[v2,2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC

Add initial version of device tree file for Facebook Backpack CMM
(Chasis Management Module) ast2500 BMC.

Note: I2C devices on Backpack Line Cards and Fabric Cards are not
listed in the device tree file because Line/Fabric Cards may be
unplugged.

Signed-off-by: Tao Ren <taoren@fb.com>
---
 Changes since v1:
  - including "aspeed-bmc-facebook-cmm.dtb" in Makefile.

 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts | 317 ++++++++++++++++++
 2 files changed, 318 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts

Hi Tao,

On Tue, 6 Nov 2018, at 14:58, Tao Ren wrote:
> Add initial version of device tree file for Facebook Backpack CMM
> (Chasis Management Module) ast2500 BMC.
> 
> Note: I2C devices on Backpack Line Cards and Fabric Cards are not
> listed in the device tree file because Line/Fabric Cards may be
> unplugged.
> 
> Signed-off-by: Tao Ren <taoren@fb.com>
> ---
>  Changes since v1:
>   - including "aspeed-bmc-facebook-cmm.dtb" in Makefile.
> 
>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts | 317 ++++++++++++++++++
>  2 files changed, 318 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a7c313bfe490..2239e6a30d7a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1200,6 +1200,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-ast2500-evb.dtb \
>  	aspeed-bmc-arm-centriq2400-rep.dtb \
>  	aspeed-bmc-arm-stardragon4800-rep2.dtb \
> +	aspeed-bmc-facebook-cmm.dtb \
>  	aspeed-bmc-facebook-tiogapass.dtb \
>  	aspeed-bmc-intel-s2600wf.dtb \
>  	aspeed-bmc-opp-lanyang.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/
> boot/dts/aspeed-bmc-facebook-cmm.dts
> new file mode 100644
> index 000000000000..a259d8a2426a
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2018 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +
> +/ {
> +	model = "Facebook Backpack CMM BMC";
> +	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
> +
> +	aliases {
> +		/*
> +		 * Override the default uart aliases to avoid breaking
> +		 * the legacy applications.
> +		 */
> +		serial0 = &uart5;
> +		serial1 = &uart1;
> +		serial2 = &uart3;
> +		serial3 = &uart4;
> +
> +		/*
> +		 * Hardcode the bus number of i2c switches' channels to
> +		 * avoid breaking the legacy applications.
> +		 */
> +		i2c16 = &imux16;
> +		i2c17 = &imux17;
> +		i2c18 = &imux18;
> +		i2c19 = &imux19;
> +		i2c20 = &imux20;
> +		i2c21 = &imux21;
> +		i2c22 = &imux22;
> +		i2c23 = &imux23;
> +		i2c24 = &imux24;
> +		i2c25 = &imux25;
> +		i2c26 = &imux26;
> +		i2c27 = &imux27;
> +		i2c28 = &imux28;
> +		i2c29 = &imux29;
> +		i2c30 = &imux30;
> +		i2c31 = &imux31;
> +		i2c32 = &imux32;
> +		i2c33 = &imux33;
> +		i2c34 = &imux34;
> +		i2c35 = &imux35;
> +		i2c36 = &imux36;
> +		i2c37 = &imux37;
> +		i2c38 = &imux38;
> +		i2c39 = &imux39;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart1;
> +		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
> +	};
> +
> +	memory@80000000 {
> +		reg = <0x80000000 0x20000000>;
> +	};
> +};
> +
> +/*
> + * Update reset type to "system" (full chip) to fix warm reboot hang 
> issue
> + * when reset type is set to default ("soc", gated by reset mask 
> registers).
> + */
> +&wdt1 {
> +	status = "okay";
> +	aspeed,reset-type = "system";
> +};
> +
> +/*
> + * wdt2 is not used by Backpack CMM.
> + */
> +&wdt2 {
> +	status = "disabled";
> +};
> +
> +&fmc {
> +	status = "okay";
> +	flash@0 {
> +		status = "okay";
> +		m25p,fast-read;
> +		label = "bmc";
> +#include "facebook-bmc-flash-layout.dtsi"
> +	};
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	status = "okay";
> +};

UARTs 1-4 should be explicitly pinmuxed. It's a bit fiddly as each of the UART lines has its own mux configuration, but it at least allows some flexibility (i.e. whether you just want Rx/Tx, or something more). See e.g. the uart1 node in arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts.

Speaking of pinctrl, as it's an AST2500 system you'll probably want to add the following to ensure you have full control of the pinmux configuration:

&pinctrl {
	aspeed,external-nodes = <&gfx &lhc>;
};

> +
> +&uart5 {
> +	status = "okay";
> +};

UART5 has fixed pins, so no pinctrl necessary here.

> +
> +&mac1 {
> +	status = "okay";
> +	no-hw-checksum;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +
> +	i2c-switch@77 {
> +		compatible = "nxp,pca9548";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <0x77>;
> +
> +		imux16: i2c@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +		};
> +
> +		imux17: i2c@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +		};
> +
> +		imux18: i2c@2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <2>;
> +		};
> +
> +		imux19: i2c@3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <3>;
> +		};
> +
> +		imux20: i2c@4 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <4>;
> +		};
> +
> +		imux21: i2c@5 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <5>;
> +		};
> +
> +		imux22: i2c@6 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <6>;
> +		};
> +
> +		imux23: i2c@7 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <7>;
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	i2c-switch@71 {
> +		compatible = "nxp,pca9548";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <0x71>;
> +
> +		imux24: i2c@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +		};
> +
> +		imux25: i2c@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +		};
> +
> +		imux26: i2c@2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <2>;
> +		};
> +
> +		imux27: i2c@3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <3>;
> +		};
> +
> +		imux28: i2c@4 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <4>;
> +		};
> +
> +		imux29: i2c@5 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <5>;
> +		};
> +
> +		imux30: i2c@6 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <6>;
> +		};
> +
> +		imux31: i2c@7 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <7>;
> +		};
> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	status = "okay";
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +};
> +
> +&i2c6 {
> +	status = "okay";
> +};
> +
> +&i2c7 {
> +	status = "okay";
> +};
> +
> +&i2c8 {
> +	status = "okay";
> +
> +	i2c-switch@77 {
> +		compatible = "nxp,pca9548";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <0x77>;
> +
> +		imux32: i2c@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +		};
> +
> +		imux33: i2c@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +		};
> +
> +		imux34: i2c@2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <2>;
> +		};
> +
> +		imux35: i2c@3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <3>;
> +		};
> +
> +		imux36: i2c@4 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <4>;
> +		};
> +
> +		imux37: i2c@5 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <5>;
> +		};
> +
> +		imux38: i2c@6 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <6>;
> +		};
> +
> +		imux39: i2c@7 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <7>;
> +		};
> +	};
> +};
> +
> +&i2c13 {
> +	status = "okay";
> +};

You said this in the commit message:

> Note: I2C devices on Backpack Line Cards and Fabric Cards are not
> listed in the device tree file because Line/Fabric Cards may be
> unplugged.

It's not clear to me what this actually means, and I'm trying to reconcile it with enabling all of the i2c buses as I'm curious as to whether that's necessary.

Cheers,

Andrew

> +
> +&adc {
> +	status = "okay";
> +};
> -- 
> 2.17.1
>