diff mbox series

ARM: dts: aspeed: Drop wrong and inconsistent "sdhci" compatible

Message ID 20210608220247.2237139-1-sudeep.holla@arm.com
State New
Headers show
Series ARM: dts: aspeed: Drop wrong and inconsistent "sdhci" compatible | expand

Commit Message

Sudeep Holla June 8, 2021, 10:02 p.m. UTC
As per mmc/aspeed,sdhci.yaml, "sdhci" is not a valid compatible. In fact,
it is not documented at all(including old txt bindings). Also it is
pretty inconsistent within the same dtsi. Once instance of controller
refers to it while the other doesn't.

Fix it by dropping the wrong "sdhci" compatible.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Andrew Jeffery June 8, 2021, 11:43 p.m. UTC | #1
On Wed, 9 Jun 2021, at 07:32, Sudeep Holla wrote:
> As per mmc/aspeed,sdhci.yaml, "sdhci" is not a valid compatible. In fact,
> it is not documented at all(including old txt bindings). Also it is
> pretty inconsistent within the same dtsi. Once instance of controller
> refers to it while the other doesn't.
> 
> Fix it by dropping the wrong "sdhci" compatible.
> 
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

No idea what happened there. Thanks for the cleanup.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..3488e8ba9df8 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -541,7 +541,7 @@  sdc: sdc@1e740000 {
 				status = "disabled";
 
 				sdhci0: sdhci@1e740100 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x100 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -550,7 +550,7 @@  sdhci0: sdhci@1e740100 {
 				};
 
 				sdhci1: sdhci@1e740200 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x200 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;