diff mbox series

[v6,2/2] ARM: dts: aspeed: Harma: Add Facebook Harma (AST2600) BMC

Message ID 20231206155316.4181813-3-peteryin.openbmc@gmail.com
State New
Headers show
Series Add Facebook Harma (AST2600) BMC | expand

Commit Message

Chia Hsing Yin Dec. 6, 2023, 3:53 p.m. UTC 
Add linux device tree entry related to
Harma specific devices connected to BMC SoC.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 607 ++++++++++++++++++
 2 files changed, 608 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts

Comments

Joel Stanley Dec. 7, 2023, 12:10 a.m. UTC | #1 
On Thu, 7 Dec 2023 at 02:25, Peter Yin <peteryin.openbmc@gmail.com> wrote:
>
> Add linux device tree entry related to
> Harma specific devices connected to BMC SoC.

This isn't a very helpful commit message. Convention is to mention
what the system is to give context; eg "The SuperCorp Machine1
multi-node server system uses an AST2600 BMC".

> +&mac3 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rmii4_default>;
> +       no-hw-checksum;
> +       use-ncsi;
> +       ncsi-ctrl,start-redo-probe;
> +       ncsi-ctrl,no-channel-monitor;
> +       mlx,multi-host;
> +       ncsi-package = <1>;
> +       ncsi-channel = <1>;
> +       ncsi-rexmit = <1>;
> +       ncsi-timeout = <2>;

These properties are not supported by the kernel. It seems Facebook
uses them in their machines, it would be great if you contributed
support for them to mainline.

If not, please drop the properties.

> +
> +&gpio0 {
> +       pinctrl-names = "default";
> +       gpio-line-names =
> +       /*A0-A7*/       "","","","","","","","",
> +       /*B0-B7*/       "","","","",
> +                       "FM_BMC_MUX_CS_SPI_SEL_0","FM_ID_LED_N","","",
> +       /*C0-C7*/       "","","","","","","","",
> +       /*D0-D7*/       "","","SOL_UART_SET","","","","","",
> +       /*E0-E7*/       "","","","","","","","",
> +       /*F0-F7*/       "","","","","","","","",
> +       /*G0-G7*/       "","","","","","","","",
> +       /*H0-H7*/       "","","","","","","","",
> +       /*I0-I7*/       "","","","","","","","",
> +       /*J0-J7*/       "","","","","","","","",
> +       /*K0-K7*/       "","","","","","","","",
> +       /*L0-L7*/       "","","","","","","","",
> +       /*M0-M7*/       "","","","","","","","",
> +       /*N0-N7*/       "LED_POSTCODE_0","LED_POSTCODE_1",
> +                       "LED_POSTCODE_2","LED_POSTCODE_3",
> +                       "LED_POSTCODE_4","LED_POSTCODE_5",
> +                       "LED_POSTCODE_6","LED_POSTCODE_7",
> +       /*O0-O7*/       "","","","","","","","",
> +       /*P0-P7*/       "FP_SYS_PWRBTN_IN_N","BMC_SYS_PWRBTN_OUT_N",

Is this machine going to run openbmc?

We have a set of documented properties for GPIOs such as the power button:

https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md

If you intentionally do not want to follow this scheme, please mention
why in your commit message.

Cheers,

Joel
Krzysztof Kozlowski Dec. 9, 2023, 10:39 a.m. UTC | #2 
On 06/12/2023 16:53, Peter Yin wrote:
> Add linux device tree entry related to
> Harma specific devices connected to BMC SoC.
> 
> Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
> ---

...

> +&mac3 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_rmii4_default>;
> +	no-hw-checksum;
> +	use-ncsi;
> +	ncsi-ctrl,start-redo-probe;
> +	ncsi-ctrl,no-channel-monitor;
> +	mlx,multi-host;

There is no such property. Please stop copying downstream code into
upstream.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 23cbc7203a8e3..92ba3208d2a27 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,6 +19,7 @@  dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-fuji.dtb \
 	aspeed-bmc-facebook-galaxy100.dtb \
 	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-harma.dtb \
 	aspeed-bmc-facebook-minipack.dtb \
 	aspeed-bmc-facebook-tiogapass.dtb \
 	aspeed-bmc-facebook-wedge40.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 0000000000000..85a3607fc4b19
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -0,0 +1,607 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Harma";
+	compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart6;
+		serial2 = &uart2;
+		serial4 = &uart5;
+
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+// MTIA
+&uart6 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+	virtual;
+	port=<0x3e8>;
+	sirq = <7>;
+	sirq-polarity = <0>;
+	dma-mode;
+	dma-channel = <12>;
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	mlx,multi-host;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	max31790@30{
+		compatible = "max31790";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp75@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	max31790@30{
+		compatible = "max31790";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			//Retimer Flash
+			eeprom@50 {
+				compatible = "atmel,24c2048";
+				reg = <0x50>;
+				pagesize = <128>;
+			};
+		};
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	// PDB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	delta_brick@69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux22: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		imux23: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+	// PTTV FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			//MB FRU
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// To Debug card
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","",
+			"FM_BMC_MUX_CS_SPI_SEL_0","FM_ID_LED_N","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","SOL_UART_SET","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"FP_SYS_PWRBTN_IN_N","BMC_SYS_PWRBTN_OUT_N",
+			"FP_RST_BTN_IN_N","","POWER_LED","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","ENABLE_ID_LED_GATE","",
+	/*V0-V7*/	"","","","","BAT_DETECT","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	max-ngpios = <128>;
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"FM_SCM_CABLE_PRSNT_N","FM_PWRDIS_E1S_0",
+	"FM_EXP_AUX_PWR_EN","",
+	"FM_EXP_MAIN_PWR_EN","FM_PWRDIS_E1S_1",
+	"PWRGD_EXP_PWR","",
+	/*A4-A7 line 8-15*/
+	"PWRGD_P12V_MEM","FM_MODULE_PWR_EN",
+	"PWRGD_P3V3_STBY","FM_HOST_PWRGD",
+	"PWRGD_P1V8","FM_CRD_PWRGD_L",
+	"FM_PRSNT_CPU_N","FM_SMI_ACTIVE_N",
+	/*B0-B3 line 16-23*/
+	"FM_PVDD33_S5_EN","BMC_CPU_NMI_N",
+	"RGD_PVDD33_S5","NMI_SYNC_FLOOD_N",
+	"FM_PVDD18_S5_EN","",
+	"PWRGD_PVDD18_S5","",
+	/*B4-B7 line 24-31*/
+	"PWRGD_SB_STBY_PWROK","FM_CPU_SP5R1",
+	"RST_RSMRST_PLD_N","FM_CPU_SP5R2",
+	"SYS_SCM_PWRBTN_N","FM_CPU_SP5R3",
+	"SYS_PWRBTN_N","FM_CPU_SP5R4",
+	/*C0-C3 line 32-39*/
+	"FM_SLPS5_PLD_N","FM_CPU0_SA0",
+	"FM_SLPS3_PLD_N","FM_CPU0_SA1",
+	"FM_PVDD11_S3_EN","FM_RT_CPU0_P0_LVS_EN",
+	"PWRGD_CHGK","FM_RT_CPU0_P1_LVS_EN",
+	/*C4-C7 line 40-47*/
+	"PWRGD_CHAE","FM_SMB_RT_ROM_P0_SEL",
+	"PWRGD_PVDD11_S3","FM_SMB_RT_ROM_P1_SEL",
+	"PVDDCR_CPU0_EN","FM_I3C_CPU_MUX0_OE_N",
+	"PWRGD_PVDDCR_CPU0","FM_I3C_CPU_MUX0_SEL",
+	/*D0-D3 line 48-55*/
+	"PVDDCR_CPU1_EN","FM_I3C_CPU_MUX1_OE_N",
+	"PWRGD_PVDDCR_CPU1","FM_I3C_CPU_MUX1_SEL",
+	"PVDDCR_SOC_EN","RST_BMC_N",
+	"PWRGD_PVDDCR_SOC","RST_MUX_CPU0_P0_N",
+	/*D4-D7 line 56-63*/
+	"PVDDIO_EN","RST_MUX_CPU0_P1_N",
+	"PWRGD_PVDDIO","RST_MUX_E1S_N",
+	"PLD_SYS_POWER_GOOD","RST_MUX_MB_N",
+	"FM_CPU_PWR_GOOD","RST_SMB_E1S_0_N",
+	/*E0-E3 line 64-71*/
+	"FM_PWRGD_CPU_PWROK","RST_SMB_E1S_1_N",
+	"PLD_BIOS_POST_CMPLT_N","RST_SRST_CPLD_SCM_N",
+	"FM_PRSNT_E1S_0_N","RST_USB_HUB_R_N",
+	"FM_E1S_0_EN","BMC_RST_BTN_OUT_N",
+	/*E4-E7 line 72-79*/
+	"FM_PRSNT_E1S_1_N","RST_CPU_KBRST_N",
+	"FM_E1S_1_EN","RST_PLTRST_SCM_N",
+	"FM_P0V9_RT_EN1","BMC_JTAG_MUX_SEL_0",
+	"PWRGD_P0V9_RT1","BMC_JTAG_MUX_SEL_1",
+	/*F0-F3 line 80-87*/
+	"FM_P0V9_RT_EN2","BMC_JTAG_SEL",
+	"PWRGD_P0V9_RT2","BMC_READY_N",
+	"FM_P1V8_CPU1_RT_EN","BMC_SGPIO_READY",
+	"PWRGD_P1V8_CPU1_RT","FM_RT_CPU0_P0_LVS_EN_FORCE",
+	/*F4-F7 line 88-95*/
+	"FM_MODULES_0_PRSNT1_N","FM_RT_CPU0_P1_LVS_EN_FORCE",
+	"FM_MODULES_1_PRSNT1_N","FM_BIOS_MRC_DEBUG_MSG_DIS",
+	"FM_PWRGD_MODULE","UART_BUF_SEL",
+	"FM_CMM_PRS_L","AC_ON_OFF_BTN_CPLD_N",
+	/*G0-G3 line 96-103*/
+	"FM_CPU_CORETYPE2","",
+	"FM_CPU_CORETYPE1","",
+	"FM_CPU_CORETYPE0","",
+	"FM_BOARD_REV_ID5","",
+	/*G4-G7 line 104-111*/
+	"FM_BOARD_REV_ID4","",
+	"FM_BOARD_REV_ID3","",
+	"FM_BOARD_REV_ID2","",
+	"FM_BOARD_REV_ID1","",
+	/*H0-H3 line 112-119*/
+	"FM_BOARD_REV_ID0","",
+	"FM_FAN_0_PWRGD_L","",
+	"FM_FAN_1_PWRGD_L","",
+	"FM_UART_SCM_BUF_0_EN","",
+	/*H4-H7 line 120-127*/
+	"FM_UART_SCM_BUF_1_EN","",
+	"FM_EXP_PRSNT3_N","",
+	"FM_EXP_PRSNT2_N","",
+	"FM_EXP_PRSNT1_N","",
+	/*I0-I3 line 128-135*/
+	"FM_EXP_PRSNT0_N","",
+	"FM_EXP_SLOT_ID1","",
+	"FM_EXP_SLOT_ID0","",
+	"FM_FORCE_POWERON_N","",
+	/*I4-I7 line 136-143*/
+	"FM_P5V_USB_SW_EN_N","",
+	"FM_JTAG_SCM_SEL","",
+	"FM_RST_CPU_RESET_N","",
+	"FM_SOL_UART_CH_SEL","",
+	/*J0-J3 line 144-151*/
+	"RST_MB_STBY_SCM_N","",
+	"","",
+	"RST_PCIE_MODULES_PERST0","",
+	"RST_ROT_CPU","",
+	/*J4-J7 line 152-159*/
+	"SLOT_ID_BCB_0","",
+	"SLOT_ID_BCB_1","",
+	"SLOT_ID_BCB_2","",
+	"SLOT_ID_BCB_3","",
+	/*K0-K3 line 160-167*/
+	"FM_RT_CPU0_P0_LVS_EN_R","",
+	"FM_RT_CPU0_P1_LVS_EN_R","",
+	"","","","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","","",
+	/*L0-L3 line 176-183*/
+	"","","","","","","","",
+	/*L4-L7 line 184-191*/
+	"","","","","","","","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"","","","","","","","",
+	/*N4-N7 line 216-223*/
+	"","","","","","","","",
+	/*O0-O3 line 224-231*/
+	"","","","","","","","",
+	/*O4-O7 line 232-239*/
+	"","","","","","","","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+};