diff mbox

[kvm-unit-tests,v2] powerpc: Check whether TM is available before running other tests

Message ID 1475229293-11605-1-git-send-email-thuth@redhat.com
State Superseded
Headers show

Commit Message

Thomas Huth Sept. 30, 2016, 9:54 a.m. UTC
Transactional memory is currently only supported on KVM-HV, and
not yet on KVM-PR. So it's better to check the device tree first
and fail gracefully if it is not available.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 v2:
 - Reworked the check for the "ibm,pa-features" and added a comment
 - Use a dedicated variable "has_tm" instead of "i" in main()

 Laurent, Suraj, Andrew, I did not add your Reviewed-by (thanks for
 that!) from v1 here since I changed the code a little bit. So it
 would be great if you could have another quick look at this v2.

 powerpc/tm.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

Comments

Laurent Vivier Sept. 30, 2016, 10:01 a.m. UTC | #1
On 30/09/2016 11:54, Thomas Huth wrote:
> Transactional memory is currently only supported on KVM-HV, and
> not yet on KVM-PR. So it's better to check the device tree first
> and fail gracefully if it is not available.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  v2:
>  - Reworked the check for the "ibm,pa-features" and added a comment
>  - Use a dedicated variable "has_tm" instead of "i" in main()
> 
>  Laurent, Suraj, Andrew, I did not add your Reviewed-by (thanks for
>  that!) from v1 here since I changed the code a little bit. So it
>  would be great if you could have another quick look at this v2.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>

> 
>  powerpc/tm.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 42 insertions(+), 1 deletion(-)
> 
> diff --git a/powerpc/tm.c b/powerpc/tm.c
> index 6ce750a..8344318 100644
> --- a/powerpc/tm.c
> +++ b/powerpc/tm.c
> @@ -10,6 +10,41 @@
>  #include <asm/processor.h>
>  #include <asm/handlers.h>
>  #include <asm/smp.h>
> +#include <asm/setup.h>
> +#include <devicetree.h>
> +
> +/* Check "ibm,pa-features" property of a CPU node for the TM flag */
> +static void cpu_has_tm(int fdtnode, u32 regval __unused, void *ptr)
> +{
> +	const struct fdt_property *prop;
> +	int plen;
> +
> +	prop = fdt_get_property(dt_fdt(), fdtnode, "ibm,pa-features", &plen);
> +	if (!prop)	/* No features means TM is also not available */
> +		return;
> +	/* Sanity check for the property layout (first two bytes are header) */
> +	assert(plen >= 8 && prop->data[1] == 0 && prop->data[0] <= plen - 2);
> +
> +	/*
> +	 * The "Transactional Memory Category Support" flags are at byte
> +	 * offset 22 and 23 of the attribute type 0, so when adding the
> +	 * two bytes for the header, we've got to look at offset 24 for
> +	 * the TM support bit.
> +	 */
> +	if (plen >= 26 && prop->data[0] >= 24 && (prop->data[24] & 0x80) != 0)
> +		*(int *)ptr += 1;
> +}
> +
> +/* Check whether all CPU nodes have the TM flag */
> +static bool all_cpus_have_tm(void)
> +{
> +	int ret;
> +	int available = 0;
> +
> +	ret = dt_for_each_cpu_node(cpu_has_tm, &available);
> +
> +	return ret == 0 && available == nr_cpus;
> +}
>  
>  static int h_cede(void)
>  {
> @@ -101,11 +136,17 @@ struct {
>  
>  int main(int argc, char **argv)
>  {
> -	bool all;
> +	bool all, has_tm;
>  	int i;
>  
>  	report_prefix_push("tm");
>  
> +	has_tm = all_cpus_have_tm();
> +	report_xfail("TM available in 'ibm,pa-features' property",
> +		     !has_tm, has_tm);
> +	if (!has_tm)
> +		return report_summary();
> +
>  	all = argc == 1 || !strcmp(argv[1], "all");
>  
>  	for (i = 0; hctests[i].name != NULL; i++) {
> 
--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andrew Jones Sept. 30, 2016, 11:32 a.m. UTC | #2
On Fri, Sep 30, 2016 at 11:54:53AM +0200, Thomas Huth wrote:
> Transactional memory is currently only supported on KVM-HV, and
> not yet on KVM-PR. So it's better to check the device tree first
> and fail gracefully if it is not available.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  v2:
>  - Reworked the check for the "ibm,pa-features" and added a comment
>  - Use a dedicated variable "has_tm" instead of "i" in main()
> 
>  Laurent, Suraj, Andrew, I did not add your Reviewed-by (thanks for
>  that!) from v1 here since I changed the code a little bit. So it
>  would be great if you could have another quick look at this v2.
> 
>  powerpc/tm.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 42 insertions(+), 1 deletion(-)
>

Reviewed-by: Andrew Jones <drjones@redhat.com> 
--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Suraj Jitindar Singh Oct. 4, 2016, 12:48 a.m. UTC | #3
On Fri, 2016-09-30 at 11:54 +0200, Thomas Huth wrote:
> Transactional memory is currently only supported on KVM-HV, and
> not yet on KVM-PR. So it's better to check the device tree first
> and fail gracefully if it is not available.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  v2:
>  - Reworked the check for the "ibm,pa-features" and added a comment
>  - Use a dedicated variable "has_tm" instead of "i" in main()
> 
>  Laurent, Suraj, Andrew, I did not add your Reviewed-by (thanks for
>  that!) from v1 here since I changed the code a little bit. So it
>  would be great if you could have another quick look at this v2.
Comments below
> 
>  powerpc/tm.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 42 insertions(+), 1 deletion(-)
> 
> diff --git a/powerpc/tm.c b/powerpc/tm.c
> index 6ce750a..8344318 100644
> --- a/powerpc/tm.c
> +++ b/powerpc/tm.c
> @@ -10,6 +10,41 @@
>  #include <asm/processor.h>
>  #include <asm/handlers.h>
>  #include <asm/smp.h>
> +#include <asm/setup.h>
> +#include <devicetree.h>
> +
> +/* Check "ibm,pa-features" property of a CPU node for the TM flag */
> +static void cpu_has_tm(int fdtnode, u32 regval __unused, void *ptr)
> +{
> +	const struct fdt_property *prop;
> +	int plen;
> +
> +	prop = fdt_get_property(dt_fdt(), fdtnode, "ibm,pa-
> features", &plen);
> +	if (!prop)	/* No features means TM is also not
> available */
> +		return;
> +	/* Sanity check for the property layout (first two bytes are
> header) */
> +	assert(plen >= 8 && prop->data[1] == 0 && prop->data[0] <=
> plen - 2);
Just curious as to why you're checking "prop->data[0] *<=* plen - 2" as
isn't anything other than prop->data[0] *==* plen - 2 an error in the
structure of ibm,pa-features and thus an error in the device-tree?
> +
> +	/*
> +	 * The "Transactional Memory Category Support" flags are at
> byte
> +	 * offset 22 and 23 of the attribute type 0, so when adding
> the
> +	 * two bytes for the header, we've got to look at offset 24
> for
> +	 * the TM support bit.
> +	 */
> +	if (plen >= 26 && prop->data[0] >= 24 && (prop->data[24] &
> 0x80) != 0)
With the sanity checking you performed before isn't it sufficient to
check "prop->data[0] >= 24" as this guarantees that "plen >= 26". If
you were to change the above to "prop->data[0] == plen - 2" then either
one of the two checks could be kept as sufficient to ensure the other.
> +		*(int *)ptr += 1;
> +}
> +
> +/* Check whether all CPU nodes have the TM flag */
> +static bool all_cpus_have_tm(void)
> +{
> +	int ret;
> +	int available = 0;
> +
> +	ret = dt_for_each_cpu_node(cpu_has_tm, &available);
> +
> +	return ret == 0 && available == nr_cpus;
> +}
>  
>  static int h_cede(void)
>  {
> @@ -101,11 +136,17 @@ struct {
>  
>  int main(int argc, char **argv)
>  {
> -	bool all;
> +	bool all, has_tm;
>  	int i;
>  
>  	report_prefix_push("tm");
>  
> +	has_tm = all_cpus_have_tm();
> +	report_xfail("TM available in 'ibm,pa-features' property",
> +		     !has_tm, has_tm);
> +	if (!has_tm)
> +		return report_summary();
> +
>  	all = argc == 1 || !strcmp(argv[1], "all");
>  
>  	for (i = 0; hctests[i].name != NULL; i++) {
--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thomas Huth Oct. 4, 2016, 8:23 a.m. UTC | #4
On 04.10.2016 02:48, Suraj Jitindar Singh wrote:
> On Fri, 2016-09-30 at 11:54 +0200, Thomas Huth wrote:
>> Transactional memory is currently only supported on KVM-HV, and
>> not yet on KVM-PR. So it's better to check the device tree first
>> and fail gracefully if it is not available.
>>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>>  v2:
>>  - Reworked the check for the "ibm,pa-features" and added a comment
>>  - Use a dedicated variable "has_tm" instead of "i" in main()
>>
>>  Laurent, Suraj, Andrew, I did not add your Reviewed-by (thanks for
>>  that!) from v1 here since I changed the code a little bit. So it
>>  would be great if you could have another quick look at this v2.
> Comments below
>>
>>  powerpc/tm.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
>>  1 file changed, 42 insertions(+), 1 deletion(-)
>>
>> diff --git a/powerpc/tm.c b/powerpc/tm.c
>> index 6ce750a..8344318 100644
>> --- a/powerpc/tm.c
>> +++ b/powerpc/tm.c
>> @@ -10,6 +10,41 @@
>>  #include <asm/processor.h>
>>  #include <asm/handlers.h>
>>  #include <asm/smp.h>
>> +#include <asm/setup.h>
>> +#include <devicetree.h>
>> +
>> +/* Check "ibm,pa-features" property of a CPU node for the TM flag */
>> +static void cpu_has_tm(int fdtnode, u32 regval __unused, void *ptr)
>> +{
>> +	const struct fdt_property *prop;
>> +	int plen;
>> +
>> +	prop = fdt_get_property(dt_fdt(), fdtnode, "ibm,pa-
>> features", &plen);
>> +	if (!prop)	/* No features means TM is also not
>> available */
>> +		return;
>> +	/* Sanity check for the property layout (first two bytes are
>> header) */
>> +	assert(plen >= 8 && prop->data[1] == 0 && prop->data[0] <=
>> plen - 2);
>
> Just curious as to why you're checking "prop->data[0] *<=* plen - 2" as
> isn't anything other than prop->data[0] *==* plen - 2 an error in the
> structure of ibm,pa-features and thus an error in the device-tree?

QEMU currently uses prop->data[0] == plen - 2 , but looking at the
LoPAPR specification, it clearly defines this property as
"prop-encoded-array: One or more attribute-descriptor(s)", so there
could be two or more attributes encoded in this property. While there is
currently only attribute type 0 defined in the LoPAPR specification, it
could be extended with other types in the future. So with the  "<=", the
code is already prepared for this situation in the future.

>> +
>> +	/*
>> +	 * The "Transactional Memory Category Support" flags are at
>> byte
>> +	 * offset 22 and 23 of the attribute type 0, so when adding
>> the
>> +	 * two bytes for the header, we've got to look at offset 24
>> for
>> +	 * the TM support bit.
>> +	 */
>> +	if (plen >= 26 && prop->data[0] >= 24 && (prop->data[24] &
>> 0x80) != 0)
> With the sanity checking you performed before isn't it sufficient to
> check "prop->data[0] >= 24" as this guarantees that "plen >= 26".

You're right, since the assert() already checked that
"data[0] <= plen - 2", and I also check that "data[0] >= 24", we
can automatically assume that "24 <= plen - 2", i.e. "plen >= 26".
I'll send a v3 with that check removed.

 Thomas

--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Suraj Jitindar Singh Oct. 5, 2016, 7:22 a.m. UTC | #5
On Tue, 2016-10-04 at 10:23 +0200, Thomas Huth wrote:
> On 04.10.2016 02:48, Suraj Jitindar Singh wrote:
> > 
> > On Fri, 2016-09-30 at 11:54 +0200, Thomas Huth wrote:
> > > 
> > > Transactional memory is currently only supported on KVM-HV, and
> > > not yet on KVM-PR. So it's better to check the device tree first
> > > and fail gracefully if it is not available.
> > > 
> > > Signed-off-by: Thomas Huth <thuth@redhat.com>
> > > ---
> > >  v2:
> > >  - Reworked the check for the "ibm,pa-features" and added a
> > > comment
> > >  - Use a dedicated variable "has_tm" instead of "i" in main()
> > > 
> > >  Laurent, Suraj, Andrew, I did not add your Reviewed-by (thanks
> > > for
> > >  that!) from v1 here since I changed the code a little bit. So it
> > >  would be great if you could have another quick look at this v2.
> > Comments below
> > > 
> > > 
> > >  powerpc/tm.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
> > >  1 file changed, 42 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/powerpc/tm.c b/powerpc/tm.c
> > > index 6ce750a..8344318 100644
> > > --- a/powerpc/tm.c
> > > +++ b/powerpc/tm.c
> > > @@ -10,6 +10,41 @@
> > >  #include <asm/processor.h>
> > >  #include <asm/handlers.h>
> > >  #include <asm/smp.h>
> > > +#include <asm/setup.h>
> > > +#include <devicetree.h>
> > > +
> > > +/* Check "ibm,pa-features" property of a CPU node for the TM
> > > flag */
> > > +static void cpu_has_tm(int fdtnode, u32 regval __unused, void
> > > *ptr)
> > > +{
> > > +	const struct fdt_property *prop;
> > > +	int plen;
> > > +
> > > +	prop = fdt_get_property(dt_fdt(), fdtnode, "ibm,pa-
> > > features", &plen);
> > > +	if (!prop)	/* No features means TM is also not
> > > available */
> > > +		return;
> > > +	/* Sanity check for the property layout (first two bytes
> > > are
> > > header) */
> > > +	assert(plen >= 8 && prop->data[1] == 0 && prop->data[0]
> > > <=
> > > plen - 2);
> > Just curious as to why you're checking "prop->data[0] *<=* plen -
> > 2" as
> > isn't anything other than prop->data[0] *==* plen - 2 an error in
> > the
> > structure of ibm,pa-features and thus an error in the device-tree?
> QEMU currently uses prop->data[0] == plen - 2 , but looking at the
> LoPAPR specification, it clearly defines this property as
> "prop-encoded-array: One or more attribute-descriptor(s)", so there
> could be two or more attributes encoded in this property. While there
> is
> currently only attribute type 0 defined in the LoPAPR specification,
> it
> could be extended with other types in the future. So with the  "<=",
> the
> code is already prepared for this situation in the future.
Sorry I do see that now, my misunderstanding.
> 
> > 
> > > 
> > > +
> > > +	/*
> > > +	 * The "Transactional Memory Category Support" flags are
> > > at
> > > byte
> > > +	 * offset 22 and 23 of the attribute type 0, so when
> > > adding
> > > the
> > > +	 * two bytes for the header, we've got to look at offset
> > > 24
> > > for
> > > +	 * the TM support bit.
> > > +	 */
> > > +	if (plen >= 26 && prop->data[0] >= 24 && (prop->data[24] 
> > > &
> > > 0x80) != 0)
> > With the sanity checking you performed before isn't it sufficient
> > to
> > check "prop->data[0] >= 24" as this guarantees that "plen >= 26".
> You're right, since the assert() already checked that
> "data[0] <= plen - 2", and I also check that "data[0] >= 24", we
> can automatically assume that "24 <= plen - 2", i.e. "plen >= 26".
> I'll send a v3 with that check removed.
Thanks
> 
>  Thomas
> 
--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/powerpc/tm.c b/powerpc/tm.c
index 6ce750a..8344318 100644
--- a/powerpc/tm.c
+++ b/powerpc/tm.c
@@ -10,6 +10,41 @@ 
 #include <asm/processor.h>
 #include <asm/handlers.h>
 #include <asm/smp.h>
+#include <asm/setup.h>
+#include <devicetree.h>
+
+/* Check "ibm,pa-features" property of a CPU node for the TM flag */
+static void cpu_has_tm(int fdtnode, u32 regval __unused, void *ptr)
+{
+	const struct fdt_property *prop;
+	int plen;
+
+	prop = fdt_get_property(dt_fdt(), fdtnode, "ibm,pa-features", &plen);
+	if (!prop)	/* No features means TM is also not available */
+		return;
+	/* Sanity check for the property layout (first two bytes are header) */
+	assert(plen >= 8 && prop->data[1] == 0 && prop->data[0] <= plen - 2);
+
+	/*
+	 * The "Transactional Memory Category Support" flags are at byte
+	 * offset 22 and 23 of the attribute type 0, so when adding the
+	 * two bytes for the header, we've got to look at offset 24 for
+	 * the TM support bit.
+	 */
+	if (plen >= 26 && prop->data[0] >= 24 && (prop->data[24] & 0x80) != 0)
+		*(int *)ptr += 1;
+}
+
+/* Check whether all CPU nodes have the TM flag */
+static bool all_cpus_have_tm(void)
+{
+	int ret;
+	int available = 0;
+
+	ret = dt_for_each_cpu_node(cpu_has_tm, &available);
+
+	return ret == 0 && available == nr_cpus;
+}
 
 static int h_cede(void)
 {
@@ -101,11 +136,17 @@  struct {
 
 int main(int argc, char **argv)
 {
-	bool all;
+	bool all, has_tm;
 	int i;
 
 	report_prefix_push("tm");
 
+	has_tm = all_cpus_have_tm();
+	report_xfail("TM available in 'ibm,pa-features' property",
+		     !has_tm, has_tm);
+	if (!has_tm)
+		return report_summary();
+
 	all = argc == 1 || !strcmp(argv[1], "all");
 
 	for (i = 0; hctests[i].name != NULL; i++) {