[V3,2/5] MIPS: Loongson: Add Loongson-3A/3B GPIO support

Message ID	1415794700-7579-1-git-send-email-chenhc@lemote.com
State	Superseded
Headers	show Return-Path: <linux-gpio-owner@vger.kernel.org> From: Huacai Chen <chenhc@lemote.com> To: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org>, "Steven J. Hill" <Steven.Hill@imgtec.com>, linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>, Zhangjin Wu <wuzhangjin@gmail.com>, linux-gpio@vger.kernel.org, Huacai Chen <chenhc@lemote.com>, Hongbing Hu <huhb@lemote.com> Subject: [PATCH V3 2/5] MIPS: Loongson: Add Loongson-3A/3B GPIO support Date: Wed, 12 Nov 2014 20:18:20 +0800 Message-Id: <1415794700-7579-1-git-send-email-chenhc@lemote.com> Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e10d704..7541a0e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1199,6 +1199,7 @@ config CPU_LOONGSON3 select CPU_SUPPORTS_HUGEPAGES select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC + select ARCH_REQUIRE_GPIOLIB help The Loongson 3 processor implements the MIPS64R2 instruction set with many extensions. diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 227a9de..0549b01 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -172,6 +172,7 @@ CONFIG_SERIAL_8250_FOURPORT=y CONFIG_LEGACY_PTY_COUNT=16 CONFIG_HW_RANDOM=y CONFIG_RTC=y +CONFIG_GPIO_LOONGSON=y CONFIG_THERMAL=y CONFIG_MEDIA_SUPPORT=m CONFIG_VIDEO_DEV=m diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 1c6191e..e7a9bb4 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -243,6 +243,7 @@ CONFIG_HW_RANDOM=y CONFIG_RAW_DRIVER=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_PIIX4=y +CONFIG_GPIO_LOONGSON=y CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM93=m CONFIG_SENSORS_W83627HF=m diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 0bb9cc9..15fef59 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -4,7 +4,6 @@ obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ bonito-irq.o mem.o machtype.o platform.o -obj-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PCI) += pci.o # diff --git a/arch/mips/loongson/common/gpio.c b/arch/mips/loongson/common/gpio.c deleted file mode 100644 index 29dbaa2..0000000 --- a/arch/mips/loongson/common/gpio.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * STLS2F GPIO Support - * - * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com> - * Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/err.h> -#include <asm/types.h> -#include <loongson.h> -#include <linux/gpio.h> - -#define STLS2F_N_GPIO 4 -#define STLS2F_GPIO_IN_OFFSET 16 - -static DEFINE_SPINLOCK(gpio_lock); - -int gpio_get_value(unsigned gpio) -{ - u32 val; - u32 mask; - - if (gpio >= STLS2F_N_GPIO) - return __gpio_get_value(gpio); - - mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET); - spin_lock(&gpio_lock); - val = LOONGSON_GPIODATA; - spin_unlock(&gpio_lock); - - return (val & mask) != 0; -} -EXPORT_SYMBOL(gpio_get_value); - -void gpio_set_value(unsigned gpio, int state) -{ - u32 val; - u32 mask; - - if (gpio >= STLS2F_N_GPIO) { - __gpio_set_value(gpio, state); - return ; - } - - mask = 1 << gpio; - - spin_lock(&gpio_lock); - val = LOONGSON_GPIODATA; - if (state) - val |= mask; - else - val &= (~mask); - LOONGSON_GPIODATA = val; - spin_unlock(&gpio_lock); -} -EXPORT_SYMBOL(gpio_set_value); - -int gpio_cansleep(unsigned gpio) -{ - if (gpio < STLS2F_N_GPIO) - return 0; - else - return __gpio_cansleep(gpio); -} -EXPORT_SYMBOL(gpio_cansleep); - -static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -{ - u32 temp; - u32 mask; - - if (gpio >= STLS2F_N_GPIO) - return -EINVAL; - - spin_lock(&gpio_lock); - mask = 1 << gpio; - temp = LOONGSON_GPIOIE; - temp |= mask; - LOONGSON_GPIOIE = temp; - spin_unlock(&gpio_lock); - - return 0; -} - -static int ls2f_gpio_direction_output(struct gpio_chip *chip, - unsigned gpio, int level) -{ - u32 temp; - u32 mask; - - if (gpio >= STLS2F_N_GPIO) - return -EINVAL; - - gpio_set_value(gpio, level); - spin_lock(&gpio_lock); - mask = 1 << gpio; - temp = LOONGSON_GPIOIE; - temp &= (~mask); - LOONGSON_GPIOIE = temp; - spin_unlock(&gpio_lock); - - return 0; -} - -static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -{ - return gpio_get_value(gpio); -} - -static void ls2f_gpio_set_value(struct gpio_chip *chip, - unsigned gpio, int value) -{ - gpio_set_value(gpio, value); -} - -static struct gpio_chip ls2f_chip = { - .label = "ls2f", - .direction_input = ls2f_gpio_direction_input, - .get = ls2f_gpio_get_value, - .direction_output = ls2f_gpio_direction_output, - .set = ls2f_gpio_set_value, - .base = 0, - .ngpio = STLS2F_N_GPIO, -}; - -static int __init ls2f_gpio_setup(void) -{ - return gpiochip_add(&ls2f_chip); -} -arch_initcall(ls2f_gpio_setup); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0959ca9..1ef82b2 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -452,6 +452,12 @@ config GPIO_GRGPIO Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB VHDL IP core library. +config GPIO_LOONGSON + tristate "Loongson-2/3 GPIO support" + depends on CPU_LOONGSON2 || CPU_LOONGSON3 + help + driver for GPIO functionality on Loongson-2F/3A/3B processors. + config GPIO_TB10X bool select GENERIC_IRQ_CHIP diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index e5d346c..2153a71 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o +obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o diff --git a/drivers/gpio/gpio-loongson.c b/drivers/gpio/gpio-loongson.c new file mode 100644 index 0000000..394fb1d --- /dev/null +++ b/drivers/gpio/gpio-loongson.c @@ -0,0 +1,148 @@ +/* + * Loongson-2F/3A/3B GPIO Support + * + * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com> + * Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com> + * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/err.h> +#include <asm/types.h> +#include <loongson.h> +#include <linux/gpio.h> + +#define STLS2F_N_GPIO 4 +#define STLS3A_N_GPIO 16 + +#ifdef CONFIG_CPU_LOONGSON3 +#define LOONGSON_N_GPIO STLS3A_N_GPIO +#else +#define LOONGSON_N_GPIO STLS2F_N_GPIO +#endif + +#define LOONGSON_GPIO_IN_OFFSET 16 + +static DEFINE_SPINLOCK(gpio_lock); + +int gpio_get_value(unsigned gpio) +{ + u32 val; + u32 mask; + + if (gpio >= LOONGSON_N_GPIO) + return __gpio_get_value(gpio); + + mask = 1 << (gpio + LOONGSON_GPIO_IN_OFFSET); + spin_lock(&gpio_lock); + val = LOONGSON_GPIODATA; + spin_unlock(&gpio_lock); + + return (val & mask) != 0; +} +EXPORT_SYMBOL(gpio_get_value); + +void gpio_set_value(unsigned gpio, int state) +{ + u32 val; + u32 mask; + + if (gpio >= LOONGSON_N_GPIO) { + __gpio_set_value(gpio, state); + return ; + } + + mask = 1 << gpio; + + spin_lock(&gpio_lock); + val = LOONGSON_GPIODATA; + if (state) + val |= mask; + else + val &= (~mask); + LOONGSON_GPIODATA = val; + spin_unlock(&gpio_lock); +} +EXPORT_SYMBOL(gpio_set_value); + +int gpio_cansleep(unsigned gpio) +{ + if (gpio < LOONGSON_N_GPIO) + return 0; + else + return __gpio_cansleep(gpio); +} +EXPORT_SYMBOL(gpio_cansleep); + +static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + u32 temp; + u32 mask; + + if (gpio >= LOONGSON_N_GPIO) + return -EINVAL; + + spin_lock(&gpio_lock); + mask = 1 << gpio; + temp = LOONGSON_GPIOIE; + temp |= mask; + LOONGSON_GPIOIE = temp; + spin_unlock(&gpio_lock); + + return 0; +} + +static int loongson_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int level) +{ + u32 temp; + u32 mask; + + if (gpio >= LOONGSON_N_GPIO) + return -EINVAL; + + gpio_set_value(gpio, level); + spin_lock(&gpio_lock); + mask = 1 << gpio; + temp = LOONGSON_GPIOIE; + temp &= (~mask); + LOONGSON_GPIOIE = temp; + spin_unlock(&gpio_lock); + + return 0; +} + +static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + return gpio_get_value(gpio); +} + +static void loongson_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + gpio_set_value(gpio, value); +} + +static struct gpio_chip loongson_chip = { + .label = "Loongson-gpio-chip", + .direction_input = loongson_gpio_direction_input, + .get = loongson_gpio_get_value, + .direction_output = loongson_gpio_direction_output, + .set = loongson_gpio_set_value, + .base = 0, + .ngpio = LOONGSON_N_GPIO, +}; + +static int __init loongson_gpio_setup(void) +{ + return gpiochip_add(&loongson_chip); +} +postcore_initcall(loongson_gpio_setup);

[V3,2/5] MIPS: Loongson: Add Loongson-3A/3B GPIO support

Commit Message

Comments

Patch