From patchwork Thu Oct 31 21:17:51 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alexander Graf X-Patchwork-Id: 287667 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 8073E2C0402 for ; Fri, 1 Nov 2013 08:21:36 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755812Ab3JaVVe (ORCPT ); Thu, 31 Oct 2013 17:21:34 -0400 Received: from cantor2.suse.de ([195.135.220.15]:54317 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754988Ab3JaVSm (ORCPT ); Thu, 31 Oct 2013 17:18:42 -0400 Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id B0D83A5D9F; Thu, 31 Oct 2013 22:18:40 +0100 (CET) From: Alexander Graf To: "kvm@vger.kernel.org mailing list" Cc: kvm-ppc@vger.kernel.org, Gleb Natapov , Paolo Bonzini , Paul Mackerras Subject: [PULL 06/51] KVM: PPC: Book3S HV: Restructure kvmppc_hv_entry to be a subroutine Date: Thu, 31 Oct 2013 22:17:51 +0100 Message-Id: <1383254316-11243-7-git-send-email-agraf@suse.de> X-Mailer: git-send-email 1.7.12.4 In-Reply-To: <1383254316-11243-1-git-send-email-agraf@suse.de> References: <1383254316-11243-1-git-send-email-agraf@suse.de> Sender: kvm-ppc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: kvm-ppc@vger.kernel.org From: Paul Mackerras We have two paths into and out of the low-level guest entry and exit code: from a vcpu task via kvmppc_hv_entry_trampoline, and from the system reset vector for an offline secondary thread on POWER7 via kvm_start_guest. Currently both just branch to kvmppc_hv_entry to enter the guest, and on guest exit, we test the vcpu physical thread ID to detect which way we came in and thus whether we should return to the vcpu task or go back to nap mode. In order to make the code flow clearer, and to keep the code relating to each flow together, this turns kvmppc_hv_entry into a subroutine that follows the normal conventions for call and return. This means that kvmppc_hv_entry_trampoline() and kvmppc_hv_entry() now establish normal stack frames, and we use the normal stack slots for saving return addresses rather than local_paca->kvm_hstate.vmhandler. Apart from that this is mostly moving code around unchanged. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 344 +++++++++++++++++--------------- 1 file changed, 178 insertions(+), 166 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 82b06df..2bf2951 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -66,8 +66,11 @@ kvmppc_skip_Hinterrupt: * LR = return address to continue at after eventually re-enabling MMU */ _GLOBAL(kvmppc_hv_entry_trampoline) + mflr r0 + std r0, PPC_LR_STKOFF(r1) + stdu r1, -112(r1) mfmsr r10 - LOAD_REG_ADDR(r5, kvmppc_hv_entry) + LOAD_REG_ADDR(r5, kvmppc_call_hv_entry) li r0,MSR_RI andc r0,r10,r0 li r6,MSR_IR | MSR_DR @@ -77,11 +80,103 @@ _GLOBAL(kvmppc_hv_entry_trampoline) mtsrr1 r6 RFI -/****************************************************************************** - * * - * Entry code * - * * - *****************************************************************************/ +kvmppc_call_hv_entry: + bl kvmppc_hv_entry + + /* Back from guest - restore host state and return to caller */ + + /* Restore host DABR and DABRX */ + ld r5,HSTATE_DABR(r13) + li r6,7 + mtspr SPRN_DABR,r5 + mtspr SPRN_DABRX,r6 + + /* Restore SPRG3 */ + ld r3,PACA_SPRG3(r13) + mtspr SPRN_SPRG3,r3 + + /* + * Reload DEC. HDEC interrupts were disabled when + * we reloaded the host's LPCR value. + */ + ld r3, HSTATE_DECEXP(r13) + mftb r4 + subf r4, r4, r3 + mtspr SPRN_DEC, r4 + + /* Reload the host's PMU registers */ + ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */ + lbz r4, LPPACA_PMCINUSE(r3) + cmpwi r4, 0 + beq 23f /* skip if not */ + lwz r3, HSTATE_PMC(r13) + lwz r4, HSTATE_PMC + 4(r13) + lwz r5, HSTATE_PMC + 8(r13) + lwz r6, HSTATE_PMC + 12(r13) + lwz r8, HSTATE_PMC + 16(r13) + lwz r9, HSTATE_PMC + 20(r13) +BEGIN_FTR_SECTION + lwz r10, HSTATE_PMC + 24(r13) + lwz r11, HSTATE_PMC + 28(r13) +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) + mtspr SPRN_PMC1, r3 + mtspr SPRN_PMC2, r4 + mtspr SPRN_PMC3, r5 + mtspr SPRN_PMC4, r6 + mtspr SPRN_PMC5, r8 + mtspr SPRN_PMC6, r9 +BEGIN_FTR_SECTION + mtspr SPRN_PMC7, r10 + mtspr SPRN_PMC8, r11 +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) + ld r3, HSTATE_MMCR(r13) + ld r4, HSTATE_MMCR + 8(r13) + ld r5, HSTATE_MMCR + 16(r13) + mtspr SPRN_MMCR1, r4 + mtspr SPRN_MMCRA, r5 + mtspr SPRN_MMCR0, r3 + isync +23: + + /* + * For external and machine check interrupts, we need + * to call the Linux handler to process the interrupt. + * We do that by jumping to absolute address 0x500 for + * external interrupts, or the machine_check_fwnmi label + * for machine checks (since firmware might have patched + * the vector area at 0x200). The [h]rfid at the end of the + * handler will return to the book3s_hv_interrupts.S code. + * For other interrupts we do the rfid to get back + * to the book3s_hv_interrupts.S code here. + */ + ld r8, 112+PPC_LR_STKOFF(r1) + addi r1, r1, 112 + ld r7, HSTATE_HOST_MSR(r13) + + cmpwi cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK + cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL +BEGIN_FTR_SECTION + beq 11f +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) + + /* RFI into the highmem handler, or branch to interrupt handler */ + mfmsr r6 + li r0, MSR_RI + andc r6, r6, r0 + mtmsrd r6, 1 /* Clear RI in MSR */ + mtsrr0 r8 + mtsrr1 r7 + beqa 0x500 /* external interrupt (PPC970) */ + beq cr1, 13f /* machine check */ + RFI + + /* On POWER7, we have external interrupts set to use HSRR0/1 */ +11: mtspr SPRN_HSRR0, r8 + mtspr SPRN_HSRR1, r7 + ba 0x500 + +13: b machine_check_fwnmi + /* * We come in here when wakened from nap mode on a secondary hw thread. @@ -137,7 +232,7 @@ kvm_start_guest: cmpdi r4,0 /* if we have no vcpu to run, go back to sleep */ beq kvm_no_guest - b kvmppc_hv_entry + b 30f 27: /* XXX should handle hypervisor maintenance interrupts etc. here */ b kvm_no_guest @@ -147,6 +242,57 @@ kvm_start_guest: stw r8,HSTATE_SAVED_XIRR(r13) b kvm_no_guest +30: bl kvmppc_hv_entry + + /* Back from the guest, go back to nap */ + /* Clear our vcpu pointer so we don't come back in early */ + li r0, 0 + std r0, HSTATE_KVM_VCPU(r13) + lwsync + /* Clear any pending IPI - we're an offline thread */ + ld r5, HSTATE_XICS_PHYS(r13) + li r7, XICS_XIRR + lwzcix r3, r5, r7 /* ack any pending interrupt */ + rlwinm. r0, r3, 0, 0xffffff /* any pending? */ + beq 37f + sync + li r0, 0xff + li r6, XICS_MFRR + stbcix r0, r5, r6 /* clear the IPI */ + stwcix r3, r5, r7 /* EOI it */ +37: sync + + /* increment the nap count and then go to nap mode */ + ld r4, HSTATE_KVM_VCORE(r13) + addi r4, r4, VCORE_NAP_COUNT + lwsync /* make previous updates visible */ +51: lwarx r3, 0, r4 + addi r3, r3, 1 + stwcx. r3, 0, r4 + bne 51b + +kvm_no_guest: + li r0, KVM_HWTHREAD_IN_NAP + stb r0, HSTATE_HWTHREAD_STATE(r13) + li r3, LPCR_PECE0 + mfspr r4, SPRN_LPCR + rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1 + mtspr SPRN_LPCR, r4 + isync + std r0, HSTATE_SCRATCH0(r13) + ptesync + ld r0, HSTATE_SCRATCH0(r13) +1: cmpd r0, r0 + bne 1b + nap + b . + +/****************************************************************************** + * * + * Entry code * + * * + *****************************************************************************/ + .global kvmppc_hv_entry kvmppc_hv_entry: @@ -159,7 +305,8 @@ kvmppc_hv_entry: * all other volatile GPRS = free */ mflr r0 - std r0, HSTATE_VMHANDLER(r13) + std r0, PPC_LR_STKOFF(r1) + stdu r1, -112(r1) /* Set partition DABR */ /* Do this before re-enabling PMU to avoid P7 DABR corruption bug */ @@ -1198,103 +1345,30 @@ BEGIN_FTR_SECTION stw r11, VCPU_PMC + 28(r9) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) 22: + ld r0, 112+PPC_LR_STKOFF(r1) + addi r1, r1, 112 + mtlr r0 + blr +secondary_too_late: + ld r5,HSTATE_KVM_VCORE(r13) + HMT_LOW +13: lbz r3,VCORE_IN_GUEST(r5) + cmpwi r3,0 + bne 13b + HMT_MEDIUM + li r0, KVM_GUEST_MODE_NONE + stb r0, HSTATE_IN_GUEST(r13) + ld r11,PACA_SLBSHADOWPTR(r13) - /* Secondary threads go off to take a nap on POWER7 */ -BEGIN_FTR_SECTION - lwz r0,VCPU_PTID(r9) - cmpwi r0,0 - bne secondary_nap -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) - - /* Restore host DABR and DABRX */ - ld r5,HSTATE_DABR(r13) - li r6,7 - mtspr SPRN_DABR,r5 - mtspr SPRN_DABRX,r6 - - /* Restore SPRG3 */ - ld r3,PACA_SPRG3(r13) - mtspr SPRN_SPRG3,r3 - - /* - * Reload DEC. HDEC interrupts were disabled when - * we reloaded the host's LPCR value. - */ - ld r3, HSTATE_DECEXP(r13) - mftb r4 - subf r4, r4, r3 - mtspr SPRN_DEC, r4 - - /* Reload the host's PMU registers */ - ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */ - lbz r4, LPPACA_PMCINUSE(r3) - cmpwi r4, 0 - beq 23f /* skip if not */ - lwz r3, HSTATE_PMC(r13) - lwz r4, HSTATE_PMC + 4(r13) - lwz r5, HSTATE_PMC + 8(r13) - lwz r6, HSTATE_PMC + 12(r13) - lwz r8, HSTATE_PMC + 16(r13) - lwz r9, HSTATE_PMC + 20(r13) -BEGIN_FTR_SECTION - lwz r10, HSTATE_PMC + 24(r13) - lwz r11, HSTATE_PMC + 28(r13) -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) - mtspr SPRN_PMC1, r3 - mtspr SPRN_PMC2, r4 - mtspr SPRN_PMC3, r5 - mtspr SPRN_PMC4, r6 - mtspr SPRN_PMC5, r8 - mtspr SPRN_PMC6, r9 -BEGIN_FTR_SECTION - mtspr SPRN_PMC7, r10 - mtspr SPRN_PMC8, r11 -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) - ld r3, HSTATE_MMCR(r13) - ld r4, HSTATE_MMCR + 8(r13) - ld r5, HSTATE_MMCR + 16(r13) - mtspr SPRN_MMCR1, r4 - mtspr SPRN_MMCRA, r5 - mtspr SPRN_MMCR0, r3 - isync -23: - /* - * For external and machine check interrupts, we need - * to call the Linux handler to process the interrupt. - * We do that by jumping to absolute address 0x500 for - * external interrupts, or the machine_check_fwnmi label - * for machine checks (since firmware might have patched - * the vector area at 0x200). The [h]rfid at the end of the - * handler will return to the book3s_hv_interrupts.S code. - * For other interrupts we do the rfid to get back - * to the book3s_hv_interrupts.S code here. - */ - ld r8, HSTATE_VMHANDLER(r13) - ld r7, HSTATE_HOST_MSR(r13) - - cmpwi cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK - cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL -BEGIN_FTR_SECTION - beq 11f -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) - - /* RFI into the highmem handler, or branch to interrupt handler */ - mfmsr r6 - li r0, MSR_RI - andc r6, r6, r0 - mtmsrd r6, 1 /* Clear RI in MSR */ - mtsrr0 r8 - mtsrr1 r7 - beqa 0x500 /* external interrupt (PPC970) */ - beq cr1, 13f /* machine check */ - RFI - - /* On POWER7, we have external interrupts set to use HSRR0/1 */ -11: mtspr SPRN_HSRR0, r8 - mtspr SPRN_HSRR1, r7 - ba 0x500 - -13: b machine_check_fwnmi + .rept SLB_NUM_BOLTED + ld r5,SLBSHADOW_SAVEAREA(r11) + ld r6,SLBSHADOW_SAVEAREA+8(r11) + andis. r7,r5,SLB_ESID_V@h + beq 1f + slbmte r6,r5 +1: addi r11,r11,16 + .endr + b 22b /* * Check whether an HDSI is an HPTE not found fault or something else. @@ -1741,68 +1815,6 @@ machine_check_realmode: rotldi r11, r11, 63 b fast_interrupt_c_return -secondary_too_late: - ld r5,HSTATE_KVM_VCORE(r13) - HMT_LOW -13: lbz r3,VCORE_IN_GUEST(r5) - cmpwi r3,0 - bne 13b - HMT_MEDIUM - ld r11,PACA_SLBSHADOWPTR(r13) - - .rept SLB_NUM_BOLTED - ld r5,SLBSHADOW_SAVEAREA(r11) - ld r6,SLBSHADOW_SAVEAREA+8(r11) - andis. r7,r5,SLB_ESID_V@h - beq 1f - slbmte r6,r5 -1: addi r11,r11,16 - .endr - -secondary_nap: - /* Clear our vcpu pointer so we don't come back in early */ - li r0, 0 - std r0, HSTATE_KVM_VCPU(r13) - lwsync - /* Clear any pending IPI - assume we're a secondary thread */ - ld r5, HSTATE_XICS_PHYS(r13) - li r7, XICS_XIRR - lwzcix r3, r5, r7 /* ack any pending interrupt */ - rlwinm. r0, r3, 0, 0xffffff /* any pending? */ - beq 37f - sync - li r0, 0xff - li r6, XICS_MFRR - stbcix r0, r5, r6 /* clear the IPI */ - stwcix r3, r5, r7 /* EOI it */ -37: sync - - /* increment the nap count and then go to nap mode */ - ld r4, HSTATE_KVM_VCORE(r13) - addi r4, r4, VCORE_NAP_COUNT - lwsync /* make previous updates visible */ -51: lwarx r3, 0, r4 - addi r3, r3, 1 - stwcx. r3, 0, r4 - bne 51b - -kvm_no_guest: - li r0, KVM_HWTHREAD_IN_NAP - stb r0, HSTATE_HWTHREAD_STATE(r13) - - li r3, LPCR_PECE0 - mfspr r4, SPRN_LPCR - rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1 - mtspr SPRN_LPCR, r4 - isync - std r0, HSTATE_SCRATCH0(r13) - ptesync - ld r0, HSTATE_SCRATCH0(r13) -1: cmpd r0, r0 - bne 1b - nap - b . - /* * Save away FP, VMX and VSX registers. * r3 = vcpu pointer