Show patches with: State = Action Required       |    Archived = No       |   34858 patches
« 1 2 3 4348 349 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v6,5/5] arm64: dts: mediatek: mt7988a-bpi-r4: Add pinctrl subnodes for bpi-r4 Add pinctrl support for mt7988 - - 1 - --- 2024-12-09 Frank Wunderlich New
[v6,4/5] arm64: dts: mediatek: mt7988: Add pinctrl support Add pinctrl support for mt7988 - - 1 - --- 2024-12-09 Frank Wunderlich New
[v6,3/5] dt-bindings: pinctrl: add binding for MT7988 SoC Add pinctrl support for mt7988 - - 1 - --- 2024-12-09 Frank Wunderlich New
[v6,2/5] pinctrl: mediatek: add MT7988 pinctrl driver Add pinctrl support for mt7988 - - 1 - --- 2024-12-09 Frank Wunderlich New
[v6,1/5] pinctrl: mediatek: add support for MTK_PULL_PD_TYPE Add pinctrl support for mt7988 - - 1 - --- 2024-12-09 Frank Wunderlich New
[4/4] gpio: tqmx86: add support for changing GPIO directions gpio-tqmx86: cleanup + changing directions - - - - --- 2024-12-09 Matthias Schiffer New
[3/4] gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper gpio-tqmx86: cleanup + changing directions - - - - --- 2024-12-09 Matthias Schiffer New
[2/4] gpio: tqmx86: consistently refer to IRQs by hwirq numbers gpio-tqmx86: cleanup + changing directions - - - - --- 2024-12-09 Matthias Schiffer New
[1/4] gpio: tqmx86: add macros for interrupt configuration gpio-tqmx86: cleanup + changing directions - - - - --- 2024-12-09 Matthias Schiffer New
pinctrl-tegra: Add config property GPIO mode pinctrl-tegra: Add config property GPIO mode - - - - --- 2024-12-09 Prathamesh Shete New
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking - 1 - - --- 2024-12-09 Evgenii Shatokhin New
pinctrl: bcm63268: Add gpio function pinctrl: bcm63268: Add gpio function - - - - --- 2024-12-07 Kyle Hendry New
[v2] pinctrl: nomadik: Add check for clk_enable() [v2] pinctrl: nomadik: Add check for clk_enable() - 1 - - --- 2024-12-06 Mingwei Zheng New
[v3] pinctrl: stm32: Add check for clk_enable() [v3] pinctrl: stm32: Add check for clk_enable() - 1 - - --- 2024-12-06 Mingwei Zheng New
[v2] pinctrl: stm32: Add check for clk_enable() [v2] pinctrl: stm32: Add check for clk_enable() - 1 - - --- 2024-12-06 Mingwei Zheng New
[v3,13/13] ARM: at91: add new SoC sama7d65 Add support for SAMA7D65 - - 1 - --- 2024-12-06 Ryan Wanner New
[v3,12/13] ARM: configs: at91: sama7: add new SoC config Add support for SAMA7D65 - - 1 - --- 2024-12-06 Ryan Wanner New
[v3,11/13] ARM: dts: microchip: add support for sama7d65_curiosity board Add support for SAMA7D65 - - - - --- 2024-12-06 Ryan Wanner New
[v3,10/13] ARM: dts: at91: Add sama7d65 pinmux Add support for SAMA7D65 - - 1 - --- 2024-12-06 Ryan Wanner New
[v3,09/13] ARM: dts: microchip: add sama7d65 SoC DT Add support for SAMA7D65 - - 1 - --- 2024-12-06 Ryan Wanner New
[v3,08/13] clk: at91: sama7d65: add sama7d65 pmc driver Add support for SAMA7D65 - - 1 - --- 2024-12-06 Ryan Wanner New
[v3,07/13] dt-bindings: clock: Add SAMA7D65 PMC compatible string Add support for SAMA7D65 - - 1 - --- 2024-12-06 Ryan Wanner New
[v3,06/13] dt-bindings: clocks: atmel,at91sam9x5-sckc: add sama7d65 Add support for SAMA7D65 1 - 1 - --- 2024-12-06 Ryan Wanner New
[v3,05/13] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl Add support for SAMA7D65 - - - - --- 2024-12-06 Ryan Wanner New
[v3,04/13] dt-bindings: serial: atmel,at91-usart: add microchip,sama7d65-usart Add support for SAMA7D65 - - - - --- 2024-12-06 Ryan Wanner New
[v3,03/13] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT Add support for SAMA7D65 - - 1 - --- 2024-12-06 Ryan Wanner New
[v3,02/13] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom Add support for SAMA7D65 1 - - - --- 2024-12-06 Ryan Wanner New
[v3,01/13] dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity Add support for SAMA7D65 2 - 1 - --- 2024-12-06 Ryan Wanner New
[v2,2/4] pinctrl: renesas: rzg2l: Add support for RZ/G3E SoC Add RZ/G3E pinctrl support - - - - --- 2024-12-06 Biju Das New
[v2,1/4] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC Add RZ/G3E pinctrl support 1 - - - --- 2024-12-06 Biju Das New
[v2] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev() [v2] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev() - 1 - - --- 2024-12-06 Joe Hattori New
regulator:s5m8767 Fully convert to GPIO descriptors regulator:s5m8767 Fully convert to GPIO descriptors - - - - --- 2024-12-06 Song Chen New
[2/4] pinctrl: renesas: rzg2l: Add support for RZ/G3E SoC Add RZ/G2L pinctrl support - - - - --- 2024-12-05 Biju Das New
[1/4] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC Add RZ/G2L pinctrl support - - - - --- 2024-12-05 Biju Das New
[v1,char-misc-next] misc: microchip: pci1xxxx: Add push-pull drive support for GPIO [v1,char-misc-next] misc: microchip: pci1xxxx: Add push-pull drive support for GPIO - - - - --- 2024-12-05 Rengarajan S New
[v1,char-misc-linus,2/2] misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set co… misc: microchip: pci1xxxx: Resolve kernel panic and return code mismatch issues - 1 - - --- 2024-12-05 Rengarajan S New
[v1,char-misc-linus,1/2] misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling misc: microchip: pci1xxxx: Resolve kernel panic and return code mismatch issues - 1 - - --- 2024-12-05 Rengarajan S New
pinctrl: ingenic: Replace seq_printf() by seq_puts() pinctrl: ingenic: Replace seq_printf() by seq_puts() - - - - --- 2024-12-05 Geert Uytterhoeven New
[v2,2/2] gpio: omap: save two lines by using devm_clk_get_prepared() [v2,1/2] gpio: omap: allow building the module with COMPILE_TEST=y - - 1 - --- 2024-12-05 Bartosz Golaszewski New
[v2,1/2] gpio: omap: allow building the module with COMPILE_TEST=y [v2,1/2] gpio: omap: allow building the module with COMPILE_TEST=y - - 1 - --- 2024-12-05 Bartosz Golaszewski New
pinctrl: stm32: Add check for clk_enable() pinctrl: stm32: Add check for clk_enable() - 1 - - --- 2024-12-05 Mingwei Zheng New
pinctrl: nomadik: Add check for clk_enable() pinctrl: nomadik: Add check for clk_enable() - 1 - - --- 2024-12-05 Mingwei Zheng New
[v3,11/11] usb: typec: class: Remove both cable_match() and partner_match() driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,10/11] cxl/pmem: Remove match_nvdimm_bridge() driver core: Constify API device_find_child() - - 1 - --- 2024-12-05 Zijun Hu New
[v3,09/11] driver core: Introduce an device matching API device_match_type() driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode() driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,07/11] slimbus: core: Simplify of_find_slim_device() implementation driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,06/11] driver core: Remove match_any() driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,05/11] driver core: Simplify API device_find_child_by_name() implementation driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,04/11] driver core: Constify API device_find_child() then adapt for various usages driver core: Constify API device_find_child() - - 2 - --- 2024-12-05 Zijun Hu New
[v3,03/11] bus: fsl-mc: Constify fsl_mc_device_match() driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,02/11] slimbus: core: Constify slim_eaddr_equal() driver core: Constify API device_find_child() - - - - --- 2024-12-05 Zijun Hu New
[v3,01/11] libnvdimm: Simplify nd_namespace_store() implementation driver core: Constify API device_find_child() - - 1 - --- 2024-12-05 Zijun Hu New
gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev() gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev() - 1 1 - --- 2024-12-04 Joe Hattori New
[7/7] gpio: graniterapids: Fix GPIO Ack functionality gpio: Fixes for Granite Rapids vGPIO driver - - - - --- 2024-12-04 Mika Westerberg New
[6/7] gpio: graniterapids: Check if GPIO line can be used for IRQs gpio: Fixes for Granite Rapids vGPIO driver - - - - --- 2024-12-04 Mika Westerberg New
[5/7] gpio: graniterapids: Determine if GPIO pad can be used by driver gpio: Fixes for Granite Rapids vGPIO driver - - - - --- 2024-12-04 Mika Westerberg New
[4/7] gpio: graniterapids: Fix invalid RXEVCFG register bitmask gpio: Fixes for Granite Rapids vGPIO driver - - - - --- 2024-12-04 Mika Westerberg New
[3/7] gpio: graniterapids: Fix invalid GPI_IS register offset gpio: Fixes for Granite Rapids vGPIO driver - - - - --- 2024-12-04 Mika Westerberg New
[2/7] gpio: graniterapids: Fix incorrect BAR assignment gpio: Fixes for Granite Rapids vGPIO driver - - - - --- 2024-12-04 Mika Westerberg New
[1/7] gpio: graniterapids: Fix vGPIO driver crash gpio: Fixes for Granite Rapids vGPIO driver - - - - --- 2024-12-04 Mika Westerberg New
gpio: twl4030: use gpiochip_get_data gpio: twl4030: use gpiochip_get_data - - - - --- 2024-12-03 Rosen Penev New
gpio: idio-16: Actually make use of the GPIO_IDIO_16 symbol namespace gpio: idio-16: Actually make use of the GPIO_IDIO_16 symbol namespace 1 1 - - --- 2024-12-03 Uwe Kleine-König New
[2/2] gpio: omap: save two lines by using devm_clk_get_prepared() [1/2] gpio: omap: allow building the module with COMPILE_TEST=y - - 1 - --- 2024-12-03 Bartosz Golaszewski New
[1/2] gpio: omap: allow building the module with COMPILE_TEST=y [1/2] gpio: omap: allow building the module with COMPILE_TEST=y - - 1 - --- 2024-12-03 Bartosz Golaszewski New
gpio: GPIO_MVEBU should not default to y when compile-testing gpio: GPIO_MVEBU should not default to y when compile-testing - 1 - - --- 2024-12-03 Geert Uytterhoeven New
drivers: gpio: gpio-ljca: Initialize num before accessing item in ljca_gpio_config drivers: gpio: gpio-ljca: Initialize num before accessing item in ljca_gpio_config - 1 - - --- 2024-12-03 Haoyu Li New
v1 pinctrl: mtk-eint: add eint new design for mt8196 v1 pinctrl: mtk-eint: add eint new design for mt8196 - - - - --- 2024-12-03 chang hao New
[v2,11/32] libnvdimm: Simplify nd_namespace_store() implementation driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,10/32] nvdimm: Adapt for constified device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,09/32] pwm: Adapt for constified device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,08/32] net: dsa: Adapt for constified device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,07/32] gpio: sim: Remove gpio_sim_dev_match_fwnode() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,06/32] thunderbolt: Adapt for constified device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,05/32] media: pci: mgb4: Adapt for constified device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,04/32] hwmon: Adapt for constified device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,03/32] drm/mediatek: Adapt for constified device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,02/32] driver core: Introduce device_match_type() to match device with a device type driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[v2,01/32] driver core: Constify API device_find_child() driver core: Constify API device_find_child() and adapt for various existing usages - - - - --- 2024-12-03 Zijun Hu New
[libgpiod] bindings: python: Fix PyDict_Next contiguous [libgpiod] bindings: python: Fix PyDict_Next contiguous - - - - --- 2024-12-02 George Harker New
[libgpiod] bindings: python: Fix PyDict_Next contiguous [libgpiod] bindings: python: Fix PyDict_Next contiguous - - - - --- 2024-12-02 George Harker New
[7/7] arm64: dts: broadcom: Fix device tree errors on BCM2712. drm/vc4: Fixup DT and DT binding issues from recent patchset - 1 - - --- 2024-12-02 Dave Stevenson New
[6/7] arm: dts: broadcom: Add interrupt-controller flag for intc on BCM2711 drm/vc4: Fixup DT and DT binding issues from recent patchset - - - - --- 2024-12-02 Dave Stevenson New
[5/7] arm64: dts: broadcom: Add interrupt-controller flag for intc on BCM2712 drm/vc4: Fixup DT and DT binding issues from recent patchset - - - - --- 2024-12-02 Dave Stevenson New
[4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline drm/vc4: Fixup DT and DT binding issues from recent patchset - 1 - - --- 2024-12-02 Dave Stevenson New
[3/7] dt-bindings: gpio: brcmstb: add gpio-line-name drm/vc4: Fixup DT and DT binding issues from recent patchset - - - - --- 2024-12-02 Dave Stevenson New
[2/7] dtbindings: display: Fix BCM2835 HVS bindings for BCM2712 drm/vc4: Fixup DT and DT binding issues from recent patchset - 1 - - --- 2024-12-02 Dave Stevenson New
[1/7] dtbindings: display: bcm2711-hdmi: Correct bindings for 2712 drm/vc4: Fixup DT and DT binding issues from recent patchset - 1 - - --- 2024-12-02 Dave Stevenson New
[v5,10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers Add support for RaspberryPi RP1 PCI device using a DT overlay - - 1 - --- 2024-12-02 Andrea della Porta New
[v5,09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - - --- 2024-12-02 Andrea della Porta New
[v5,08/10] misc: rp1: RaspberryPi RP1 misc driver Add support for RaspberryPi RP1 PCI device using a DT overlay - - - - --- 2024-12-02 Andrea della Porta New
[v5,07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device Add support for RaspberryPi RP1 PCI device using a DT overlay - - - - --- 2024-12-02 Andrea della Porta New
[v5,06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support Add support for RaspberryPi RP1 PCI device using a DT overlay - - 2 - --- 2024-12-02 Andrea della Porta New
[v5,05/10] clk: rp1: Add support for clocks provided by RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - - --- 2024-12-02 Andrea della Porta New
[v5,04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - - --- 2024-12-02 Andrea della Porta New
[v5,03/10] dt-bindings: pci: Add common schema for devices accessible through PCI BARs Add support for RaspberryPi RP1 PCI device using a DT overlay - - - - --- 2024-12-02 Andrea della Porta New
[v5,02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - 1 - --- 2024-12-02 Andrea della Porta New
[v5,01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - 1 - --- 2024-12-02 Andrea della Porta New
[v5,5/5] arm64: dts: mediatek: mt7988: add pinctrl subnodes for bpi-r4 Add pinctrl support for mt7988 - - 1 - --- 2024-12-02 Frank Wunderlich New
[v5,4/5] arm64: dts: mediatek: mt7988: add pinctrl support Add pinctrl support for mt7988 - - 1 - --- 2024-12-02 Frank Wunderlich New
« 1 2 3 4348 349 »