: + mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq +- reg : Address and length of the register set for the device +- interrupts : Should be the port interrupt shared by all 32 pins. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low + +Example: + +gpio0: gpio@1100 { + compatible = "fsl,mpc5125-gpio"; + #gpio-cells = <2>; + reg = <0x1100 0x080>; + interrupts = <78 0x8>; + status = "okay"; +}; + +
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- .../devicetree/bindings/gpio/gpio-mpc8xxx.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt