diff mbox series

[v3,1/9] KVM: PPC: Ultravisor: Add PPC_UV config option

Message ID 20190606173614.32090-2-cclaudio@linux.ibm.com
State Superseded
Headers show
Series kvmppc: Paravirtualize KVM to support ultravisor | expand

Commit Message

Claudio Carvalho June 6, 2019, 5:36 p.m. UTC 
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>

CONFIG_PPC_UV adds support for ultravisor.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[Update config help and commit message]
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
---
 arch/powerpc/Kconfig | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Leonardo Bras June 7, 2019, 8:11 p.m. UTC | #1 
On Thu, 2019-06-06 at 14:36 -0300, Claudio Carvalho wrote:
> From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
> 
> CONFIG_PPC_UV adds support for ultravisor.
> 
> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
> Signed-off-by: Ram Pai <linuxram@us.ibm.com>
> [Update config help and commit message]
> Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
> ---
>  arch/powerpc/Kconfig | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 8c1c636308c8..276c1857c335 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -439,6 +439,26 @@ config PPC_TRANSACTIONAL_MEM
>         ---help---
>           Support user-mode Transactional Memory on POWERPC.
> 
> +config PPC_UV
> +	bool "Ultravisor support"
> +	depends on KVM_BOOK3S_HV_POSSIBLE
> +	select HMM_MIRROR
> +	select HMM
> +	select ZONE_DEVICE
> +	select MIGRATE_VMA_HELPER
> +	select DEV_PAGEMAP_OPS
> +	select DEVICE_PRIVATE
> +	select MEMORY_HOTPLUG
> +	select MEMORY_HOTREMOVE
> +	default n
> +	help
> +	  This option paravirtualizes the kernel to run in POWER platforms that
> +	  supports the Protected Execution Facility (PEF). In such platforms,
> +	  the ultravisor firmware runs at a privilege level above the
> +	  hypervisor.
> +
> +	  If unsure, say "N".
> +
>  config LD_HEAD_STUB_CATCH
>  	bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
>  	depends on PPC64

Maybe this patch should be the last of the series, as it may cause some
bisect trouble to have this option enabled while missing some of the
patches.
Claudio Carvalho June 10, 2019, 12:18 p.m. UTC | #2 
On 6/7/19 5:11 PM, Leonardo Bras wrote:
>
> On Thu, 2019-06-06 at 14:36 -0300, Claudio Carvalho wrote:
>> From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
>>
>> CONFIG_PPC_UV adds support for ultravisor.
>>
>> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
>> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
>> Signed-off-by: Ram Pai <linuxram@us.ibm.com>
>> [Update config help and commit message]
>> Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
>> ---
>>  arch/powerpc/Kconfig | 20 ++++++++++++++++++++
>>  1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>> index 8c1c636308c8..276c1857c335 100644
>> --- a/arch/powerpc/Kconfig
>> +++ b/arch/powerpc/Kconfig
>> @@ -439,6 +439,26 @@ config PPC_TRANSACTIONAL_MEM
>>         ---help---
>>           Support user-mode Transactional Memory on POWERPC.
>>
>> +config PPC_UV
>> +	bool "Ultravisor support"
>> +	depends on KVM_BOOK3S_HV_POSSIBLE
>> +	select HMM_MIRROR
>> +	select HMM
>> +	select ZONE_DEVICE
>> +	select MIGRATE_VMA_HELPER
>> +	select DEV_PAGEMAP_OPS
>> +	select DEVICE_PRIVATE
>> +	select MEMORY_HOTPLUG
>> +	select MEMORY_HOTREMOVE
>> +	default n
>> +	help
>> +	  This option paravirtualizes the kernel to run in POWER platforms that
>> +	  supports the Protected Execution Facility (PEF). In such platforms,
>> +	  the ultravisor firmware runs at a privilege level above the
>> +	  hypervisor.
>> +
>> +	  If unsure, say "N".
>> +
>>  config LD_HEAD_STUB_CATCH
>>  	bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
>>  	depends on PPC64
> Maybe this patch should be the last of the series, as it may cause some
> bisect trouble to have this option enabled while missing some of the
> patches.

Thanks Leonardo. I changed that for the next version.

Claudio
diff mbox series

Patch

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8c1c636308c8..276c1857c335 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -439,6 +439,26 @@  config PPC_TRANSACTIONAL_MEM
        ---help---
          Support user-mode Transactional Memory on POWERPC.
 
+config PPC_UV
+	bool "Ultravisor support"
+	depends on KVM_BOOK3S_HV_POSSIBLE
+	select HMM_MIRROR
+	select HMM
+	select ZONE_DEVICE
+	select MIGRATE_VMA_HELPER
+	select DEV_PAGEMAP_OPS
+	select DEVICE_PRIVATE
+	select MEMORY_HOTPLUG
+	select MEMORY_HOTREMOVE
+	default n
+	help
+	  This option paravirtualizes the kernel to run in POWER platforms that
+	  supports the Protected Execution Facility (PEF). In such platforms,
+	  the ultravisor firmware runs at a privilege level above the
+	  hypervisor.
+
+	  If unsure, say "N".
+
 config LD_HEAD_STUB_CATCH
 	bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
 	depends on PPC64