| Message ID | 20240429210131.373487-2-eajames@linux.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: aspeed: Add IBM P11 BMC Boards | expand |
On 29/04/2024 23:01, Eddie James wrote: > IBM Power processors have a SPI controller that can be accessed > over FSI from a service processor. Document it. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- This is an automated instruction, just in case, because many review tags are being ignored. If you know the process, you can skip it (please do not feel offended by me posting it here - no bad intentions intended). If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply. https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml b/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml new file mode 100644 index 000000000000..d7fec4c3a801 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/ibm,spi-fsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SPI Controller + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + A SPI controller found on IBM Power processors, accessed over FSI from a + service processor. This node will always be a child node of an ibm,fsi2spi + node. + +properties: + compatible: + enum: + - ibm,spi-fsi + + reg: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - $ref: spi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + fsi { + #address-cells = <1>; + #size-cells = <0>; + + spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + size = <0x80000>; + address-width = <24>; + pagesize = <256>; + spi-max-frequency = <1000000>; + }; + }; + };
IBM Power processors have a SPI controller that can be accessed over FSI from a service processor. Document it. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- Changes since v2: - Change name from ibm,p10-spi to ibm,spi-fsi for two reasons. One, this matches the I2C controller binding (ibm,i2c-fsi), and two, this binding is specifically for the FSI-attached SPI controllers on the P10 but accessed from the service processor. P10 SPI controllers accessed from the P10 would have different bindings. - Fix warnings by using generic FSI parent node - Fix prefix .../devicetree/bindings/spi/ibm,spi-fsi.yaml | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml