diff mbox series

[4/5] fsi: aspeed: Add module param for bus divisor

Message ID 20200728025527.174503-5-joel@jms.id.au
State New
Headers show
Series fsi: Support extra functions on ASPEED master | expand

Commit Message

Joel Stanley July 28, 2020, 2:55 a.m. UTC
For testing and hardware debugging a user may wish to override the
divisor at runtime. By setting fsi_master_aspeed.bus_div=N, the divisor
will be set to N, if 0 < N <= 0x3ff.

This is a module parameter and not a device tree option as it will only
need to be set when testing or debugging.

Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 drivers/fsi/fsi-master-aspeed.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index f503f64ab32b..2531e826ba8b 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -87,6 +87,7 @@  static const u32 fsi_base = 0xa0000000;
 #define FSI_DIVISOR_DEFAULT            1
 #define FSI_DIVISOR_CABLED             2
 static u16 aspeed_fsi_divisor = FSI_DIVISOR_DEFAULT;
+module_param_named(bus_div,aspeed_fsi_divisor, ushort, 0);
 
 #define OPB_POLL_TIMEOUT		10000
 
@@ -454,9 +455,12 @@  static int tacoma_cabled_fsi_fixup(struct device *dev)
 	if (gpio) {
 		/*
 		 * Cable signal integrity means we should run the bus
-		 * slightly slower
+		 * slightly slower. Do not override if a kernel param
+		 * has already overridden.
 		 */
-		aspeed_fsi_divisor = FSI_DIVISOR_CABLED;
+		if (aspeed_fsi_divisor == FSI_DIVISOR_DEFAULT)
+			aspeed_fsi_divisor = FSI_DIVISOR_CABLED;
+
 		gpiod_direction_output(mux_gpio, 0);
 		dev_info(dev, "FSI configured for external cable\n");
 	} else {