diff --git a/ltp/fsx.c b/ltp/fsx.c
index 3709419..9fed5b2 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -95,7 +95,8 @@ int			logcount = 0;	/* total ops */
 #define OP_PUNCH_HOLE		6
 #define OP_ZERO_RANGE		7
 #define OP_COLLAPSE_RANGE	8
-#define OP_MAX_FULL		9
+#define OP_INSERT_RANGE	9
+#define OP_MAX_FULL		10
 
 /* operation modifiers */
 #define OP_CLOSEOPEN	100
@@ -145,6 +146,7 @@ int     fallocate_calls = 1;            /* -F flag disables */
 int     punch_hole_calls = 1;           /* -H flag disables */
 int     zero_range_calls = 1;           /* -z flag disables */
 int	collapse_range_calls = 1;	/* -C flag disables */
+int	insert_range_calls = 1;		/* -i flag disables */
 int 	mapped_reads = 1;		/* -R flag disables it */
 int	fsxgoodfd = 0;
 int	o_direct;			/* -Z */
@@ -339,6 +341,14 @@ logdump(void)
 						     lp->args[0] + lp->args[1])
 				prt("\t******CCCC");
 			break;
+		case OP_INSERT_RANGE:
+			prt("INSERT 0x%x thru 0x%x\t(0x%x bytes)",
+			    lp->args[0], lp->args[0] + lp->args[1] - 1,
+			    lp->args[1]);
+			if (badoff >= lp->args[0] && badoff <
+						     lp->args[0] + lp->args[1])
+				prt("\t******CCCC");
+			break;
 		case OP_SKIPPED:
 			prt("SKIPPED (no operation)");
 			break;
@@ -1012,6 +1022,59 @@ do_collapse_range(unsigned offset, unsigned length)
 }
 #endif
 
+#ifdef FALLOC_FL_INSERT_RANGE
+void
+do_insert_range(unsigned offset, unsigned length)
+{
+	unsigned end_offset;
+	int mode = FALLOC_FL_INSERT_RANGE;
+
+	if (length == 0) {
+		if (!quiet && testcalls > simulatedopcount)
+			prt("skipping zero length insert range\n");
+		log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
+		return;
+	}
+
+	if ((loff_t)offset >= file_size) {
+		if (!quiet && testcalls > simulatedopcount)
+			prt("skipping insert range behind EOF\n");
+		log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
+		return;
+	}
+
+	log4(OP_INSERT_RANGE, offset, length, 0);
+
+	if (testcalls <= simulatedopcount)
+		return;
+
+	end_offset = offset + length;
+	if ((progressinterval && testcalls % progressinterval == 0) ||
+	    (debug && (monitorstart == -1 || monitorend == -1 ||
+		      end_offset <= monitorend))) {
+		prt("%lu insert\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+			offset, offset+length, length);
+	}
+	if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
+		prt("insert range: %x to %x\n", offset, length);
+		prterr("do_insert_range: fallocate");
+		report_failure(161);
+	}
+
+	memmove(good_buf + end_offset, good_buf + offset,
+		file_size - offset);
+	memset(good_buf + offset, '\0', length);
+	file_size += length;
+}
+
+#else
+void
+do_insert_range(unsigned offset, unsigned length)
+{
+	return;
+}
+#endif
+
 #ifdef HAVE_LINUX_FALLOC_H
 /* fallocate is basically a no-op unless extending, then a lot like a truncate */
 void
@@ -1117,14 +1180,25 @@ docloseopen(void)
 	}
 }
 
-#define TRIM_OFF_LEN(off, len, size)	\
-do {					\
-	if (size)			\
-		(off) %= (size);	\
-	else				\
-		(off) = 0;		\
-	if ((off) + (len) > (size))	\
-		(len) = (size) - (off);	\
+
+#define TRIM_OFF(off, size)			\
+do {						\
+	if (size)				\
+		(off) %= (size);		\
+	else					\
+		(off) = 0;			\
+} while (0)
+
+#define TRIM_LEN(off, len, size)		\
+do {						\
+	if ((off) + (len) > (size))		\
+		(len) = (size) - (off);		\
+} while (0)
+
+#define TRIM_OFF_LEN(off, len, size)		\
+do {						\
+	TRIM_OFF(off, size);			\
+	TRIM_LEN(off, len, size);		\
 } while (0)
 
 void
@@ -1192,6 +1266,12 @@ test(void)
 			goto out;
 		}
 		break;
+	case OP_INSERT_RANGE:
+		if (!insert_range_calls) {
+			log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
+			goto out;
+		}
+		break;
 	}
 
 	switch (op) {
@@ -1244,6 +1324,22 @@ test(void)
 		}
 		do_collapse_range(offset, size);
 		break;
+	case OP_INSERT_RANGE:
+		TRIM_OFF(offset, file_size);
+		TRIM_LEN(file_size, size, maxfilelen);
+		offset = offset & ~(block_size - 1);
+		size = size & ~(block_size - 1);
+		if (size == 0) {
+			log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
+			goto out;
+		}
+		if (file_size + size > maxfilelen) {
+			log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
+			goto out;
+		}
+
+		do_insert_range(offset, size);
+		break;
 	default:
 		prterr("test: unknown operation");
 		report_failure(42);
@@ -1307,6 +1403,9 @@ usage(void)
 #ifdef FALLOC_FL_COLLAPSE_RANGE
 "	-C: Do not use collapse range calls\n"
 #endif
+#ifdef FALLOC_FL_INSERT_RANGE
+"	-i: Do not use insert range calls\n"
+#endif
 "	-L: fsxLite - no file creations & no file size changes\n\
 	-N numops: total # operations to do (default infinity)\n\
 	-O: use oplen (see -o flag) for every op (default random)\n\
@@ -1493,7 +1592,7 @@ main(int argc, char **argv)
 
 	setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
 
-	while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHzCLN:OP:RS:WZ"))
+	while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHzCiLN:OP:RS:WZ"))
 	       != EOF)
 		switch (ch) {
 		case 'b':
@@ -1599,6 +1698,9 @@ main(int argc, char **argv)
 		case 'C':
 			collapse_range_calls = 0;
 			break;
+		case 'i':
+			insert_range_calls = 0;
+			break;
 		case 'L':
 		        lite = 1;
 			break;
@@ -1758,6 +1860,8 @@ main(int argc, char **argv)
 		zero_range_calls = test_fallocate(FALLOC_FL_ZERO_RANGE);
 	if (collapse_range_calls)
 		collapse_range_calls = test_fallocate(FALLOC_FL_COLLAPSE_RANGE);
+	if (insert_range_calls)
+		insert_range_calls = test_fallocate(FALLOC_FL_INSERT_RANGE);
 
 	while (numops == -1 || numops--)
 		test();
