diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 7a73510..299afff 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -45,8 +45,6 @@ static s32  igb_get_cfg_done_82575(struct e1000_hw *);
 static s32  igb_init_hw_82575(struct e1000_hw *);
 static s32  igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
 static s32  igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
-static s32  igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
-static s32  igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
 static s32  igb_reset_hw_82575(struct e1000_hw *);
 static s32  igb_reset_hw_82580(struct e1000_hw *);
 static s32  igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
@@ -205,13 +203,10 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
 		case e1000_82580:
 		case e1000_i350:
 		case e1000_i354:
-			phy->ops.read_reg = igb_read_phy_reg_82580;
-			phy->ops.write_reg = igb_write_phy_reg_82580;
-			break;
 		case e1000_i210:
 		case e1000_i211:
-			phy->ops.read_reg = igb_read_phy_reg_gs40g;
-			phy->ops.write_reg = igb_write_phy_reg_gs40g;
+			phy->ops.read_reg = igb_read_phy_reg_82580;
+			phy->ops.write_reg = igb_write_phy_reg_82580;
 			break;
 		default:
 			phy->ops.read_reg = igb_read_phy_reg_igp;
@@ -2145,7 +2140,7 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
  *  Reads the MDI control register in the PHY at offset and stores the
  *  information read to data.
  **/
-static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
 {
 	s32 ret_val;
 
@@ -2169,7 +2164,7 @@ out:
  *
  *  Writes data to MDI control register in the PHY at offset.
  **/
-static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
 {
 	s32 ret_val;
 
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 65d9316..4253f7e 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -861,10 +861,10 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
 	if (ret_val)
 		nvm_word = E1000_INVM_DEFAULT_AL;
 	tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+	igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE);
 	for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
 		/* check current state directly from internal PHY */
-		igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
-					 E1000_PHY_PLL_FREQ_REG), &phy_word);
+		igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);
 		if ((phy_word & E1000_PHY_PLL_UNCONF)
 		    != E1000_PHY_PLL_UNCONF) {
 			ret_val = 0;
@@ -896,6 +896,7 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
 		/* restore WUC register */
 		wr32(E1000_WUC, wuc);
 	}
+	igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, 0);
 	/* restore MDICNFG setting */
 	wr32(E1000_MDICNFG, mdicnfg);
 	return ret_val;
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index 3442b63..8aef787 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -84,7 +84,7 @@ enum E1000_INVM_STRUCTURE_TYPE {
 #define E1000_PCI_PMCSR_D3		0x03
 #define E1000_MAX_PLL_TRIES		5
 #define E1000_PHY_PLL_UNCONF		0xFF
-#define E1000_PHY_PLL_FREQ_PAGE		0xFC0000
+#define E1000_PHY_PLL_FREQ_PAGE		0xFC
 #define E1000_PHY_PLL_FREQ_REG		0x000E
 #define E1000_INVM_DEFAULT_AL		0x202F
 #define E1000_INVM_AUTOLOAD		0x0A
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 23ec28f..ec1aea5 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1719,30 +1719,10 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
 	u16 phy_data, phy_data2, index, default_page, is_cm;
 
 	switch (hw->phy.id) {
-	case I210_I_PHY_ID:
-		/* Get cable length from PHY Cable Diagnostics Control Reg */
-		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
-					    (I347AT4_PCDL + phy->addr),
-					    &phy_data);
-		if (ret_val)
-			return ret_val;
-
-		/* Check if the unit of cable length is meters or cm */
-		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
-					    I347AT4_PCDC, &phy_data2);
-		if (ret_val)
-			return ret_val;
-
-		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
-
-		/* Populate the phy structure with cable length in meters */
-		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->cable_length = phy_data / (is_cm ? 100 : 1);
-		break;
 	case M88E1543_E_PHY_ID:
 	case M88E1512_E_PHY_ID:
 	case I347AT4_E_PHY_ID:
+	case I210_I_PHY_ID:
 		/* Remember the original page select and set it to 7 */
 		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
 					    &default_page);
@@ -2494,66 +2474,6 @@ out:
 }
 
 /**
- *  igb_write_phy_reg_gs40g - Write GS40G PHY register
- *  @hw: pointer to the HW structure
- *  @offset: lower half is register offset to write to
- *     upper half is page to use.
- *  @data: data to write at register offset
- *
- *  Acquires semaphore, if necessary, then writes the data to PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	s32 ret_val;
-	u16 page = offset >> GS40G_PAGE_SHIFT;
-
-	offset = offset & GS40G_OFFSET_MASK;
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-	if (ret_val)
-		goto release;
-	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-
-release:
-	hw->phy.ops.release(hw);
-	return ret_val;
-}
-
-/**
- *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
- *  @hw: pointer to the HW structure
- *  @offset: lower half is register offset to read to
- *     upper half is page to use.
- *  @data: data to read at register offset
- *
- *  Acquires semaphore, if necessary, then reads the data in the PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	s32 ret_val;
-	u16 page = offset >> GS40G_PAGE_SHIFT;
-
-	offset = offset & GS40G_OFFSET_MASK;
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-	if (ret_val)
-		goto release;
-	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-
-release:
-	hw->phy.ops.release(hw);
-	return ret_val;
-}
-
-/**
  *  igb_set_master_slave_mode - Setup PHY for Master/slave mode
  *  @hw: pointer to the HW structure
  *
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index 24d55ed..581172a 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -71,8 +71,8 @@ s32  igb_copper_link_setup_82580(struct e1000_hw *hw);
 s32  igb_get_phy_info_82580(struct e1000_hw *hw);
 s32  igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
 s32  igb_get_cable_length_82580(struct e1000_hw *hw);
-s32  igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
-s32  igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32  igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_check_polarity_m88(struct e1000_hw *hw);
 
 /* IGP01E1000 Specific Registers */
@@ -143,17 +143,6 @@ s32  igb_check_polarity_m88(struct e1000_hw *hw);
 
 #define E1000_CABLE_LENGTH_UNDEFINED      0xFF
 
-/* GS40G - I210 PHY defines */
-#define GS40G_PAGE_SELECT		0x16
-#define GS40G_PAGE_SHIFT		16
-#define GS40G_OFFSET_MASK		0xFFFF
-#define GS40G_PAGE_2			0x20000
-#define GS40G_MAC_REG2			0x15
-#define GS40G_MAC_LB			0x4140
-#define GS40G_MAC_SPEED_1G		0X0006
-#define GS40G_COPPER_SPEC		0x0010
-#define GS40G_LINE_LB			0x4000
-
 /* SFP modules ID memory locations */
 #define E1000_SFF_IDENTIFIER_OFFSET	0x00
 #define E1000_SFF_IDENTIFIER_SFF	0x02
