From patchwork Fri Dec 15 06:24:39 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Joel Stanley X-Patchwork-Id: 848993 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from lists.ozlabs.org (lists.ozlabs.org [IPv6:2401:3900:2:1::3]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 3yygTX1FCfz9t2M for ; Fri, 15 Dec 2017 17:27:44 +1100 (AEDT) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="MC/AQNiv"; dkim-atps=neutral Received: from lists.ozlabs.org (lists.ozlabs.org [IPv6:2401:3900:2:1::3]) by lists.ozlabs.org (Postfix) with ESMTP id 3yygTW6tgKzDrn8 for ; Fri, 15 Dec 2017 17:27:43 +1100 (AEDT) Authentication-Results: lists.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="MC/AQNiv"; dkim-atps=neutral X-Original-To: linux-aspeed@lists.ozlabs.org Delivered-To: linux-aspeed@lists.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (mailfrom) smtp.mailfrom=gmail.com (client-ip=2607:f8b0:400e:c00::241; helo=mail-pf0-x241.google.com; envelope-from=joel.stan@gmail.com; receiver=) Authentication-Results: lists.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="MC/AQNiv"; dkim-atps=neutral Received: from mail-pf0-x241.google.com (mail-pf0-x241.google.com [IPv6:2607:f8b0:400e:c00::241]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 3yygTR0l2HzDrhL for ; Fri, 15 Dec 2017 17:27:39 +1100 (AEDT) Received: by mail-pf0-x241.google.com with SMTP id e3so5484811pfi.10 for ; Thu, 14 Dec 2017 22:27:38 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=sender:from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=ymLpVVGO4DBWH0ddd/oiyRgQcxTlcnVXzKdqFp32Nrc=; b=MC/AQNivsH+pHmoRfgFPHaviAt8U+Act2ljMAtpwr/oh0ghzhYVgyAkrrHWZbYDT7m rXxgogGKFksqq58pGmCu2R53Y7YiYiRLzYHw3uOJw7TwYDvG19w9HabaKIVYhuNIdP8U fJvvzKHVp9kCBsPSFdRiC8Je5Hmq8KH7BYuRCr/fCX2IfGrzdCKGUtjBFLye+Y42oPP6 NaFR/sMv8E4mwNt+yrJJB6AIwDXgDfJYfP8QLlyIhwlq4Zy/0+zaEwGJ61vpSJiC4RR1 ysl/SubHYXZkJ2nJ9Op7dKevFC0HYuZZVB6uyXqi6alhv4y8RZZZtgvHjGJqCaEA09Av vJXg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id :in-reply-to:references:mime-version:content-transfer-encoding; bh=ymLpVVGO4DBWH0ddd/oiyRgQcxTlcnVXzKdqFp32Nrc=; b=j9tyaTc0kROB0718kUCugC5PnILPKwcbJbFRXiTwd2r4Dfn653v2k2RUtU7735ZjNO qALFAldRd9VER5lcbt1HjmzzOo9ubAjbdNmGPqw/emmUT8gMXwE9OMwzOGqFM5m1vv/L T6w9NDbSCdjYaOWc69BEk+wH6HsQ/Br+snchpqVCZzOJYZi0+C2PLqA8JmpUPH0tToLk sqptqcFSyPq4PhKRe7S+aYdxC/oyqVKrYhSjH469FUwX/DgNDrXxnU5KLmoEosNcHlZt p0sltzVGw6RAWNf/X2yfcx179hoDeQSjSXdC9yYdCPS5h4M1kbLDJOerWP8Acav6MIag woUw== X-Gm-Message-State: AKGB3mLwfM7uX1FQdciJKnYCsa01iwPQmg+4azHiViK6GE/aXdYXBgL1 I8LNFQQePPJ0CKrjOQrIseU= X-Google-Smtp-Source: ACJfBovYytQAlCxv2aLub35nQYKnJaFwHrkltZfBZCMOmBX7WEouPRy6dBjdlb9GRUKMEgVFnLPurQ== X-Received: by 10.101.65.129 with SMTP id a1mr10951682pgq.203.1513319257058; Thu, 14 Dec 2017 22:27:37 -0800 (PST) Received: from aurora.jms.id.au ([203.0.153.9]) by smtp.gmail.com with ESMTPSA id v64sm10446757pfi.187.2017.12.14.22.27.29 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Thu, 14 Dec 2017 22:27:35 -0800 (PST) Received: by aurora.jms.id.au (sSMTP sendmail emulation); Fri, 15 Dec 2017 16:57:26 +1030 From: Joel Stanley To: Rob Herring , Mark Rutland , Arnd Bergmann , Andrew Jeffery , Patrick Venture , Xo Wang , Lei YU Subject: [PATCH v2 15/19] ARM: dts: aspeed: Add Witherspoon BMC machine Date: Fri, 15 Dec 2017 16:54:39 +1030 Message-Id: <20171215062443.23059-16-joel@jms.id.au> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20171215062443.23059-1-joel@jms.id.au> References: <20171215062443.23059-1-joel@jms.id.au> MIME-Version: 1.0 X-BeenThere: linux-aspeed@lists.ozlabs.org X-Mailman-Version: 2.1.24 Precedence: list List-Id: Linux ASPEED SoC development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Matt Spinler , devicetree@vger.kernel.org, linux-aspeed@lists.ozlabs.org, Benjamin Herrenschmidt , linux-kernel@vger.kernel.org, Brad Bishop , "Edward A . James" , linux-arm-kernel@lists.infradead.org, Jeremy Kerr Errors-To: linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "Linux-aspeed" The Witherspoon BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server. This adds the device tree description for most upstream components. It is a squashed commit from the OpenBMC kernel tree. Signed-off-by: Brandon Wyman Signed-off-by: Matt Spinler Signed-off-by: Brad Bishop Signed-off-by: Edward A. James Signed-off-by: Cédric Le Goater Signed-off-by: Andrew Jeffery Reviewed-by: Brandon Wyman Signed-off-by: Joel Stanley --- v2: Add Brandon's reviewed-by tag --- arch/arm/boot/dts/Makefile | 4 +- arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 547 +++++++++++++++++++++++ 2 files changed, 550 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5d1e9d37bf3a..15a9207319c1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1104,5 +1104,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-opp-palmetto.dtb \ - aspeed-bmc-opp-romulus.dtb + aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-witherspoon.dtb + endif diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts new file mode 100644 index 000000000000..9a0937512e5b --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -0,0 +1,547 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include + +/ { + model = "Witherspoon BMC"; + compatible = "ibm,witherspoon-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + }; + + power-button { + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + + iio-hwmon-bmp280 { + compatible = "iio-hwmon"; + io-channels = <&bmp 1>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; + + flash@1 { + status = "okay"; + label = "alt"; + m25p,fast-read; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + /* MUX + * -> PCIe Slot 3 + * -> PCIe Slot 4 + */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +};