| Message ID | 1594996707-3727-12-git-send-email-atrajeev@linux.vnet.ibm.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | powerpc/perf: Add support for power10 PMU Hardware | expand |
On Fri, Jul 17, 2020 at 10:38:23AM -0400, Athira Rajeev wrote: > PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). > > BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) > bit, namely "BHRB Recording Disable (BHRBRD)". This field controls > whether BHRB entries are written when BHRB recording is enabled by other > bits. This patch implements support for this BHRB disable bit. > > By setting 0b1 to this bit will disable the BHRB and by setting 0b0 > to this bit will have BHRB enabled. This addresses backward > compatibility (for older OS), since this bit will be cleared and > hardware will be writing to BHRB by default. > > This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 > ( there by the core will run faster) and enable this feature only on > runtime ie, on explicit need from user. Also save/restore MMCRA in the > restore path of state-loss idle state to make sure we keep BHRB disabled > if it was not enabled on request at runtime. > > Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> For arch/powerpc/platforms/powernv/idle.c Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> > --- > arch/powerpc/perf/core-book3s.c | 20 ++++++++++++++++---- > arch/powerpc/perf/isa207-common.c | 12 ++++++++++++ > arch/powerpc/platforms/powernv/idle.c | 22 ++++++++++++++++++++-- > 3 files changed, 48 insertions(+), 6 deletions(-) [..snip..] > diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c > index 2dd4673..1c9d0a9 100644 > --- a/arch/powerpc/platforms/powernv/idle.c > +++ b/arch/powerpc/platforms/powernv/idle.c > @@ -611,6 +611,7 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > unsigned long srr1; > unsigned long pls; > unsigned long mmcr0 = 0; > + unsigned long mmcra = 0; > struct p9_sprs sprs = {}; /* avoid false used-uninitialised */ > bool sprs_saved = false; > > @@ -657,6 +658,21 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > */ > mmcr0 = mfspr(SPRN_MMCR0); > } > + > + if (cpu_has_feature(CPU_FTR_ARCH_31)) { > + /* > + * POWER10 uses MMCRA (BHRBRD) as BHRB disable bit. > + * If the user hasn't asked for the BHRB to be > + * written, the value of MMCRA[BHRBRD] is 1. > + * On wakeup from stop, MMCRA[BHRBD] will be 0, > + * since it is previleged resource and will be lost. > + * Thus, if we do not save and restore the MMCRA[BHRBD], > + * hardware will be needlessly writing to the BHRB > + * in problem mode. > + */ > + mmcra = mfspr(SPRN_MMCRA); > + } > + > if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) { > sprs.lpcr = mfspr(SPRN_LPCR); > sprs.hfscr = mfspr(SPRN_HFSCR); > @@ -700,8 +716,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > WARN_ON_ONCE(mfmsr() & (MSR_IR|MSR_DR)); > > if ((srr1 & SRR1_WAKESTATE) != SRR1_WS_NOLOSS) { > - unsigned long mmcra; > - > /* > * We don't need an isync after the mtsprs here because the > * upcoming mtmsrd is execution synchronizing. > @@ -721,6 +735,10 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > mtspr(SPRN_MMCR0, mmcr0); > } > > + /* Reload MMCRA to restore BHRB disable bit for POWER10 */ > + if (cpu_has_feature(CPU_FTR_ARCH_31)) > + mtspr(SPRN_MMCRA, mmcra); > + > /* > * DD2.2 and earlier need to set then clear bit 60 in MMCRA > * to ensure the PMU starts running. > -- > 1.8.3.1 >
On Sat, Jul 18, 2020 at 1:26 AM Athira Rajeev <atrajeev@linux.vnet.ibm.com> wrote: > > PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). > > BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) > bit, namely "BHRB Recording Disable (BHRBRD)". This field controls > whether BHRB entries are written when BHRB recording is enabled by other > bits. This patch implements support for this BHRB disable bit. > > By setting 0b1 to this bit will disable the BHRB and by setting 0b0 > to this bit will have BHRB enabled. This addresses backward > compatibility (for older OS), since this bit will be cleared and > hardware will be writing to BHRB by default. > > This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 > ( there by the core will run faster) and enable this feature only on > runtime ie, on explicit need from user. Also save/restore MMCRA in the > restore path of state-loss idle state to make sure we keep BHRB disabled > if it was not enabled on request at runtime. > > Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> > --- > arch/powerpc/perf/core-book3s.c | 20 ++++++++++++++++---- > arch/powerpc/perf/isa207-common.c | 12 ++++++++++++ > arch/powerpc/platforms/powernv/idle.c | 22 ++++++++++++++++++++-- > 3 files changed, 48 insertions(+), 6 deletions(-) > > diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c > index bd125fe..31c0535 100644 > --- a/arch/powerpc/perf/core-book3s.c > +++ b/arch/powerpc/perf/core-book3s.c > @@ -1218,7 +1218,7 @@ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0) > static void power_pmu_disable(struct pmu *pmu) > { > struct cpu_hw_events *cpuhw; > - unsigned long flags, mmcr0, val; > + unsigned long flags, mmcr0, val, mmcra; > > if (!ppmu) > return; > @@ -1251,12 +1251,24 @@ static void power_pmu_disable(struct pmu *pmu) > mb(); > isync(); > > + val = mmcra = cpuhw->mmcr.mmcra; > + > /* > * Disable instruction sampling if it was enabled > */ > - if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) { > - mtspr(SPRN_MMCRA, > - cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE); > + if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) > + val &= ~MMCRA_SAMPLE_ENABLE; > + > + /* Disable BHRB via mmcra (BHRBRD) for p10 */ > + if (ppmu->flags & PPMU_ARCH_310S) > + val |= MMCRA_BHRB_DISABLE; > + > + /* > + * Write SPRN_MMCRA if mmcra has either disabled > + * instruction sampling or BHRB. > + */ > + if (val != mmcra) { > + mtspr(SPRN_MMCRA, mmcra); > mb(); > isync(); > } > diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c > index 77643f3..964437a 100644 > --- a/arch/powerpc/perf/isa207-common.c > +++ b/arch/powerpc/perf/isa207-common.c > @@ -404,6 +404,13 @@ int isa207_compute_mmcr(u64 event[], int n_ev, > > mmcra = mmcr1 = mmcr2 = mmcr3 = 0; > > + /* > + * Disable bhrb unless explicitly requested > + * by setting MMCRA (BHRBRD) bit. > + */ > + if (cpu_has_feature(CPU_FTR_ARCH_31)) > + mmcra |= MMCRA_BHRB_DISABLE; > + > /* Second pass: assign PMCs, set all MMCR1 fields */ > for (i = 0; i < n_ev; ++i) { > pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK; > @@ -479,6 +486,11 @@ int isa207_compute_mmcr(u64 event[], int n_ev, > mmcra |= val << MMCRA_IFM_SHIFT; > } > > + /* set MMCRA (BHRBRD) to 0 if there is user request for BHRB */ > + if (cpu_has_feature(CPU_FTR_ARCH_31) && > + (has_branch_stack(pevents[i]) || (event[i] & EVENT_WANTS_BHRB))) > + mmcra &= ~MMCRA_BHRB_DISABLE; > + > if (pevents[i]->attr.exclude_user) > mmcr2 |= MMCR2_FCP(pmc); > > diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c > index 2dd4673..1c9d0a9 100644 > --- a/arch/powerpc/platforms/powernv/idle.c > +++ b/arch/powerpc/platforms/powernv/idle.c > @@ -611,6 +611,7 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > unsigned long srr1; > unsigned long pls; > unsigned long mmcr0 = 0; > + unsigned long mmcra = 0; > struct p9_sprs sprs = {}; /* avoid false used-uninitialised */ > bool sprs_saved = false; > > @@ -657,6 +658,21 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > */ > mmcr0 = mfspr(SPRN_MMCR0); > } > + > + if (cpu_has_feature(CPU_FTR_ARCH_31)) { > + /* > + * POWER10 uses MMCRA (BHRBRD) as BHRB disable bit. > + * If the user hasn't asked for the BHRB to be > + * written, the value of MMCRA[BHRBRD] is 1. > + * On wakeup from stop, MMCRA[BHRBD] will be 0, > + * since it is previleged resource and will be lost. > + * Thus, if we do not save and restore the MMCRA[BHRBD], > + * hardware will be needlessly writing to the BHRB > + * in problem mode. > + */ > + mmcra = mfspr(SPRN_MMCRA); If the only thing that needs to happen is set MMCRA[BHRBRD], why save the MMCRA? > + } > + > if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) { > sprs.lpcr = mfspr(SPRN_LPCR); > sprs.hfscr = mfspr(SPRN_HFSCR); > @@ -700,8 +716,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > WARN_ON_ONCE(mfmsr() & (MSR_IR|MSR_DR)); > > if ((srr1 & SRR1_WAKESTATE) != SRR1_WS_NOLOSS) { > - unsigned long mmcra; > - > /* > * We don't need an isync after the mtsprs here because the > * upcoming mtmsrd is execution synchronizing. > @@ -721,6 +735,10 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > mtspr(SPRN_MMCR0, mmcr0); > } > > + /* Reload MMCRA to restore BHRB disable bit for POWER10 */ > + if (cpu_has_feature(CPU_FTR_ARCH_31)) > + mtspr(SPRN_MMCRA, mmcra); > + > /* > * DD2.2 and earlier need to set then clear bit 60 in MMCRA > * to ensure the PMU starts running. Just below here we have: mmcra = mfspr(SPRN_MMCRA); mmcra |= PPC_BIT(60); mtspr(SPRN_MMCRA, mmcra); mmcra &= ~PPC_BIT(60); mtspr(SPRN_MMCRA, mmcra); It seems MMCRA[BHRBRD] could just be OR'd in someway similar to this for ISA v3.1? > -- > 1.8.3.1 >
On Thu, Jul 23, 2020 at 11:26 AM Jordan Niethe <jniethe5@gmail.com> wrote: > > On Sat, Jul 18, 2020 at 1:26 AM Athira Rajeev > <atrajeev@linux.vnet.ibm.com> wrote: > > > > PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). > > > > BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) > > bit, namely "BHRB Recording Disable (BHRBRD)". This field controls > > whether BHRB entries are written when BHRB recording is enabled by other > > bits. This patch implements support for this BHRB disable bit. > > > > By setting 0b1 to this bit will disable the BHRB and by setting 0b0 > > to this bit will have BHRB enabled. This addresses backward > > compatibility (for older OS), since this bit will be cleared and > > hardware will be writing to BHRB by default. > > > > This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 > > ( there by the core will run faster) and enable this feature only on > > runtime ie, on explicit need from user. Also save/restore MMCRA in the > > restore path of state-loss idle state to make sure we keep BHRB disabled > > if it was not enabled on request at runtime. > > > > Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> > > --- > > arch/powerpc/perf/core-book3s.c | 20 ++++++++++++++++---- > > arch/powerpc/perf/isa207-common.c | 12 ++++++++++++ > > arch/powerpc/platforms/powernv/idle.c | 22 ++++++++++++++++++++-- > > 3 files changed, 48 insertions(+), 6 deletions(-) > > > > diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c > > index bd125fe..31c0535 100644 > > --- a/arch/powerpc/perf/core-book3s.c > > +++ b/arch/powerpc/perf/core-book3s.c > > @@ -1218,7 +1218,7 @@ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0) > > static void power_pmu_disable(struct pmu *pmu) > > { > > struct cpu_hw_events *cpuhw; > > - unsigned long flags, mmcr0, val; > > + unsigned long flags, mmcr0, val, mmcra; > > > > if (!ppmu) > > return; > > @@ -1251,12 +1251,24 @@ static void power_pmu_disable(struct pmu *pmu) > > mb(); > > isync(); > > > > + val = mmcra = cpuhw->mmcr.mmcra; > > + > > /* > > * Disable instruction sampling if it was enabled > > */ > > - if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) { > > - mtspr(SPRN_MMCRA, > > - cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE); > > + if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) > > + val &= ~MMCRA_SAMPLE_ENABLE; > > + > > + /* Disable BHRB via mmcra (BHRBRD) for p10 */ > > + if (ppmu->flags & PPMU_ARCH_310S) > > + val |= MMCRA_BHRB_DISABLE; > > + > > + /* > > + * Write SPRN_MMCRA if mmcra has either disabled > > + * instruction sampling or BHRB. > > + */ > > + if (val != mmcra) { > > + mtspr(SPRN_MMCRA, mmcra); > > mb(); > > isync(); > > } > > diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c > > index 77643f3..964437a 100644 > > --- a/arch/powerpc/perf/isa207-common.c > > +++ b/arch/powerpc/perf/isa207-common.c > > @@ -404,6 +404,13 @@ int isa207_compute_mmcr(u64 event[], int n_ev, > > > > mmcra = mmcr1 = mmcr2 = mmcr3 = 0; > > > > + /* > > + * Disable bhrb unless explicitly requested > > + * by setting MMCRA (BHRBRD) bit. > > + */ > > + if (cpu_has_feature(CPU_FTR_ARCH_31)) > > + mmcra |= MMCRA_BHRB_DISABLE; > > + > > /* Second pass: assign PMCs, set all MMCR1 fields */ > > for (i = 0; i < n_ev; ++i) { > > pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK; > > @@ -479,6 +486,11 @@ int isa207_compute_mmcr(u64 event[], int n_ev, > > mmcra |= val << MMCRA_IFM_SHIFT; > > } > > > > + /* set MMCRA (BHRBRD) to 0 if there is user request for BHRB */ > > + if (cpu_has_feature(CPU_FTR_ARCH_31) && > > + (has_branch_stack(pevents[i]) || (event[i] & EVENT_WANTS_BHRB))) > > + mmcra &= ~MMCRA_BHRB_DISABLE; > > + > > if (pevents[i]->attr.exclude_user) > > mmcr2 |= MMCR2_FCP(pmc); > > > > diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c > > index 2dd4673..1c9d0a9 100644 > > --- a/arch/powerpc/platforms/powernv/idle.c > > +++ b/arch/powerpc/platforms/powernv/idle.c > > @@ -611,6 +611,7 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > > unsigned long srr1; > > unsigned long pls; > > unsigned long mmcr0 = 0; > > + unsigned long mmcra = 0; > > struct p9_sprs sprs = {}; /* avoid false used-uninitialised */ > > bool sprs_saved = false; > > > > @@ -657,6 +658,21 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > > */ > > mmcr0 = mfspr(SPRN_MMCR0); > > } > > + > > + if (cpu_has_feature(CPU_FTR_ARCH_31)) { > > + /* > > + * POWER10 uses MMCRA (BHRBRD) as BHRB disable bit. > > + * If the user hasn't asked for the BHRB to be > > + * written, the value of MMCRA[BHRBRD] is 1. > > + * On wakeup from stop, MMCRA[BHRBD] will be 0, > > + * since it is previleged resource and will be lost. > > + * Thus, if we do not save and restore the MMCRA[BHRBD], > > + * hardware will be needlessly writing to the BHRB > > + * in problem mode. > > + */ > > + mmcra = mfspr(SPRN_MMCRA); > If the only thing that needs to happen is set MMCRA[BHRBRD], why save the MMCRA? > > + } > > + > > if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) { > > sprs.lpcr = mfspr(SPRN_LPCR); > > sprs.hfscr = mfspr(SPRN_HFSCR); > > @@ -700,8 +716,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > > WARN_ON_ONCE(mfmsr() & (MSR_IR|MSR_DR)); > > > > if ((srr1 & SRR1_WAKESTATE) != SRR1_WS_NOLOSS) { > > - unsigned long mmcra; > > - > > /* > > * We don't need an isync after the mtsprs here because the > > * upcoming mtmsrd is execution synchronizing. > > @@ -721,6 +735,10 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) > > mtspr(SPRN_MMCR0, mmcr0); > > } > > > > + /* Reload MMCRA to restore BHRB disable bit for POWER10 */ > > + if (cpu_has_feature(CPU_FTR_ARCH_31)) > > + mtspr(SPRN_MMCRA, mmcra); > > + > > /* > > * DD2.2 and earlier need to set then clear bit 60 in MMCRA > > * to ensure the PMU starts running. > Just below here we have: > mmcra = mfspr(SPRN_MMCRA); > mmcra |= PPC_BIT(60); > mtspr(SPRN_MMCRA, mmcra); > mmcra &= ~PPC_BIT(60); > mtspr(SPRN_MMCRA, mmcra); > It seems MMCRA[BHRBRD] could just be OR'd in someway similar to this > for ISA v3.1? Oh wait the user could have cleared it, just ignore me. > > -- > > 1.8.3.1 > >
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index bd125fe..31c0535 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1218,7 +1218,7 @@ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0) static void power_pmu_disable(struct pmu *pmu) { struct cpu_hw_events *cpuhw; - unsigned long flags, mmcr0, val; + unsigned long flags, mmcr0, val, mmcra; if (!ppmu) return; @@ -1251,12 +1251,24 @@ static void power_pmu_disable(struct pmu *pmu) mb(); isync(); + val = mmcra = cpuhw->mmcr.mmcra; + /* * Disable instruction sampling if it was enabled */ - if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) { - mtspr(SPRN_MMCRA, - cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE); + if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) + val &= ~MMCRA_SAMPLE_ENABLE; + + /* Disable BHRB via mmcra (BHRBRD) for p10 */ + if (ppmu->flags & PPMU_ARCH_310S) + val |= MMCRA_BHRB_DISABLE; + + /* + * Write SPRN_MMCRA if mmcra has either disabled + * instruction sampling or BHRB. + */ + if (val != mmcra) { + mtspr(SPRN_MMCRA, mmcra); mb(); isync(); } diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c index 77643f3..964437a 100644 --- a/arch/powerpc/perf/isa207-common.c +++ b/arch/powerpc/perf/isa207-common.c @@ -404,6 +404,13 @@ int isa207_compute_mmcr(u64 event[], int n_ev, mmcra = mmcr1 = mmcr2 = mmcr3 = 0; + /* + * Disable bhrb unless explicitly requested + * by setting MMCRA (BHRBRD) bit. + */ + if (cpu_has_feature(CPU_FTR_ARCH_31)) + mmcra |= MMCRA_BHRB_DISABLE; + /* Second pass: assign PMCs, set all MMCR1 fields */ for (i = 0; i < n_ev; ++i) { pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK; @@ -479,6 +486,11 @@ int isa207_compute_mmcr(u64 event[], int n_ev, mmcra |= val << MMCRA_IFM_SHIFT; } + /* set MMCRA (BHRBRD) to 0 if there is user request for BHRB */ + if (cpu_has_feature(CPU_FTR_ARCH_31) && + (has_branch_stack(pevents[i]) || (event[i] & EVENT_WANTS_BHRB))) + mmcra &= ~MMCRA_BHRB_DISABLE; + if (pevents[i]->attr.exclude_user) mmcr2 |= MMCR2_FCP(pmc); diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c index 2dd4673..1c9d0a9 100644 --- a/arch/powerpc/platforms/powernv/idle.c +++ b/arch/powerpc/platforms/powernv/idle.c @@ -611,6 +611,7 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) unsigned long srr1; unsigned long pls; unsigned long mmcr0 = 0; + unsigned long mmcra = 0; struct p9_sprs sprs = {}; /* avoid false used-uninitialised */ bool sprs_saved = false; @@ -657,6 +658,21 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) */ mmcr0 = mfspr(SPRN_MMCR0); } + + if (cpu_has_feature(CPU_FTR_ARCH_31)) { + /* + * POWER10 uses MMCRA (BHRBRD) as BHRB disable bit. + * If the user hasn't asked for the BHRB to be + * written, the value of MMCRA[BHRBRD] is 1. + * On wakeup from stop, MMCRA[BHRBD] will be 0, + * since it is previleged resource and will be lost. + * Thus, if we do not save and restore the MMCRA[BHRBD], + * hardware will be needlessly writing to the BHRB + * in problem mode. + */ + mmcra = mfspr(SPRN_MMCRA); + } + if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) { sprs.lpcr = mfspr(SPRN_LPCR); sprs.hfscr = mfspr(SPRN_HFSCR); @@ -700,8 +716,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) WARN_ON_ONCE(mfmsr() & (MSR_IR|MSR_DR)); if ((srr1 & SRR1_WAKESTATE) != SRR1_WS_NOLOSS) { - unsigned long mmcra; - /* * We don't need an isync after the mtsprs here because the * upcoming mtmsrd is execution synchronizing. @@ -721,6 +735,10 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on) mtspr(SPRN_MMCR0, mmcr0); } + /* Reload MMCRA to restore BHRB disable bit for POWER10 */ + if (cpu_has_feature(CPU_FTR_ARCH_31)) + mtspr(SPRN_MMCRA, mmcra); + /* * DD2.2 and earlier need to set then clear bit 60 in MMCRA * to ensure the PMU starts running.
PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This field controls whether BHRB entries are written when BHRB recording is enabled by other bits. This patch implements support for this BHRB disable bit. By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to this bit will have BHRB enabled. This addresses backward compatibility (for older OS), since this bit will be cleared and hardware will be writing to BHRB by default. This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 ( there by the core will run faster) and enable this feature only on runtime ie, on explicit need from user. Also save/restore MMCRA in the restore path of state-loss idle state to make sure we keep BHRB disabled if it was not enabled on request at runtime. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> --- arch/powerpc/perf/core-book3s.c | 20 ++++++++++++++++---- arch/powerpc/perf/isa207-common.c | 12 ++++++++++++ arch/powerpc/platforms/powernv/idle.c | 22 ++++++++++++++++++++-- 3 files changed, 48 insertions(+), 6 deletions(-)