| Message ID | 20231207070700.4156557-1-claudiu.beznea.uj@bp.renesas.com |
|---|---|
| Headers | show |
| Series | renesas: rzg3s: Add support for Ethernet | expand |
Hello: This series was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Thu, 7 Dec 2023 09:06:49 +0200 you wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Hi, > > Series adds Ethernet support for Renesas RZ/G3S. > Along with it preparatory cleanups and fixes were included. > > [...] Here is the summary with links: - [v2,01/11] clk: renesas: rzg2l-cpg: Check reset monitor registers (no matching commit) - [v2,02/11] clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and ETH1 (no matching commit) - [v2,03/11] pinctrl: renesas: rzg2l: Move arg and index in the main function block (no matching commit) - [v2,04/11] pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups (no matching commit) - [v2,05/11] pinctrl: renesas: rzg2l: Add support to select power source for Ethernet pins (no matching commit) - [v2,06/11] pinctrl: renesas: rzg2l: Add output enable support (no matching commit) - [v2,07/11] pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins (no matching commit) - [v2,08/11] dt-bindings: net: renesas,etheravb: Document RZ/G3S support https://git.kernel.org/netdev/net-next/c/060baa9b90d4 - [v2,09/11] arm64: renesas: r9a08g045: Add the Ethernet nodes (no matching commit) - [v2,10/11] arm64: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities (no matching commit) - [v2,11/11] arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces (no matching commit) You are awesome, thank you!
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Hi, Series adds Ethernet support for Renesas RZ/G3S. Along with it preparatory cleanups and fixes were included. Patches 1-2 are clock specific. Patches 3-7 are pinctrl specific. Patches 8-11 are device tree specific. It is expected that patches will be integrated though Geert's tree. Thank you, Claudiu Beznea Changes in v2: - patches 1/14 and 14/14 from v1 were integrated thus, didn't include them in this version - dropped patch 3/14 "clk: renesas: rzg2l-cpg: Add support for MSTOP" from v1 and associated changes; a follow up will be done on it after the current series will be accepted - addressed review comments - fixed typos in commit title and description - collected tags - removed IEN functinality form patch 6/12 and added it in a separate patch (patch 7/12) - patch 11/14] "arm64: renesas: rzg3s-smarc-som: Invert the logic for SW_SD2_EN macro from" from v1 was replaced by patch 10/11 in this version "arm64: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities" Claudiu Beznea (11): clk: renesas: rzg2l-cpg: Check reset monitor registers clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and ETH1 pinctrl: renesas: rzg2l: Move arg and index in the main function block pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups pinctrl: renesas: rzg2l: Add support to select power source for Ethernet pins pinctrl: renesas: rzg2l: Add output enable support pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins dt-bindings: net: renesas,etheravb: Document RZ/G3S support arm64: renesas: r9a08g045: Add the Ethernet nodes arm64: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces .../bindings/net/renesas,etheravb.yaml | 1 + arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 38 ++++ .../boot/dts/renesas/rzg3s-smarc-som.dtsi | 173 ++++++++++++++++-- drivers/clk/renesas/r9a08g045-cpg.c | 10 + drivers/clk/renesas/rzg2l-cpg.c | 59 ++++-- drivers/pinctrl/renesas/pinctrl-rzg2l.c | 164 +++++++++++++++-- 6 files changed, 398 insertions(+), 47 deletions(-)