diff mbox series

[linux,dev-4.10,2/2] ipmi: add the KCS nodes into ASt2500 device tree

Message ID 1512743499-26590-2-git-send-email-haiyue.wang@linux.intel.com
State Not Applicable, archived
Headers show
Series None | expand

Commit Message

Haiyue Wang Dec. 8, 2017, 2:31 p.m. UTC 
Add kcs1, kcs2, kcs3 into mfd node 'lpc-bmc@0', and
add kcs4 into mfd node 'lpc-host@80'.

Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
---
 arch/arm/boot/dts/aspeed-g5.dtsi | 42 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index ba3607c..f428491 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -135,8 +135,39 @@ 
 			ranges = <0x0 0x1e789000 0x1000>;
 
 			lpc_bmc: lpc-bmc@0 {
-				compatible = "aspeed,ast2500-lpc-bmc";
+				compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
 				reg = <0x0 0x80>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x80>;
+
+				kcs1: kcs1@0 {
+					compatible = "aspeed,ast2500-kcs-bmc";
+					reg = <0x0 0x80>;
+					interrupts = <8>;
+					kcs_chan = <1>;
+					kcs_addr = <0x0>;
+					status = "disabled";
+				};
+
+				kcs2: kcs2@0 {
+					compatible = "aspeed,ast2500-kcs-bmc";
+					reg = <0x0 0x80>;
+					interrupts = <8>;
+					kcs_chan = <2>;
+					kcs_addr = <0x0>;
+					status = "disabled";
+				};
+
+				kcs3: kcs3@0 {
+					compatible = "aspeed,ast2500-kcs-bmc";
+					reg = <0x0 0x80>;
+					interrupts = <8>;
+					kcs_chan = <3>;
+					kcs_addr = <0x0>;
+					status = "disabled";
+				};
 			};
 
 			lpc_host: lpc-host@80 {
@@ -148,6 +179,15 @@ 
 				#size-cells = <1>;
 				ranges = <0x0 0x80 0x1e0>;
 
+				kcs4: kcs4@0 {
+					compatible = "aspeed,ast2500-kcs-bmc";
+					reg = <0x0 0xa0>;
+					interrupts = <8>;
+					kcs_chan = <4>;
+					kcs_addr = <0x0>;
+					status = "disabled";
+				};
+
 				lpc_ctrl: lpc-ctrl@0 {
 					compatible = "aspeed,ast2500-lpc-ctrl";
 					reg = <0x0 0x80>;