| Message ID | 20170627021214.23323-2-andrew@aj.id.au |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Tue, 2017-06-27 at 11:42 +0930, Andrew Jeffery wrote: > The AST2400 contains several USB controllers: > > * USB 1.1 Host Controller > * USB 2.0 Host Controller > * Combined USB 2.0 Virtual Hub and USB 1.1 HID Controller There's also a USB1.1 HID-only device-controller, but it's a legacy piece of IP that we may never support. It might be worth mentioning its existence and Ryan might want it supported in the bindings at least no ? > Pins for three ports are routed to the three controllers such that: > > * Port 1 is a dedicated USB 1.1 host port > * Port 2 is shared between the USB 1.1 host and HID controllers > * Port 3 is shared between the USB 2.0 host and Hub controllers > > As the pins for port 1 are fixed function there is no associated mux > function or group described in the bindings. Ports 2 and 3 are muxed as > above, and the table below describes the mapping between pinmux function > names and ports: > > Port | USB Version | USB Mode | Mux Function > ------|--------------|-----------|------------- > 1 | 1.1 | Host | - > 2 | 1.1 | Host | USB11H2 > 2 | 1.1 | Device | USB11D1 > 3 | 2.0 | Host | USB2H1 > 3 | 2.0 | Device | USB2D1 > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > --- > Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt > index ca01710ee29a..09142dab47db 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt > @@ -69,8 +69,9 @@ PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 > ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK > SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ > SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 > -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS > -VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2 > +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1 > +USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 > +WDTRST2 > > aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: >
On Tue, Jun 27, 2017 at 11:42:11AM +0930, Andrew Jeffery wrote: > The AST2400 contains several USB controllers: > > * USB 1.1 Host Controller > * USB 2.0 Host Controller > * Combined USB 2.0 Virtual Hub and USB 1.1 HID Controller > > Pins for three ports are routed to the three controllers such that: > > * Port 1 is a dedicated USB 1.1 host port > * Port 2 is shared between the USB 1.1 host and HID controllers > * Port 3 is shared between the USB 2.0 host and Hub controllers > > As the pins for port 1 are fixed function there is no associated mux > function or group described in the bindings. Ports 2 and 3 are muxed as > above, and the table below describes the mapping between pinmux function > names and ports: > > Port | USB Version | USB Mode | Mux Function > ------|--------------|-----------|------------- > 1 | 1.1 | Host | - > 2 | 1.1 | Host | USB11H2 > 2 | 1.1 | Device | USB11D1 > 3 | 2.0 | Host | USB2H1 > 3 | 2.0 | Device | USB2D1 > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > --- > Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) Acked-by: Rob Herring <robh@kernel.org>
On Mon, 2017-06-26 at 22:53 -0500, Benjamin Herrenschmidt wrote: > On Tue, 2017-06-27 at 11:42 +0930, Andrew Jeffery wrote: > > The AST2400 contains several USB controllers: > > > > * USB 1.1 Host Controller > > * USB 2.0 Host Controller > > * Combined USB 2.0 Virtual Hub and USB 1.1 HID Controller > > There's also a USB1.1 HID-only device-controller, but it's a legacy > piece of IP that we may never support. Yes, I'll fix that - there's a block diagram in the datasheet that suggests they're combined, but the memory map says otherwise. I'll separate them out in the commit message. > It might be worth mentioning its > existence and Ryan might want it supported in the bindings at least no > ? Unless I've missed something this just amounts to a change in the commit message, both above to split the Hub/HID description and below in the table to say "HID" instead of just "Device". The bindings as they stand in this patch completely describe the mux behaviour for USB as documented in the datasheet's Multifunction Pins Mapping and Control table. > > > Pins for three ports are routed to the three controllers such that: > > > > * Port 1 is a dedicated USB 1.1 host port > > * Port 2 is shared between the USB 1.1 host and HID controllers > > * Port 3 is shared between the USB 2.0 host and Hub controllers > > > > As the pins for port 1 are fixed function there is no associated mux > > function or group described in the bindings. Ports 2 and 3 are muxed as > > above, and the table below describes the mapping between pinmux function > > names and ports: > > > > Port | USB Version | USB Mode | Mux Function > > ------|--------------|-----------|------------- > > 1 | 1.1 | Host | - > > 2 | 1.1 | Host | USB11H2 > > 2 | 1.1 | Device | USB11D1 ^~~~~~ Should be "HID" for clarity Cheers, Andrew > > 3 | 2.0 | Host | USB2H1 > > 3 | 2.0 | Device | USB2D1 > > > > > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > > --- > > Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 5 +++-- > > 1 file changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt > > index ca01710ee29a..09142dab47db 100644 > > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt > > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt > > @@ -69,8 +69,9 @@ PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 > > ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK > > SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ > > SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 > > -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS > > -VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2 > > +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1 > > +USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 > > +WDTRST2 > > > > aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: > >
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt index ca01710ee29a..09142dab47db 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt @@ -69,8 +69,9 @@ PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS -VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2 +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1 +USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 +WDTRST2 aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
The AST2400 contains several USB controllers: * USB 1.1 Host Controller * USB 2.0 Host Controller * Combined USB 2.0 Virtual Hub and USB 1.1 HID Controller Pins for three ports are routed to the three controllers such that: * Port 1 is a dedicated USB 1.1 host port * Port 2 is shared between the USB 1.1 host and HID controllers * Port 3 is shared between the USB 2.0 host and Hub controllers As the pins for port 1 are fixed function there is no associated mux function or group described in the bindings. Ports 2 and 3 are muxed as above, and the table below describes the mapping between pinmux function names and ports: Port | USB Version | USB Mode | Mux Function ------|--------------|-----------|------------- 1 | 1.1 | Host | - 2 | 1.1 | Host | USB11H2 2 | 1.1 | Device | USB11D1 3 | 2.0 | Host | USB2H1 3 | 2.0 | Device | USB2D1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> --- Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)