diff mbox

build mount.smb2 from mount.cifs

Message ID 20100511092454.1a99c3d9@corrin.poochiereds.net
State New
Headers show

Commit Message

Jeff Layton May 11, 2010, 1:24 p.m. UTC
On Fri, 7 May 2010 12:29:22 -0500
Steve French <smfrench@gmail.com> wrote:

> Resending with updates from Jeff Layton comments included.
> 
> On Fri, May 7, 2010 at 12:26 PM, Steve French <smfrench@gmail.com> wrote:
> > mount.smb2 has different help (many fewer mount options) and different
> > fsname, but otherwise can reuse all of the good work Jeff did on
> > mount.cifs.  This patch allow mount.cifs to detect if run as
> > mount.smb2 (to display different help and fsname).
> 
> 
> 

Looks good overall. A couple of small whitespace and formatting issues.
Does the attached patch look ok? Eventually we'll probably want to have
"make install" add a mount.smb2 symlink, but we probably shouldn't do
that until the filesystem is in mainline kernels.

Comments

Steve French May 11, 2010, 3:24 p.m. UTC | #1
On Tue, May 11, 2010 at 8:24 AM, Jeff Layton <jlayton@redhat.com> wrote:
> On Fri, 7 May 2010 12:29:22 -0500
> Steve French <smfrench@gmail.com> wrote:
>
>> Resending with updates from Jeff Layton comments included.
>>
>> On Fri, May 7, 2010 at 12:26 PM, Steve French <smfrench@gmail.com> wrote:
>> > mount.smb2 has different help (many fewer mount options) and different
>> > fsname, but otherwise can reuse all of the good work Jeff did on
>> > mount.cifs.  This patch allow mount.cifs to detect if run as
>> > mount.smb2 (to display different help and fsname).
>>
>>
>>
>
> Looks good overall. A couple of small whitespace and formatting issues.
> Does the attached patch look ok? Eventually we'll probably want to have
> "make install" add a mount.smb2 symlink, but we probably shouldn't do
> that until the filesystem is in mainline kernels.

Jeff,
Your updates  to mount.cifs patch look fine to me, and I agree that
we can wait on updating make install (to do the symlink)
until the file system is in mainline.

On the kernel code, at the moment I am working on fixing a readdir bug
(one of the locking calls is failing right after SMB2 close on the
directory handle),
and adding the minimal required support for async and SMB2 compounding.
After talking with jra yesterday, realized that the smb2 kernel code wasn't
checking for async and compound responses but that this is required
(and now that the Samba server's SMB2 support is improving rapidly
we are far more likely to see async responses when a server
side command has to block even briefly), so have been updating
the code which validates the header e.g.
Jeff Layton May 14, 2010, 7:39 p.m. UTC | #2
On Tue, 11 May 2010 10:24:32 -0500
Steve French <smfrench@gmail.com> wrote:

> On Tue, May 11, 2010 at 8:24 AM, Jeff Layton <jlayton@redhat.com> wrote:
> > On Fri, 7 May 2010 12:29:22 -0500
> > Steve French <smfrench@gmail.com> wrote:
> >
> >> Resending with updates from Jeff Layton comments included.
> >>
> >> On Fri, May 7, 2010 at 12:26 PM, Steve French <smfrench@gmail.com> wrote:
> >> > mount.smb2 has different help (many fewer mount options) and different
> >> > fsname, but otherwise can reuse all of the good work Jeff did on
> >> > mount.cifs.  This patch allow mount.cifs to detect if run as
> >> > mount.smb2 (to display different help and fsname).
> >>
> >>
> >>
> >
> > Looks good overall. A couple of small whitespace and formatting issues.
> > Does the attached patch look ok? Eventually we'll probably want to have
> > "make install" add a mount.smb2 symlink, but we probably shouldn't do
> > that until the filesystem is in mainline kernels.
> 
> Jeff,
> Your updates  to mount.cifs patch look fine to me, and I agree that
> we can wait on updating make install (to do the symlink)
> until the file system is in mainline.
> 
> On the kernel code, at the moment I am working on fixing a readdir bug
> (one of the locking calls is failing right after SMB2 close on the
> directory handle),
> and adding the minimal required support for async and SMB2 compounding.
> After talking with jra yesterday, realized that the smb2 kernel code wasn't
> checking for async and compound responses but that this is required
> (and now that the Samba server's SMB2 support is improving rapidly
> we are far more likely to see async responses when a server
> side command has to block even briefly), so have been updating
> the code which validates the header e.g.
> 
> 

Committed...
diff mbox

Patch

From 970efd4ed4d05566da5d3250d020f9e49725b247 Mon Sep 17 00:00:00 2001
From: Steve French <smfrench@gmail.com>
Date: Tue, 11 May 2010 09:18:25 -0400
Subject: [PATCH] mount.cifs: turn into a multicall binary for smb2

mount.smb2 has different help (many fewer mount options) and different
fsname, but otherwise can reuse all of the good work Jeff did on
mount.cifs.  This patch allow mount.cifs to detect if run as mount.smb2
(to display different help and fsname).

Signed-off-by: Steve French <smfrench@gmail.com>
---
 mount.cifs.c |   83 +++++++++++++++++++++++++++++++++++++++++++++++----------
 1 files changed, 68 insertions(+), 15 deletions(-)

diff --git a/mount.cifs.c b/mount.cifs.c
index c4eb59a..96c60cb 100644
--- a/mount.cifs.c
+++ b/mount.cifs.c
@@ -1,6 +1,6 @@ 
 /*
  * Mount helper utility for Linux CIFS VFS (virtual filesystem) client
- * Copyright (C) 2003,2008 Steve French  (sfrench@us.ibm.com)
+ * Copyright (C) 2003,2010 Steve French  (sfrench@us.ibm.com)
  * Copyright (C) 2008 Jeremy Allison (jra@samba.org)
  * Copyright (C) 2010 Jeff Layton (jlayton@samba.org)
  *
@@ -149,6 +149,7 @@  struct parsed_mount_info {
 
 const char *thisprogram;
 const char *cifs_fstype = "cifs";
+const char *smb2_fstype = "smb2";
 
 static int parse_unc(const char *unc_name, struct parsed_mount_info *parsed_info);
 
@@ -257,6 +258,52 @@  static int mount_cifs_usage(FILE * stream)
 	return 0;
 }
 
+static int mount_smb2_usage(FILE *stream)
+{
+	fprintf(stream, "\nUsage:  %s <remotetarget> <dir> -o <options>\n",
+		thisprogram);
+	fprintf(stream, "\nMount the remote target, specified as a UNC name,");
+	fprintf(stream, " to a local directory.\n\nOptions:\n");
+	fprintf(stream, "\tuser=<arg>\n\tpass=<arg>\n\tdom=<arg>\n");
+	fprintf(stream, "\nLess commonly used options:");
+	fprintf(stream,
+		"\n\tcredentials=<filename>,guest,perm,noperm,rw,ro,");
+	fprintf(stream,
+		"\n\tsep=<char>,iocharset=<codepage>,exec,noexec");
+	fprintf(stream,
+		"\n\tnolock,directio,sec=<authentication mechanism>,sign");
+	fprintf(stream,
+		"\n\tuid=<uid>,gid=<gid>,dir_mode=<mode>,file_mode=<mode>");
+	fprintf(stream, "\n\nRarely used options:");
+	fprintf(stream,
+		"\n\tport=<tcpport>,rsize=<size>,wsize=<size>,unc=<unc_name>,ip=<ip_address>,");
+	fprintf(stream,
+		"\n\tdev,nodev,hard,soft,intr,");
+	fprintf(stream,
+		"\n\tnointr,ignorecase,noacl,prefixpath=<path>,nobrl");
+	fprintf(stream,
+		"\n\nOptions are described in more detail in the manual page");
+	fprintf(stream, "\n\tman 8 mount.smb2\n");
+	fprintf(stream, "\nTo display the version number of the mount helper:");
+	fprintf(stream, "\n\tmount.smb2 -V\n");
+
+	if (stream == stderr)
+		return EX_USAGE;
+	return 0;
+}
+
+static int mount_usage(FILE *stream)
+{
+	int rc;
+
+	if (strcmp(thisprogram, "mount.smb2") == 0)
+		rc = mount_smb2_usage(stream);
+	else
+		rc = mount_cifs_usage(stream);
+
+	return rc;
+}
+
 /*
  * CIFS has to "escape" commas in the password field so that they don't
  * end up getting confused for option delimiters. Copy password into pw
@@ -1283,7 +1330,7 @@  static int check_mtab(const char *progname, const char *devname,
 }
 
 static int
-add_mtab(char *devname, char *mountpoint, unsigned long flags)
+add_mtab(char *devname, char *mountpoint, unsigned long flags, const char *fstype)
 {
 	int rc = 0;
 	uid_t uid;
@@ -1342,7 +1389,7 @@  add_mtab(char *devname, char *mountpoint, unsigned long flags)
 
 	mountent.mnt_fsname = devname;
 	mountent.mnt_dir = mountpoint;
-	mountent.mnt_type = (char *)(void *)cifs_fstype;
+	mountent.mnt_type = (char *)(void *)fstype;
 	mountent.mnt_opts = (char *)calloc(MTAB_OPTIONS_LEN, 1);
 	if (mountent.mnt_opts) {
 		if (flags & MS_RDONLY)
@@ -1529,6 +1576,7 @@  int main(int argc, char **argv)
 	size_t dev_len;
 	struct parsed_mount_info *parsed_info = NULL;
 	pid_t pid;
+	const char *fstype;
 
 	rc = check_setuid();
 	if (rc)
@@ -1543,11 +1591,11 @@  int main(int argc, char **argv)
 	   textdomain(PACKAGE); */
 
 	if (!argc || !argv) {
-		rc = mount_cifs_usage(stderr);
+		rc = mount_usage(stderr);
 		goto mount_exit;
 	}
 
-	thisprogram = argv[0];
+	thisprogram = basename(argv[0]);
 	if (thisprogram == NULL)
 		thisprogram = "mount.cifs";
 
@@ -1569,7 +1617,7 @@  int main(int argc, char **argv)
 		switch (c) {
 		case '?':
 		case 'h':	/* help */
-			rc = mount_cifs_usage(stdout);
+			rc = mount_usage(stdout);
 			goto mount_exit;
 		case 'n':
 			++parsed_info->nomtab;
@@ -1598,13 +1646,13 @@  int main(int argc, char **argv)
 			break;
 		default:
 			fprintf(stderr, "unknown command-line option: %c\n", c);
-			rc = mount_cifs_usage(stderr);
+			rc = mount_usage(stderr);
 			goto mount_exit;
 		}
 	}
 
 	if (argc < 3 || argv[optind] == NULL || argv[optind + 1] == NULL) {
-		rc = mount_cifs_usage(stderr);
+		rc = mount_usage(stderr);
 		goto mount_exit;
 	}
 
@@ -1721,8 +1769,8 @@  mount_retry:
 	}
 
 	if (parsed_info->verboseflag)
-		fprintf(stderr, "mount.cifs kernel mount options: %s",
-			options);
+		fprintf(stderr, "%s kernel mount options: %s",
+			thisprogram, options);
 
 	if (parsed_info->got_password) {
 		/*
@@ -1742,8 +1790,13 @@  mount_retry:
 	if (rc)
 		goto mount_exit;
 
+	if (strcmp(thisprogram, "mount.smb2") == 0)
+		fstype = smb2_fstype;
+	else
+		fstype = cifs_fstype;
+
 	if (!parsed_info->fakemnt
-	    && mount(dev_name, ".", cifs_fstype, parsed_info->flags, options)) {
+	    && mount(dev_name, ".", fstype, parsed_info->flags, options)) {
 		switch (errno) {
 		case ECONNREFUSED:
 		case EHOSTUNREACH:
@@ -1756,7 +1809,7 @@  mount_retry:
 			goto mount_retry;
 		case ENODEV:
 			fprintf(stderr,
-				"mount error: cifs filesystem not supported by the system\n");
+				"mount error: %s filesystem not supported by the system\n", fstype);
 			break;
 		case ENXIO:
 			if (!already_uppercased &&
@@ -1772,14 +1825,14 @@  mount_retry:
 		fprintf(stderr, "mount error(%d): %s\n", errno,
 			strerror(errno));
 		fprintf(stderr,
-			"Refer to the mount.cifs(8) manual page (e.g. man "
-			"mount.cifs)\n");
+			"Refer to the %s(8) manual page (e.g. man "
+			"%s)\n", thisprogram, thisprogram);
 		rc = EX_FAIL;
 		goto mount_exit;
 	}
 
 	if (!parsed_info->nomtab)
-		rc = add_mtab(dev_name, mountpoint, parsed_info->flags);
+		rc = add_mtab(dev_name, mountpoint, parsed_info->flags, fstype);
 
 mount_exit:
 	if (parsed_info) {
-- 
1.6.6.1