diff mbox

[09/15] ARM: sa1100: don't preallocate IRQ space for locomo

Message ID 1414454528-24240-10-git-send-email-dbaryshkov@gmail.com
State Not Applicable
Headers show

Commit Message

Dmitry Baryshkov Oct. 28, 2014, 12:02 a.m. UTC
As new locomo driver properly supports SPARSE_IRQ, stop playing with
NR_IRQS on sa1100 (locomo was the last chip requiring NR_IRQ tricks).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/include/mach/irqs.h | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

Comments

Linus Walleij Oct. 31, 2014, 7:50 a.m. UTC | #1
On Tue, Oct 28, 2014 at 1:02 AM, Dmitry Eremin-Solenikov
<dbaryshkov@gmail.com> wrote:

> As new locomo driver properly supports SPARSE_IRQ, stop playing with
> NR_IRQS on sa1100 (locomo was the last chip requiring NR_IRQ tricks).
>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

That's right! By moving to irqdomain things get even better :)

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dmitry Baryshkov Oct. 31, 2014, 9:33 a.m. UTC | #2
2014-10-31 10:50 GMT+03:00 Linus Walleij <linus.walleij@linaro.org>:
> On Tue, Oct 28, 2014 at 1:02 AM, Dmitry Eremin-Solenikov
> <dbaryshkov@gmail.com> wrote:
>
>> As new locomo driver properly supports SPARSE_IRQ, stop playing with
>> NR_IRQS on sa1100 (locomo was the last chip requiring NR_IRQ tricks).
>>
>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
>
> That's right! By moving to irqdomain things get even better :)

That is a separate topic in my repo. I'll push that after finishing with LoCoMo.
diff mbox

Patch

diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 3790298..99e7202 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -68,22 +68,7 @@ 
 #define IRQ_BOARD_START		49
 #define IRQ_BOARD_END		65
 
-/*
- * Figure out the MAX IRQ number.
- *
- * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically
- * allocate their IRQs above NR_IRQS.
- *
- * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has
- * to be included in the NR_IRQS calculation.
- */
-#ifdef CONFIG_SHARP_LOCOMO
-#define NR_IRQS_LOCOMO		4
-#else
-#define NR_IRQS_LOCOMO		0
-#endif
-
 #ifndef NR_IRQS
-#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
+#define NR_IRQS IRQ_BOARD_START
 #endif
-#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
+#define SA1100_NR_IRQS IRQ_BOARD_START