| Message ID | 20240410043936.206169-2-jdamato@fastly.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | i40e: Add support for netlink API | expand |
On 4/9/2024 9:39 PM, Joe Damato wrote: > Make i40e compatible with the newly added netlink queue GET APIs. > > $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ > --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}' > > {'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'} > > $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ > --do napi-get --json '{"id": 162}' > > {'id': 162, 'ifindex': 3, 'irq': 136} > > The above output suggests that irq 136 was allocated for queue 1, which has > a NAPI ID of 162. > > To double check this is correct, the IRQ to queue mapping can be verified > by checking /proc/interrupts: > > $ cat /proc/interrupts | grep 136\: | \ > awk '{print "irq: " $1 " name " $76}' > > irq: 136: name i40e-vlan300-TxRx-1 > > Suggests that queue 1 has IRQ 136, as expected. > > Signed-off-by: Joe Damato <jdamato@fastly.com> > --- > drivers/net/ethernet/intel/i40e/i40e.h | 2 + > drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ > drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ > 3 files changed, 64 insertions(+) > > diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h > index 2fbabcdb5bb5..5900ed5c7170 100644 > --- a/drivers/net/ethernet/intel/i40e/i40e.h > +++ b/drivers/net/ethernet/intel/i40e/i40e.h > @@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); > int i40e_open(struct net_device *netdev); > int i40e_close(struct net_device *netdev); > int i40e_vsi_open(struct i40e_vsi *vsi); > +void i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, > + enum netdev_queue_type type, struct napi_struct *napi); > void i40e_vlan_stripping_disable(struct i40e_vsi *vsi); > int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid); > int i40e_vsi_add_vlan(struct i40e_vsi *vsi, u16 vid); > diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c > index 0bdcdea0be3e..6384a0c73a05 100644 > --- a/drivers/net/ethernet/intel/i40e/i40e_main.c > +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c > @@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) > return xsk_get_pool_from_qid(ring->vsi->netdev, qid); > } > > +/** > + * __i40e_queue_set_napi - Set the napi instance for the queue > + * @dev: device to which NAPI and queue belong > + * @queue_index: Index of queue > + * @type: queue type as RX or TX > + * @napi: NAPI context > + * @locked: is the rtnl_lock already held > + * > + * Set the napi instance for the queue. Caller indicates the lock status. > + */ > +static void > +__i40e_queue_set_napi(struct net_device *dev, unsigned int queue_index, > + enum netdev_queue_type type, struct napi_struct *napi, > + bool locked) > +{ > + if (!locked) > + rtnl_lock(); > + netif_queue_set_napi(dev, queue_index, type, napi); > + if (!locked) > + rtnl_unlock(); > +} > + > +/** > + * i40e_queue_set_napi - Set the napi instance for the queue > + * @vsi: VSI being configured > + * @queue_index: Index of queue > + * @type: queue type as RX or TX > + * @napi: NAPI context > + * > + * Set the napi instance for the queue. The rtnl lock state is derived from the > + * execution path. > + */ > +void > +i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, > + enum netdev_queue_type type, struct napi_struct *napi) > +{ > + struct i40e_pf *pf = vsi->back; > + > + if (!vsi->netdev) > + return; > + > + if (current_work() == &pf->service_task || > + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || I think we might need something like ICE_PREPARED_FOR_RESET which detects all kinds of resets(PFR/CORE/GLOBR). __I40E_PF_RESET_REQUESTED handles PFR only. So, this might assert for RTNL lock on CORER/GLOBR. > + test_bit(__I40E_DOWN, pf->state) || > + test_bit(__I40E_SUSPENDED, pf->state)) > + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > + false); > + else > + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > + true); > +} > + > /** > * i40e_configure_tx_ring - Configure a transmit ring context and rest > * @ring: The Tx ring to configure > @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring) > /* cache tail off for easier writes later */ > ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q); > > + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_TX, > + &ring->q_vector->napi); I am not sure very sure of this, have you tested this for the reset/rebuild path as well (example: ethtool -L and change queues). Just wondering if this path is taken for first time VSI init or additionally for any VSI rebuilds as well. > return 0; > } > > @@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) > ring->queue_index, pf_q); > } > > + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_RX, > + &ring->q_vector->napi); > Same as above. return 0; > } > > @@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) > q_vector->affinity_notify.notify = i40e_irq_affinity_notify; > q_vector->affinity_notify.release = i40e_irq_affinity_release; > irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify); > + netif_napi_set_irq(&q_vector->napi, q_vector->irq_num); > + > /* Spread affinity hints out across online CPUs. > * > * get_cpu_mask returns a static constant mask with > diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c > index 64d198ed166b..d380885ff26d 100644 > --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c > +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c > @@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring) > void i40e_free_tx_resources(struct i40e_ring *tx_ring) > { > i40e_clean_tx_ring(tx_ring); > + i40e_queue_set_napi(tx_ring->vsi, tx_ring->queue_index, > + NETDEV_QUEUE_TYPE_TX, NULL); > kfree(tx_ring->tx_bi); > tx_ring->tx_bi = NULL; > > @@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring) > void i40e_free_rx_resources(struct i40e_ring *rx_ring) > { > i40e_clean_rx_ring(rx_ring); > + i40e_queue_set_napi(rx_ring->vsi, rx_ring->queue_index, > + NETDEV_QUEUE_TYPE_RX, NULL); > if (rx_ring->vsi->type == I40E_VSI_MAIN) > xdp_rxq_info_unreg(&rx_ring->xdp_rxq); > rx_ring->xdp_prog = NULL;
On Wed, Apr 10, 2024 at 02:10:52AM -0700, Nambiar, Amritha wrote: > On 4/9/2024 9:39 PM, Joe Damato wrote: > > Make i40e compatible with the newly added netlink queue GET APIs. > > > > $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ > > --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}' > > > > {'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'} > > > > $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ > > --do napi-get --json '{"id": 162}' > > > > {'id': 162, 'ifindex': 3, 'irq': 136} > > > > The above output suggests that irq 136 was allocated for queue 1, which has > > a NAPI ID of 162. > > > > To double check this is correct, the IRQ to queue mapping can be verified > > by checking /proc/interrupts: > > > > $ cat /proc/interrupts | grep 136\: | \ > > awk '{print "irq: " $1 " name " $76}' > > > > irq: 136: name i40e-vlan300-TxRx-1 > > > > Suggests that queue 1 has IRQ 136, as expected. > > > > Signed-off-by: Joe Damato <jdamato@fastly.com> > > --- > > drivers/net/ethernet/intel/i40e/i40e.h | 2 + > > drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ > > drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ > > 3 files changed, 64 insertions(+) > > > > diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h > > index 2fbabcdb5bb5..5900ed5c7170 100644 > > --- a/drivers/net/ethernet/intel/i40e/i40e.h > > +++ b/drivers/net/ethernet/intel/i40e/i40e.h > > @@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); > > int i40e_open(struct net_device *netdev); > > int i40e_close(struct net_device *netdev); > > int i40e_vsi_open(struct i40e_vsi *vsi); > > +void i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, > > + enum netdev_queue_type type, struct napi_struct *napi); > > void i40e_vlan_stripping_disable(struct i40e_vsi *vsi); > > int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid); > > int i40e_vsi_add_vlan(struct i40e_vsi *vsi, u16 vid); > > diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c > > index 0bdcdea0be3e..6384a0c73a05 100644 > > --- a/drivers/net/ethernet/intel/i40e/i40e_main.c > > +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c > > @@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) > > return xsk_get_pool_from_qid(ring->vsi->netdev, qid); > > } > > +/** > > + * __i40e_queue_set_napi - Set the napi instance for the queue > > + * @dev: device to which NAPI and queue belong > > + * @queue_index: Index of queue > > + * @type: queue type as RX or TX > > + * @napi: NAPI context > > + * @locked: is the rtnl_lock already held > > + * > > + * Set the napi instance for the queue. Caller indicates the lock status. > > + */ > > +static void > > +__i40e_queue_set_napi(struct net_device *dev, unsigned int queue_index, > > + enum netdev_queue_type type, struct napi_struct *napi, > > + bool locked) > > +{ > > + if (!locked) > > + rtnl_lock(); > > + netif_queue_set_napi(dev, queue_index, type, napi); > > + if (!locked) > > + rtnl_unlock(); > > +} > > + > > +/** > > + * i40e_queue_set_napi - Set the napi instance for the queue > > + * @vsi: VSI being configured > > + * @queue_index: Index of queue > > + * @type: queue type as RX or TX > > + * @napi: NAPI context > > + * > > + * Set the napi instance for the queue. The rtnl lock state is derived from the > > + * execution path. > > + */ > > +void > > +i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, > > + enum netdev_queue_type type, struct napi_struct *napi) > > +{ > > + struct i40e_pf *pf = vsi->back; > > + > > + if (!vsi->netdev) > > + return; > > + > > + if (current_work() == &pf->service_task || > > + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || > > I think we might need something like ICE_PREPARED_FOR_RESET which detects > all kinds of resets(PFR/CORE/GLOBR). __I40E_PF_RESET_REQUESTED handles PFR > only. So, this might assert for RTNL lock on CORER/GLOBR. The i40e code is a bit tricky so I'm not sure about these cases. Here's what it looks like to me, but hopefully Intel can weigh-in here as well. As some one who is not an expert in i40e, what follows is a guess that is likely wrong ;) The __I40E_GLOBAL_RESET_REQUESTED case it looks to me (I could totally be wrong here) that the i40e_reset_subtask calls i40e_rebuild with lock_acquired = false. In this case, we want __i40e_queue_set_napi to pass locked = true (because i40e_rebuild will acquire the lock for us). The __I40E_CORE_RESET_REQUESTED case appears to be the same as the __I40E_GLOBAL_RESET_REQUESTED case in that i40e_rebuild is called with lock_acquired = false meaning we also want __i40e_queue_set_napi to pass locked = true (because i40e_rebuild will acquire the lock for us). __I40E_PF_RESET_REQUESTED is more complex. It seems: When the __I40E_PF_RESET_REQUESTED bit is set in: - i40e_handle_lldp_event - i40e_tx_timeout - i40e_intr - i40e_resume_port_tx - i40e_suspend_port_tx - i40e_hw_dcb_config then: i40e_service_event_schedule is called which queues i40e_service_task, which calls i40e_reset_subtask, which clears the __I40E_PF_RESET_REQUESTED bit and calls i40e_do_reset passing lock_acquired = false. In the __I40E_PF_RESET_REQUESTED case, i40e_reset_and_rebuild called with lock_acquired = false again and passed through to i40e_rebuild which will take rtnl on its own. This means in these cases, __i40e_queue_set_napi can pass locked = true. However... - i40e_set_features - i40e_ndo_bridge_setlink - i40e_create_queue_channel - i40e_configure_queue_channels - Error case in i40e_vsi_open call i40e_do_reset directly and pass lock_acquired = true so i40e_reset_and_rebuild will not take the RTNL. Important assumption: I assume that passing lock_acquired = true means that the lock really was previously acquired (and not simply unnecessary and not taken ?). If that is correct, then __i40e_queue_set_napi should also not take the rtnl (e.g. locked = true). Again, I could be totally off here, but it looks like when: (current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state) is true, we want to call __i40e_queue_set_napi with locked = true, and also all the other cases we want __i40e_queue_set_napi with locked = true > > + test_bit(__I40E_DOWN, pf->state) || > > + test_bit(__I40E_SUSPENDED, pf->state)) > > + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > > + false); > > + else > > + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > > + true); I *think* (but honestly... I have no idea) the correct if statement *might* be something like: /* __I40E_PF_RESET_REQUESTED via the service_task will * call i40e_rebuild with lock_acquired = false, causing rtnl to be * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_PF_RESET_REQUESTED when set directly and not via the * service task, i40e_reset is called with lock_acquired = true, * implying that the rtnl was already taken (and, more * specifically, the lock was not simply unnecessary and skipped) * and so __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED * trigger the service_task (via i40e_intr) which will cause * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should * not acquire it. */ if (current_work() == &pf->service_task || test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_DOWN, pf->state) || test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); I suppose to figure this out, I'd need to investigate all cases where i40e_rebuild is called with lock_acquired = true to ensure that the lock was actually acquired (and not just unnecessary). Unless some one who knows about i40e can answer this question more definitively. > > +} > > + > > /** > > * i40e_configure_tx_ring - Configure a transmit ring context and rest > > * @ring: The Tx ring to configure > > @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring) > > /* cache tail off for easier writes later */ > > ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q); > > + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_TX, > > + &ring->q_vector->napi); > > I am not sure very sure of this, have you tested this for the reset/rebuild > path as well (example: ethtool -L and change queues). Just wondering if this > path is taken for first time VSI init or additionally for any VSI rebuilds > as well. Can you explain more about what your concern is? I'm not sure I follow. Was the concern just that on rebuild this code path might not be executed because the driver might take a different path? If so, I traced the code (and tested with ethtool): When the device is probed: i40e_probe i40e_vsi_open i40e_vsi_configure i40e_vsi_configure_rx i40e_configure_rx_ring i40e_vsi_configure_tx i40e_configure_tx_ring When you use ethtool to change the channel count: i40e_set_channels i40e_reconfig_rss_queues i40e_reset_and_rebuild i40e_rebuild i40e_pf_unquiesce_all_vsi i40e_unquiesce_vsi i40e_vsi_open [.. the call stack above for i40e_vsi_open ..] Are those the two paths you had in mind or were there other ones? FWIW, using ethtool to change the channel count followed by using the cli.py returns what appears to be correct data, so I think the ethtool -L case is covered. Let me know if I am missing any cases you had in mind or if this answers your question. > > return 0; > > } > > @@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) > > ring->queue_index, pf_q); > > } > > + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_RX, > > + &ring->q_vector->napi); > > > Same as above. > > return 0; > > } > > @@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) > > q_vector->affinity_notify.notify = i40e_irq_affinity_notify; > > q_vector->affinity_notify.release = i40e_irq_affinity_release; > > irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify); > > + netif_napi_set_irq(&q_vector->napi, q_vector->irq_num); > > + > > /* Spread affinity hints out across online CPUs. > > * > > * get_cpu_mask returns a static constant mask with > > diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c > > index 64d198ed166b..d380885ff26d 100644 > > --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c > > +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c > > @@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring) > > void i40e_free_tx_resources(struct i40e_ring *tx_ring) > > { > > i40e_clean_tx_ring(tx_ring); > > + i40e_queue_set_napi(tx_ring->vsi, tx_ring->queue_index, > > + NETDEV_QUEUE_TYPE_TX, NULL); > > kfree(tx_ring->tx_bi); > > tx_ring->tx_bi = NULL; > > @@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring) > > void i40e_free_rx_resources(struct i40e_ring *rx_ring) > > { > > i40e_clean_rx_ring(rx_ring); > > + i40e_queue_set_napi(rx_ring->vsi, rx_ring->queue_index, > > + NETDEV_QUEUE_TYPE_RX, NULL); > > if (rx_ring->vsi->type == I40E_VSI_MAIN) > > xdp_rxq_info_unreg(&rx_ring->xdp_rxq); > > rx_ring->xdp_prog = NULL;
On 4/10/2024 4:43 PM, Joe Damato wrote: > On Wed, Apr 10, 2024 at 02:10:52AM -0700, Nambiar, Amritha wrote: >> On 4/9/2024 9:39 PM, Joe Damato wrote: >>> Make i40e compatible with the newly added netlink queue GET APIs. >>> >>> $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ >>> --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}' >>> >>> {'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'} >>> >>> $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ >>> --do napi-get --json '{"id": 162}' >>> >>> {'id': 162, 'ifindex': 3, 'irq': 136} >>> >>> The above output suggests that irq 136 was allocated for queue 1, which has >>> a NAPI ID of 162. >>> >>> To double check this is correct, the IRQ to queue mapping can be verified >>> by checking /proc/interrupts: >>> >>> $ cat /proc/interrupts | grep 136\: | \ >>> awk '{print "irq: " $1 " name " $76}' >>> >>> irq: 136: name i40e-vlan300-TxRx-1 >>> >>> Suggests that queue 1 has IRQ 136, as expected. >>> >>> Signed-off-by: Joe Damato <jdamato@fastly.com> >>> --- >>> drivers/net/ethernet/intel/i40e/i40e.h | 2 + >>> drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ >>> drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ >>> 3 files changed, 64 insertions(+) >>> >>> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h >>> index 2fbabcdb5bb5..5900ed5c7170 100644 >>> --- a/drivers/net/ethernet/intel/i40e/i40e.h >>> +++ b/drivers/net/ethernet/intel/i40e/i40e.h >>> @@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); >>> int i40e_open(struct net_device *netdev); >>> int i40e_close(struct net_device *netdev); >>> int i40e_vsi_open(struct i40e_vsi *vsi); >>> +void i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, >>> + enum netdev_queue_type type, struct napi_struct *napi); >>> void i40e_vlan_stripping_disable(struct i40e_vsi *vsi); >>> int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid); >>> int i40e_vsi_add_vlan(struct i40e_vsi *vsi, u16 vid); >>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c >>> index 0bdcdea0be3e..6384a0c73a05 100644 >>> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c >>> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c >>> @@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) >>> return xsk_get_pool_from_qid(ring->vsi->netdev, qid); >>> } >>> +/** >>> + * __i40e_queue_set_napi - Set the napi instance for the queue >>> + * @dev: device to which NAPI and queue belong >>> + * @queue_index: Index of queue >>> + * @type: queue type as RX or TX >>> + * @napi: NAPI context >>> + * @locked: is the rtnl_lock already held >>> + * >>> + * Set the napi instance for the queue. Caller indicates the lock status. >>> + */ >>> +static void >>> +__i40e_queue_set_napi(struct net_device *dev, unsigned int queue_index, >>> + enum netdev_queue_type type, struct napi_struct *napi, >>> + bool locked) >>> +{ >>> + if (!locked) >>> + rtnl_lock(); >>> + netif_queue_set_napi(dev, queue_index, type, napi); >>> + if (!locked) >>> + rtnl_unlock(); >>> +} >>> + >>> +/** >>> + * i40e_queue_set_napi - Set the napi instance for the queue >>> + * @vsi: VSI being configured >>> + * @queue_index: Index of queue >>> + * @type: queue type as RX or TX >>> + * @napi: NAPI context >>> + * >>> + * Set the napi instance for the queue. The rtnl lock state is derived from the >>> + * execution path. >>> + */ >>> +void >>> +i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, >>> + enum netdev_queue_type type, struct napi_struct *napi) >>> +{ >>> + struct i40e_pf *pf = vsi->back; >>> + >>> + if (!vsi->netdev) >>> + return; >>> + >>> + if (current_work() == &pf->service_task || >>> + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || >> >> I think we might need something like ICE_PREPARED_FOR_RESET which detects >> all kinds of resets(PFR/CORE/GLOBR). __I40E_PF_RESET_REQUESTED handles PFR >> only. So, this might assert for RTNL lock on CORER/GLOBR. > > The i40e code is a bit tricky so I'm not sure about these cases. Here's > what it looks like to me, but hopefully Intel can weigh-in here as well. > > As some one who is not an expert in i40e, what follows is a guess that is > likely wrong ;) > > The __I40E_GLOBAL_RESET_REQUESTED case it looks to me (I could totally > be wrong here) that the i40e_reset_subtask calls i40e_rebuild with > lock_acquired = false. In this case, we want __i40e_queue_set_napi to > pass locked = true (because i40e_rebuild will acquire the lock for us). > > The __I40E_CORE_RESET_REQUESTED case appears to be the same as the > __I40E_GLOBAL_RESET_REQUESTED case in that i40e_rebuild is called with > lock_acquired = false meaning we also want __i40e_queue_set_napi to pass > locked = true (because i40e_rebuild will acquire the lock for us). > > __I40E_PF_RESET_REQUESTED is more complex. > > It seems: > When the __I40E_PF_RESET_REQUESTED bit is set in: > - i40e_handle_lldp_event > - i40e_tx_timeout > - i40e_intr > - i40e_resume_port_tx > - i40e_suspend_port_tx > - i40e_hw_dcb_config > > then: i40e_service_event_schedule is called which queues > i40e_service_task, which calls i40e_reset_subtask, which > clears the __I40E_PF_RESET_REQUESTED bit and calls > i40e_do_reset passing lock_acquired = false. In the > __I40E_PF_RESET_REQUESTED case, i40e_reset_and_rebuild > called with lock_acquired = false again and passed through to > i40e_rebuild which will take rtnl on its own. This means > in these cases, __i40e_queue_set_napi can pass locked = true. > > However... > > - i40e_set_features > - i40e_ndo_bridge_setlink > - i40e_create_queue_channel > - i40e_configure_queue_channels > - Error case in i40e_vsi_open > > call i40e_do_reset directly and pass lock_acquired = true so > i40e_reset_and_rebuild will not take the RTNL. > > Important assumption: I assume that passing lock_acquired = true > means that the lock really was previously acquired (and not simply > unnecessary and not taken ?). > > If that is correct, then __i40e_queue_set_napi should also not take the rtnl (e.g. > locked = true). > > Again, I could be totally off here, but it looks like when: > > (current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state) > > is true, we want to call __i40e_queue_set_napi with locked = true, > > and also all the other cases we want __i40e_queue_set_napi with locked = true > >>> + test_bit(__I40E_DOWN, pf->state) || >>> + test_bit(__I40E_SUSPENDED, pf->state)) >>> + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, >>> + false); >>> + else >>> + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, >>> + true); > > I *think* (but honestly... I have no idea) the correct if statement *might* be > something like: > > /* __I40E_PF_RESET_REQUESTED via the service_task will > * call i40e_rebuild with lock_acquired = false, causing rtnl to be > * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. > * > * __I40E_PF_RESET_REQUESTED when set directly and not via the > * service task, i40e_reset is called with lock_acquired = true, > * implying that the rtnl was already taken (and, more > * specifically, the lock was not simply unnecessary and skipped) > * and so __i40e_queue_set_napi should *NOT* take the lock. > * > * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED > * trigger the service_task (via i40e_intr) which will cause > * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should > * not acquire it. > */ > if (current_work() == &pf->service_task || > test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || > test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || > test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > true); > else if (test_bit(__I40E_DOWN, pf->state) || > test_bit(__I40E_SUSPENDED, pf->state)) > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > false); > else > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > true); > > I suppose to figure this out, I'd need to investigate all cases where > i40e_rebuild is called with lock_acquired = true to ensure that the lock was > actually acquired (and not just unnecessary). > > Unless some one who knows about i40e can answer this question more > definitively. > I'll wait for the i40e maintainers to chime in here. >>> +} >>> + >>> /** >>> * i40e_configure_tx_ring - Configure a transmit ring context and rest >>> * @ring: The Tx ring to configure >>> @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring) >>> /* cache tail off for easier writes later */ >>> ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q); >>> + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_TX, >>> + &ring->q_vector->napi); >> >> I am not sure very sure of this, have you tested this for the reset/rebuild >> path as well (example: ethtool -L and change queues). Just wondering if this >> path is taken for first time VSI init or additionally for any VSI rebuilds >> as well. > > Can you explain more about what your concern is? I'm not sure I follow. > Was the concern just that on rebuild this code path might not be > executed because the driver might take a different path? > > If so, I traced the code (and tested with ethtool): > > When the device is probed: > > i40e_probe > i40e_vsi_open > i40e_vsi_configure > i40e_vsi_configure_rx > i40e_configure_rx_ring > i40e_vsi_configure_tx > i40e_configure_tx_ring > > When you use ethtool to change the channel count: > > i40e_set_channels > i40e_reconfig_rss_queues > i40e_reset_and_rebuild > i40e_rebuild > i40e_pf_unquiesce_all_vsi > i40e_unquiesce_vsi > i40e_vsi_open > [.. the call stack above for i40e_vsi_open ..] > > Are those the two paths you had in mind or were there other ones? FWIW, using > ethtool to change the channel count followed by using the cli.py returns what > appears to be correct data, so I think the ethtool -L case is covered. > Yes, this is what I had mind. Good to know that it is covered. > Let me know if I am missing any cases you had in mind or if this answers your > question. > One other case was the suspend/resume callback. This path involves remapping vectors and rings (just like rebuild after changing channels), If this takes the i40e_rebuild path like before, then we are covered, as your changes are in i40e_vsi_configure. If not, we'll have to add it after re-initializing interrupt scheme . >>> return 0; >>> } >>> @@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) >>> ring->queue_index, pf_q); >>> } >>> + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_RX, >>> + &ring->q_vector->napi); >>> >> Same as above. >> >> return 0; >>> } >>> @@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) >>> q_vector->affinity_notify.notify = i40e_irq_affinity_notify; >>> q_vector->affinity_notify.release = i40e_irq_affinity_release; >>> irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify); >>> + netif_napi_set_irq(&q_vector->napi, q_vector->irq_num); >>> + >>> /* Spread affinity hints out across online CPUs. >>> * >>> * get_cpu_mask returns a static constant mask with >>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c >>> index 64d198ed166b..d380885ff26d 100644 >>> --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c >>> +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c >>> @@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring) >>> void i40e_free_tx_resources(struct i40e_ring *tx_ring) >>> { >>> i40e_clean_tx_ring(tx_ring); >>> + i40e_queue_set_napi(tx_ring->vsi, tx_ring->queue_index, >>> + NETDEV_QUEUE_TYPE_TX, NULL); >>> kfree(tx_ring->tx_bi); >>> tx_ring->tx_bi = NULL; >>> @@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring) >>> void i40e_free_rx_resources(struct i40e_ring *rx_ring) >>> { >>> i40e_clean_rx_ring(rx_ring); >>> + i40e_queue_set_napi(rx_ring->vsi, rx_ring->queue_index, >>> + NETDEV_QUEUE_TYPE_RX, NULL); >>> if (rx_ring->vsi->type == I40E_VSI_MAIN) >>> xdp_rxq_info_unreg(&rx_ring->xdp_rxq); >>> rx_ring->xdp_prog = NULL;
On Thu, Apr 11, 2024 at 04:02:37PM -0700, Nambiar, Amritha wrote: > On 4/10/2024 4:43 PM, Joe Damato wrote: > > On Wed, Apr 10, 2024 at 02:10:52AM -0700, Nambiar, Amritha wrote: > > > On 4/9/2024 9:39 PM, Joe Damato wrote: > > > > Make i40e compatible with the newly added netlink queue GET APIs. > > > > > > > > $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ > > > > --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}' > > > > > > > > {'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'} > > > > > > > > $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ > > > > --do napi-get --json '{"id": 162}' > > > > > > > > {'id': 162, 'ifindex': 3, 'irq': 136} > > > > > > > > The above output suggests that irq 136 was allocated for queue 1, which has > > > > a NAPI ID of 162. > > > > > > > > To double check this is correct, the IRQ to queue mapping can be verified > > > > by checking /proc/interrupts: > > > > > > > > $ cat /proc/interrupts | grep 136\: | \ > > > > awk '{print "irq: " $1 " name " $76}' > > > > > > > > irq: 136: name i40e-vlan300-TxRx-1 > > > > > > > > Suggests that queue 1 has IRQ 136, as expected. > > > > > > > > Signed-off-by: Joe Damato <jdamato@fastly.com> > > > > --- > > > > drivers/net/ethernet/intel/i40e/i40e.h | 2 + > > > > drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ > > > > drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ > > > > 3 files changed, 64 insertions(+) > > > > > > > > diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h > > > > index 2fbabcdb5bb5..5900ed5c7170 100644 > > > > --- a/drivers/net/ethernet/intel/i40e/i40e.h > > > > +++ b/drivers/net/ethernet/intel/i40e/i40e.h > > > > @@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); > > > > int i40e_open(struct net_device *netdev); > > > > int i40e_close(struct net_device *netdev); > > > > int i40e_vsi_open(struct i40e_vsi *vsi); > > > > +void i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, > > > > + enum netdev_queue_type type, struct napi_struct *napi); > > > > void i40e_vlan_stripping_disable(struct i40e_vsi *vsi); > > > > int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid); > > > > int i40e_vsi_add_vlan(struct i40e_vsi *vsi, u16 vid); > > > > diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c > > > > index 0bdcdea0be3e..6384a0c73a05 100644 > > > > --- a/drivers/net/ethernet/intel/i40e/i40e_main.c > > > > +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c > > > > @@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) > > > > return xsk_get_pool_from_qid(ring->vsi->netdev, qid); > > > > } > > > > +/** > > > > + * __i40e_queue_set_napi - Set the napi instance for the queue > > > > + * @dev: device to which NAPI and queue belong > > > > + * @queue_index: Index of queue > > > > + * @type: queue type as RX or TX > > > > + * @napi: NAPI context > > > > + * @locked: is the rtnl_lock already held > > > > + * > > > > + * Set the napi instance for the queue. Caller indicates the lock status. > > > > + */ > > > > +static void > > > > +__i40e_queue_set_napi(struct net_device *dev, unsigned int queue_index, > > > > + enum netdev_queue_type type, struct napi_struct *napi, > > > > + bool locked) > > > > +{ > > > > + if (!locked) > > > > + rtnl_lock(); > > > > + netif_queue_set_napi(dev, queue_index, type, napi); > > > > + if (!locked) > > > > + rtnl_unlock(); > > > > +} > > > > + > > > > +/** > > > > + * i40e_queue_set_napi - Set the napi instance for the queue > > > > + * @vsi: VSI being configured > > > > + * @queue_index: Index of queue > > > > + * @type: queue type as RX or TX > > > > + * @napi: NAPI context > > > > + * > > > > + * Set the napi instance for the queue. The rtnl lock state is derived from the > > > > + * execution path. > > > > + */ > > > > +void > > > > +i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, > > > > + enum netdev_queue_type type, struct napi_struct *napi) > > > > +{ > > > > + struct i40e_pf *pf = vsi->back; > > > > + > > > > + if (!vsi->netdev) > > > > + return; > > > > + > > > > + if (current_work() == &pf->service_task || > > > > + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || > > > > > > I think we might need something like ICE_PREPARED_FOR_RESET which detects > > > all kinds of resets(PFR/CORE/GLOBR). __I40E_PF_RESET_REQUESTED handles PFR > > > only. So, this might assert for RTNL lock on CORER/GLOBR. > > > > The i40e code is a bit tricky so I'm not sure about these cases. Here's > > what it looks like to me, but hopefully Intel can weigh-in here as well. > > > > As some one who is not an expert in i40e, what follows is a guess that is > > likely wrong ;) > > > > The __I40E_GLOBAL_RESET_REQUESTED case it looks to me (I could totally > > be wrong here) that the i40e_reset_subtask calls i40e_rebuild with > > lock_acquired = false. In this case, we want __i40e_queue_set_napi to > > pass locked = true (because i40e_rebuild will acquire the lock for us). > > > > The __I40E_CORE_RESET_REQUESTED case appears to be the same as the > > __I40E_GLOBAL_RESET_REQUESTED case in that i40e_rebuild is called with > > lock_acquired = false meaning we also want __i40e_queue_set_napi to pass > > locked = true (because i40e_rebuild will acquire the lock for us). > > > > __I40E_PF_RESET_REQUESTED is more complex. > > > > It seems: > > When the __I40E_PF_RESET_REQUESTED bit is set in: > > - i40e_handle_lldp_event > > - i40e_tx_timeout > > - i40e_intr > > - i40e_resume_port_tx > > - i40e_suspend_port_tx > > - i40e_hw_dcb_config > > > > then: i40e_service_event_schedule is called which queues > > i40e_service_task, which calls i40e_reset_subtask, which > > clears the __I40E_PF_RESET_REQUESTED bit and calls > > i40e_do_reset passing lock_acquired = false. In the > > __I40E_PF_RESET_REQUESTED case, i40e_reset_and_rebuild > > called with lock_acquired = false again and passed through to > > i40e_rebuild which will take rtnl on its own. This means > > in these cases, __i40e_queue_set_napi can pass locked = true. > > > > However... > > > > - i40e_set_features > > - i40e_ndo_bridge_setlink > > - i40e_create_queue_channel > > - i40e_configure_queue_channels > > - Error case in i40e_vsi_open > > > > call i40e_do_reset directly and pass lock_acquired = true so > > i40e_reset_and_rebuild will not take the RTNL. > > > > Important assumption: I assume that passing lock_acquired = true > > means that the lock really was previously acquired (and not simply > > unnecessary and not taken ?). > > > > If that is correct, then __i40e_queue_set_napi should also not take the rtnl (e.g. > > locked = true). > > > > Again, I could be totally off here, but it looks like when: > > > > (current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state) > > > > is true, we want to call __i40e_queue_set_napi with locked = true, > > > > and also all the other cases we want __i40e_queue_set_napi with locked = true > > > > > > + test_bit(__I40E_DOWN, pf->state) || > > > > + test_bit(__I40E_SUSPENDED, pf->state)) > > > > + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > > > > + false); > > > > + else > > > > + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > > > > + true); > > > > I *think* (but honestly... I have no idea) the correct if statement *might* be > > something like: > > > > /* __I40E_PF_RESET_REQUESTED via the service_task will > > * call i40e_rebuild with lock_acquired = false, causing rtnl to be > > * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. > > * > > * __I40E_PF_RESET_REQUESTED when set directly and not via the > > * service task, i40e_reset is called with lock_acquired = true, > > * implying that the rtnl was already taken (and, more > > * specifically, the lock was not simply unnecessary and skipped) > > * and so __i40e_queue_set_napi should *NOT* take the lock. > > * > > * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED > > * trigger the service_task (via i40e_intr) which will cause > > * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should > > * not acquire it. > > */ > > if (current_work() == &pf->service_task || > > test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || > > test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || > > test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) > > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > > true); > > else if (test_bit(__I40E_DOWN, pf->state) || > > test_bit(__I40E_SUSPENDED, pf->state)) > > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > > false); > > else > > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > > true); > > > > I suppose to figure this out, I'd need to investigate all cases where > > i40e_rebuild is called with lock_acquired = true to ensure that the lock was > > actually acquired (and not just unnecessary). > > > > Unless some one who knows about i40e can answer this question more > > definitively. > > > > I'll wait for the i40e maintainers to chime in here. Based on the findings of I40E_SUSPENDED below, the above if statement is still slightly incorrect, please see below. > > > > +} > > > > + > > > > /** > > > > * i40e_configure_tx_ring - Configure a transmit ring context and rest > > > > * @ring: The Tx ring to configure > > > > @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring) > > > > /* cache tail off for easier writes later */ > > > > ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q); > > > > + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_TX, > > > > + &ring->q_vector->napi); > > > > > > I am not sure very sure of this, have you tested this for the reset/rebuild > > > path as well (example: ethtool -L and change queues). Just wondering if this > > > path is taken for first time VSI init or additionally for any VSI rebuilds > > > as well. > > > > Can you explain more about what your concern is? I'm not sure I follow. > > Was the concern just that on rebuild this code path might not be > > executed because the driver might take a different path? > > > > If so, I traced the code (and tested with ethtool): > > > > When the device is probed: > > > > i40e_probe > > i40e_vsi_open > > i40e_vsi_configure > > i40e_vsi_configure_rx > > i40e_configure_rx_ring > > i40e_vsi_configure_tx > > i40e_configure_tx_ring > > > > When you use ethtool to change the channel count: > > > > i40e_set_channels > > i40e_reconfig_rss_queues > > i40e_reset_and_rebuild > > i40e_rebuild > > i40e_pf_unquiesce_all_vsi > > i40e_unquiesce_vsi > > i40e_vsi_open > > [.. the call stack above for i40e_vsi_open ..] > > > > Are those the two paths you had in mind or were there other ones? FWIW, using > > ethtool to change the channel count followed by using the cli.py returns what > > appears to be correct data, so I think the ethtool -L case is covered. > > > > Yes, this is what I had mind. Good to know that it is covered. Thanks for the thorough review; I appreciate your insight. The more I look at the i40e code paths, the more I realize that it is much trickier than I originally thought. > > Let me know if I am missing any cases you had in mind or if this answers your > > question. > > > > One other case was the suspend/resume callback. This path involves remapping > vectors and rings (just like rebuild after changing channels), If this takes > the i40e_rebuild path like before, then we are covered, as your changes are > in i40e_vsi_configure. If not, we'll have to add it after re-initializing > interrupt scheme . Here's what I see in this path, namely that i40e_suspend does not call i40e_queue_set_napi but sets appropriate bits that can be checked. i40e_suspend: __I40E_DOWN is set __I40E_SUSPENDED is set rtnl_lock i40e_clear_interrupt_scheme i40e_vsi_free_q_vectors i40e_free_q_vector rtnl_unlock It seems in the suspend case the i40e_free_rx_resources and i40e_free_tx_resources are not called. This means I probably missed a case and need to call i40e_queue_set_napi to set the NAPI mapping to NULL somewhere in here without calling it twice. See further below for my thoughts on this. Continuing with resume, though: i40e_resume: rtnl_lock i40e_restore_interrupt_scheme i40e_vsi_alloc_q_vectors i40e_vsi_alloc_q_vector __I40E_DOWN is cleared i40e_reset_and_rebuild (passes lock_acquired = true) i40e_rebuild (passes locked_acquired = true) rtnl_unlock __I40E_SUSPENDED is cleared So, in this case i40e_resume would want to to call __i40e_queue_set_napi with locked = true, to avoid rtnl since it's already been taken. I think to cover this case __I40E_SUSPENDED needs to be checked but true can be passed to the helper to avoid taking rtnl in the helper. This is an adjusted if statement, which is likely still incorrect in some cases (especially when considering my comments below on the i40e_free_[rt]x_resource paths), but maybe getting slightly closer: /* __I40E_PF_RESET_REQUESTED via the service_task will * call i40e_rebuild with lock_acquired = false, causing rtnl to be * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_PF_RESET_REQUESTED when set directly and not via the * service task, i40e_reset is called with lock_acquired = true, * implying that the rtnl was already taken (and, more * specifically, the lock was not simply unnecessary and skipped) * and so __i40e_queue_set_napi should *NOT* take the lock. * * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED * trigger the service_task (via i40e_intr) which will cause * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should * not acquire it. * * __I40E_SUSPENDED is set in i40e_suspend and cleared in i40e_resume * after rtnl_lock + i40_rebuild (with lock_acquired = true). In * i40e_resume's call to i40e_rebuild, rtnl is held so * __i40e_queue_set_napi should not take the lock, either. * * __I40E_IN_REMOVE is set in i40e_remove, and freeing the tx/rx * resources will trigger this path. In this case, rtnl will not be held, * so locked=false must be passed to the helper. * * __I40E_DOWN is set in a few places: i40e_probe, i40e_remove, * i40e_shutdown, i40e_suspend. It is only cleared in i40e_probe after * the vsi_open path is taken (in this case rtnl is needed) and it is * cleared in i40e_resume, where RTNL is not needed, but the i40e_resume * case is handled by checking __I40E_SUSPENDED in the first if block. */ if (current_work() == &pf->service_task || test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || test_bit(__I40E_CORE_RESET_REQUESTED, pf->state) | test_bit(__I40E_SUSPENDED, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); else if (test_bit(__I40E_IN_REMOVE, pf->state) || test_bit(__I40E_DOWN, pf->state)) __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, false); else __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, true); But please see below about i40e_free_q_vector. > > > > return 0; > > > > } > > > > @@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) > > > > ring->queue_index, pf_q); > > > > } > > > > + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_RX, > > > > + &ring->q_vector->napi); > > > > > > > Same as above. > > > > > > return 0; > > > > } > > > > @@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) > > > > q_vector->affinity_notify.notify = i40e_irq_affinity_notify; > > > > q_vector->affinity_notify.release = i40e_irq_affinity_release; > > > > irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify); > > > > + netif_napi_set_irq(&q_vector->napi, q_vector->irq_num); > > > > + > > > > /* Spread affinity hints out across online CPUs. > > > > * > > > > * get_cpu_mask returns a static constant mask with > > > > diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c > > > > index 64d198ed166b..d380885ff26d 100644 > > > > --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c > > > > +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c > > > > @@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring) > > > > void i40e_free_tx_resources(struct i40e_ring *tx_ring) > > > > { > > > > i40e_clean_tx_ring(tx_ring); > > > > + i40e_queue_set_napi(tx_ring->vsi, tx_ring->queue_index, > > > > + NETDEV_QUEUE_TYPE_TX, NULL); > > > > kfree(tx_ring->tx_bi); > > > > tx_ring->tx_bi = NULL; > > > > @@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring) > > > > void i40e_free_rx_resources(struct i40e_ring *rx_ring) > > > > { > > > > i40e_clean_rx_ring(rx_ring); > > > > + i40e_queue_set_napi(rx_ring->vsi, rx_ring->queue_index, > > > > + NETDEV_QUEUE_TYPE_RX, NULL); It appears to me that some cases may not end up calling i40e_free_tx_resources or i40e_free_rx_resources, but most (or all?) cases do call i40e_free_q_vector which is where the NAPI is deleted. It probably makes more sense to put the NULL setting where the NAPI delete happens, and then check those paths to see where rtnl is taken and make sure the bit checking in the if statement lines up properly. Before I go any deeper down this rabbit hole, I'll wait to see what the i40e maintainers say / think about this. > > > > if (rx_ring->vsi->type == I40E_VSI_MAIN) > > > > xdp_rxq_info_unreg(&rx_ring->xdp_rxq); > > > > rx_ring->xdp_prog = NULL;
On 4/13/2024 12:24 PM, Joe Damato wrote: > On Thu, Apr 11, 2024 at 04:02:37PM -0700, Nambiar, Amritha wrote: >> On 4/10/2024 4:43 PM, Joe Damato wrote: >>> On Wed, Apr 10, 2024 at 02:10:52AM -0700, Nambiar, Amritha wrote: >>>> On 4/9/2024 9:39 PM, Joe Damato wrote: >>>>> Make i40e compatible with the newly added netlink queue GET APIs. >>>>> >>>>> $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ >>>>> --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}' >>>>> >>>>> {'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'} >>>>> >>>>> $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ >>>>> --do napi-get --json '{"id": 162}' >>>>> >>>>> {'id': 162, 'ifindex': 3, 'irq': 136} >>>>> >>>>> The above output suggests that irq 136 was allocated for queue 1, which has >>>>> a NAPI ID of 162. >>>>> >>>>> To double check this is correct, the IRQ to queue mapping can be verified >>>>> by checking /proc/interrupts: >>>>> >>>>> $ cat /proc/interrupts | grep 136\: | \ >>>>> awk '{print "irq: " $1 " name " $76}' >>>>> >>>>> irq: 136: name i40e-vlan300-TxRx-1 >>>>> >>>>> Suggests that queue 1 has IRQ 136, as expected. >>>>> >>>>> Signed-off-by: Joe Damato <jdamato@fastly.com> >>>>> --- >>>>> drivers/net/ethernet/intel/i40e/i40e.h | 2 + >>>>> drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ >>>>> drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ >>>>> 3 files changed, 64 insertions(+) >>>>> >>>>> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h >>>>> index 2fbabcdb5bb5..5900ed5c7170 100644 >>>>> --- a/drivers/net/ethernet/intel/i40e/i40e.h >>>>> +++ b/drivers/net/ethernet/intel/i40e/i40e.h >>>>> @@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); >>>>> int i40e_open(struct net_device *netdev); >>>>> int i40e_close(struct net_device *netdev); >>>>> int i40e_vsi_open(struct i40e_vsi *vsi); >>>>> +void i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, >>>>> + enum netdev_queue_type type, struct napi_struct *napi); >>>>> void i40e_vlan_stripping_disable(struct i40e_vsi *vsi); >>>>> int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid); >>>>> int i40e_vsi_add_vlan(struct i40e_vsi *vsi, u16 vid); >>>>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c >>>>> index 0bdcdea0be3e..6384a0c73a05 100644 >>>>> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c >>>>> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c >>>>> @@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) >>>>> return xsk_get_pool_from_qid(ring->vsi->netdev, qid); >>>>> } >>>>> +/** >>>>> + * __i40e_queue_set_napi - Set the napi instance for the queue >>>>> + * @dev: device to which NAPI and queue belong >>>>> + * @queue_index: Index of queue >>>>> + * @type: queue type as RX or TX >>>>> + * @napi: NAPI context >>>>> + * @locked: is the rtnl_lock already held >>>>> + * >>>>> + * Set the napi instance for the queue. Caller indicates the lock status. >>>>> + */ >>>>> +static void >>>>> +__i40e_queue_set_napi(struct net_device *dev, unsigned int queue_index, >>>>> + enum netdev_queue_type type, struct napi_struct *napi, >>>>> + bool locked) >>>>> +{ >>>>> + if (!locked) >>>>> + rtnl_lock(); >>>>> + netif_queue_set_napi(dev, queue_index, type, napi); >>>>> + if (!locked) >>>>> + rtnl_unlock(); >>>>> +} >>>>> + >>>>> +/** >>>>> + * i40e_queue_set_napi - Set the napi instance for the queue >>>>> + * @vsi: VSI being configured >>>>> + * @queue_index: Index of queue >>>>> + * @type: queue type as RX or TX >>>>> + * @napi: NAPI context >>>>> + * >>>>> + * Set the napi instance for the queue. The rtnl lock state is derived from the >>>>> + * execution path. >>>>> + */ >>>>> +void >>>>> +i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, >>>>> + enum netdev_queue_type type, struct napi_struct *napi) >>>>> +{ >>>>> + struct i40e_pf *pf = vsi->back; >>>>> + >>>>> + if (!vsi->netdev) >>>>> + return; >>>>> + >>>>> + if (current_work() == &pf->service_task || >>>>> + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || >>>> >>>> I think we might need something like ICE_PREPARED_FOR_RESET which detects >>>> all kinds of resets(PFR/CORE/GLOBR). __I40E_PF_RESET_REQUESTED handles PFR >>>> only. So, this might assert for RTNL lock on CORER/GLOBR. >>> >>> The i40e code is a bit tricky so I'm not sure about these cases. Here's >>> what it looks like to me, but hopefully Intel can weigh-in here as well. >>> >>> As some one who is not an expert in i40e, what follows is a guess that is >>> likely wrong ;) >>> >>> The __I40E_GLOBAL_RESET_REQUESTED case it looks to me (I could totally >>> be wrong here) that the i40e_reset_subtask calls i40e_rebuild with >>> lock_acquired = false. In this case, we want __i40e_queue_set_napi to >>> pass locked = true (because i40e_rebuild will acquire the lock for us). >>> >>> The __I40E_CORE_RESET_REQUESTED case appears to be the same as the >>> __I40E_GLOBAL_RESET_REQUESTED case in that i40e_rebuild is called with >>> lock_acquired = false meaning we also want __i40e_queue_set_napi to pass >>> locked = true (because i40e_rebuild will acquire the lock for us). >>> >>> __I40E_PF_RESET_REQUESTED is more complex. >>> >>> It seems: >>> When the __I40E_PF_RESET_REQUESTED bit is set in: >>> - i40e_handle_lldp_event >>> - i40e_tx_timeout >>> - i40e_intr >>> - i40e_resume_port_tx >>> - i40e_suspend_port_tx >>> - i40e_hw_dcb_config >>> >>> then: i40e_service_event_schedule is called which queues >>> i40e_service_task, which calls i40e_reset_subtask, which >>> clears the __I40E_PF_RESET_REQUESTED bit and calls >>> i40e_do_reset passing lock_acquired = false. In the >>> __I40E_PF_RESET_REQUESTED case, i40e_reset_and_rebuild >>> called with lock_acquired = false again and passed through to >>> i40e_rebuild which will take rtnl on its own. This means >>> in these cases, __i40e_queue_set_napi can pass locked = true. >>> >>> However... >>> >>> - i40e_set_features >>> - i40e_ndo_bridge_setlink >>> - i40e_create_queue_channel >>> - i40e_configure_queue_channels >>> - Error case in i40e_vsi_open >>> >>> call i40e_do_reset directly and pass lock_acquired = true so >>> i40e_reset_and_rebuild will not take the RTNL. >>> >>> Important assumption: I assume that passing lock_acquired = true >>> means that the lock really was previously acquired (and not simply >>> unnecessary and not taken ?). >>> >>> If that is correct, then __i40e_queue_set_napi should also not take the rtnl (e.g. >>> locked = true). >>> >>> Again, I could be totally off here, but it looks like when: >>> >>> (current_work() == &pf->service_task) && test_bit(__I40E_PF_RESET_REQUESTED, pf->state) >>> >>> is true, we want to call __i40e_queue_set_napi with locked = true, >>> >>> and also all the other cases we want __i40e_queue_set_napi with locked = true >>> >>>>> + test_bit(__I40E_DOWN, pf->state) || >>>>> + test_bit(__I40E_SUSPENDED, pf->state)) >>>>> + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, >>>>> + false); >>>>> + else >>>>> + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, >>>>> + true); >>> >>> I *think* (but honestly... I have no idea) the correct if statement *might* be >>> something like: >>> >>> /* __I40E_PF_RESET_REQUESTED via the service_task will >>> * call i40e_rebuild with lock_acquired = false, causing rtnl to be >>> * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. >>> * >>> * __I40E_PF_RESET_REQUESTED when set directly and not via the >>> * service task, i40e_reset is called with lock_acquired = true, >>> * implying that the rtnl was already taken (and, more >>> * specifically, the lock was not simply unnecessary and skipped) >>> * and so __i40e_queue_set_napi should *NOT* take the lock. >>> * >>> * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED >>> * trigger the service_task (via i40e_intr) which will cause >>> * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should >>> * not acquire it. >>> */ >>> if (current_work() == &pf->service_task || >>> test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || >>> test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || >>> test_bit(__I40E_CORE_RESET_REQUESTED, pf->state)) >>> __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, >>> true); >>> else if (test_bit(__I40E_DOWN, pf->state) || >>> test_bit(__I40E_SUSPENDED, pf->state)) >>> __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, >>> false); >>> else >>> __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, >>> true); >>> >>> I suppose to figure this out, I'd need to investigate all cases where >>> i40e_rebuild is called with lock_acquired = true to ensure that the lock was >>> actually acquired (and not just unnecessary). >>> >>> Unless some one who knows about i40e can answer this question more >>> definitively. >>> >> >> I'll wait for the i40e maintainers to chime in here. > > Based on the findings of I40E_SUSPENDED below, the above if statement is > still slightly incorrect, please see below. > >>>>> +} >>>>> + >>>>> /** >>>>> * i40e_configure_tx_ring - Configure a transmit ring context and rest >>>>> * @ring: The Tx ring to configure >>>>> @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring) >>>>> /* cache tail off for easier writes later */ >>>>> ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q); >>>>> + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_TX, >>>>> + &ring->q_vector->napi); >>>> >>>> I am not sure very sure of this, have you tested this for the reset/rebuild >>>> path as well (example: ethtool -L and change queues). Just wondering if this >>>> path is taken for first time VSI init or additionally for any VSI rebuilds >>>> as well. >>> >>> Can you explain more about what your concern is? I'm not sure I follow. >>> Was the concern just that on rebuild this code path might not be >>> executed because the driver might take a different path? >>> >>> If so, I traced the code (and tested with ethtool): >>> >>> When the device is probed: >>> >>> i40e_probe >>> i40e_vsi_open >>> i40e_vsi_configure >>> i40e_vsi_configure_rx >>> i40e_configure_rx_ring >>> i40e_vsi_configure_tx >>> i40e_configure_tx_ring >>> >>> When you use ethtool to change the channel count: >>> >>> i40e_set_channels >>> i40e_reconfig_rss_queues >>> i40e_reset_and_rebuild >>> i40e_rebuild >>> i40e_pf_unquiesce_all_vsi >>> i40e_unquiesce_vsi >>> i40e_vsi_open >>> [.. the call stack above for i40e_vsi_open ..] >>> >>> Are those the two paths you had in mind or were there other ones? FWIW, using >>> ethtool to change the channel count followed by using the cli.py returns what >>> appears to be correct data, so I think the ethtool -L case is covered. >>> >> >> Yes, this is what I had mind. Good to know that it is covered. > > Thanks for the thorough review; I appreciate your insight. The more I look > at the i40e code paths, the more I realize that it is much trickier than I > originally thought. > >>> Let me know if I am missing any cases you had in mind or if this answers your >>> question. >>> >> >> One other case was the suspend/resume callback. This path involves remapping >> vectors and rings (just like rebuild after changing channels), If this takes >> the i40e_rebuild path like before, then we are covered, as your changes are >> in i40e_vsi_configure. If not, we'll have to add it after re-initializing >> interrupt scheme . > > Here's what I see in this path, namely that i40e_suspend does not call > i40e_queue_set_napi but sets appropriate bits that can be checked. > > i40e_suspend: > __I40E_DOWN is set > __I40E_SUSPENDED is set > rtnl_lock > i40e_clear_interrupt_scheme > i40e_vsi_free_q_vectors > i40e_free_q_vector > rtnl_unlock > > It seems in the suspend case the i40e_free_rx_resources and > i40e_free_tx_resources are not called. This means I probably missed a case > and need to call i40e_queue_set_napi to set the NAPI mapping to NULL > somewhere in here without calling it twice. See further below for my > thoughts on this. > > Continuing with resume, though: > > i40e_resume: > rtnl_lock > i40e_restore_interrupt_scheme > i40e_vsi_alloc_q_vectors > i40e_vsi_alloc_q_vector > __I40E_DOWN is cleared > i40e_reset_and_rebuild (passes lock_acquired = true) > i40e_rebuild (passes locked_acquired = true) > rtnl_unlock > __I40E_SUSPENDED is cleared > > So, in this case i40e_resume would want to to call __i40e_queue_set_napi > with locked = true, to avoid rtnl since it's already been taken. I think to > cover this case __I40E_SUSPENDED needs to be checked but true can be passed > to the helper to avoid taking rtnl in the helper. > > This is an adjusted if statement, which is likely still incorrect in some > cases (especially when considering my comments below on the > i40e_free_[rt]x_resource paths), but maybe getting slightly closer: > > /* __I40E_PF_RESET_REQUESTED via the service_task will > * call i40e_rebuild with lock_acquired = false, causing rtnl to be > * taken, meaning __i40e_queue_set_napi should *NOT* take the lock. > * > * __I40E_PF_RESET_REQUESTED when set directly and not via the > * service task, i40e_reset is called with lock_acquired = true, > * implying that the rtnl was already taken (and, more > * specifically, the lock was not simply unnecessary and skipped) > * and so __i40e_queue_set_napi should *NOT* take the lock. > * > * __I40E_GLOBAL_RESET_REQUESTED and __I40E_CORE_RESET_REQUESTED > * trigger the service_task (via i40e_intr) which will cause > * i40e_rebuild to acquire rtnl and so __i40e_queue_set_napi should > * not acquire it. > * > * __I40E_SUSPENDED is set in i40e_suspend and cleared in i40e_resume > * after rtnl_lock + i40_rebuild (with lock_acquired = true). In > * i40e_resume's call to i40e_rebuild, rtnl is held so > * __i40e_queue_set_napi should not take the lock, either. > * > * __I40E_IN_REMOVE is set in i40e_remove, and freeing the tx/rx > * resources will trigger this path. In this case, rtnl will not be held, > * so locked=false must be passed to the helper. > * > * __I40E_DOWN is set in a few places: i40e_probe, i40e_remove, > * i40e_shutdown, i40e_suspend. It is only cleared in i40e_probe after > * the vsi_open path is taken (in this case rtnl is needed) and it is > * cleared in i40e_resume, where RTNL is not needed, but the i40e_resume > * case is handled by checking __I40E_SUSPENDED in the first if block. > */ > if (current_work() == &pf->service_task || > test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || > test_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state) || > test_bit(__I40E_CORE_RESET_REQUESTED, pf->state) | > test_bit(__I40E_SUSPENDED, pf->state)) > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > true); > else if (test_bit(__I40E_IN_REMOVE, pf->state) || > test_bit(__I40E_DOWN, pf->state)) > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > false); > else > __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, > true); > > > But please see below about i40e_free_q_vector. > >>>>> return 0; >>>>> } >>>>> @@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) >>>>> ring->queue_index, pf_q); >>>>> } >>>>> + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_RX, >>>>> + &ring->q_vector->napi); >>>>> >>>> Same as above. >>>> >>>> return 0; >>>>> } >>>>> @@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) >>>>> q_vector->affinity_notify.notify = i40e_irq_affinity_notify; >>>>> q_vector->affinity_notify.release = i40e_irq_affinity_release; >>>>> irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify); >>>>> + netif_napi_set_irq(&q_vector->napi, q_vector->irq_num); >>>>> + >>>>> /* Spread affinity hints out across online CPUs. >>>>> * >>>>> * get_cpu_mask returns a static constant mask with >>>>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c >>>>> index 64d198ed166b..d380885ff26d 100644 >>>>> --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c >>>>> +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c >>>>> @@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring) >>>>> void i40e_free_tx_resources(struct i40e_ring *tx_ring) >>>>> { >>>>> i40e_clean_tx_ring(tx_ring); >>>>> + i40e_queue_set_napi(tx_ring->vsi, tx_ring->queue_index, >>>>> + NETDEV_QUEUE_TYPE_TX, NULL); >>>>> kfree(tx_ring->tx_bi); >>>>> tx_ring->tx_bi = NULL; >>>>> @@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring) >>>>> void i40e_free_rx_resources(struct i40e_ring *rx_ring) >>>>> { >>>>> i40e_clean_rx_ring(rx_ring); >>>>> + i40e_queue_set_napi(rx_ring->vsi, rx_ring->queue_index, >>>>> + NETDEV_QUEUE_TYPE_RX, NULL); > > It appears to me that some cases may not end up calling > i40e_free_tx_resources or i40e_free_rx_resources, but most (or all?) cases > do call i40e_free_q_vector which is where the NAPI is deleted. > > It probably makes more sense to put the NULL setting where the NAPI delete > happens, and then check those paths to see where rtnl is taken and make > sure the bit checking in the if statement lines up properly. > > Before I go any deeper down this rabbit hole, I'll wait to see what the > i40e maintainers say / think about this. + Alex for input Thanks, Tony >>>>> if (rx_ring->vsi->type == I40E_VSI_MAIN) >>>>> xdp_rxq_info_unreg(&rx_ring->xdp_rxq); >>>>> rx_ring->xdp_prog = NULL;
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index 2fbabcdb5bb5..5900ed5c7170 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -1267,6 +1267,8 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); int i40e_open(struct net_device *netdev); int i40e_close(struct net_device *netdev); int i40e_vsi_open(struct i40e_vsi *vsi); +void i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, + enum netdev_queue_type type, struct napi_struct *napi); void i40e_vlan_stripping_disable(struct i40e_vsi *vsi); int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid); int i40e_vsi_add_vlan(struct i40e_vsi *vsi, u16 vid); diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 0bdcdea0be3e..6384a0c73a05 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3448,6 +3448,58 @@ static struct xsk_buff_pool *i40e_xsk_pool(struct i40e_ring *ring) return xsk_get_pool_from_qid(ring->vsi->netdev, qid); } +/** + * __i40e_queue_set_napi - Set the napi instance for the queue + * @dev: device to which NAPI and queue belong + * @queue_index: Index of queue + * @type: queue type as RX or TX + * @napi: NAPI context + * @locked: is the rtnl_lock already held + * + * Set the napi instance for the queue. Caller indicates the lock status. + */ +static void +__i40e_queue_set_napi(struct net_device *dev, unsigned int queue_index, + enum netdev_queue_type type, struct napi_struct *napi, + bool locked) +{ + if (!locked) + rtnl_lock(); + netif_queue_set_napi(dev, queue_index, type, napi); + if (!locked) + rtnl_unlock(); +} + +/** + * i40e_queue_set_napi - Set the napi instance for the queue + * @vsi: VSI being configured + * @queue_index: Index of queue + * @type: queue type as RX or TX + * @napi: NAPI context + * + * Set the napi instance for the queue. The rtnl lock state is derived from the + * execution path. + */ +void +i40e_queue_set_napi(struct i40e_vsi *vsi, unsigned int queue_index, + enum netdev_queue_type type, struct napi_struct *napi) +{ + struct i40e_pf *pf = vsi->back; + + if (!vsi->netdev) + return; + + if (current_work() == &pf->service_task || + test_bit(__I40E_PF_RESET_REQUESTED, pf->state) || + test_bit(__I40E_DOWN, pf->state) || + test_bit(__I40E_SUSPENDED, pf->state)) + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, + false); + else + __i40e_queue_set_napi(vsi->netdev, queue_index, type, napi, + true); +} + /** * i40e_configure_tx_ring - Configure a transmit ring context and rest * @ring: The Tx ring to configure @@ -3558,6 +3610,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring) /* cache tail off for easier writes later */ ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q); + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_TX, + &ring->q_vector->napi); return 0; } @@ -3716,6 +3770,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) ring->queue_index, pf_q); } + i40e_queue_set_napi(vsi, ring->queue_index, NETDEV_QUEUE_TYPE_RX, + &ring->q_vector->napi); return 0; } @@ -4178,6 +4234,8 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename) q_vector->affinity_notify.notify = i40e_irq_affinity_notify; q_vector->affinity_notify.release = i40e_irq_affinity_release; irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify); + netif_napi_set_irq(&q_vector->napi, q_vector->irq_num); + /* Spread affinity hints out across online CPUs. * * get_cpu_mask returns a static constant mask with diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 64d198ed166b..d380885ff26d 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -821,6 +821,8 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring) void i40e_free_tx_resources(struct i40e_ring *tx_ring) { i40e_clean_tx_ring(tx_ring); + i40e_queue_set_napi(tx_ring->vsi, tx_ring->queue_index, + NETDEV_QUEUE_TYPE_TX, NULL); kfree(tx_ring->tx_bi); tx_ring->tx_bi = NULL; @@ -1526,6 +1528,8 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring) void i40e_free_rx_resources(struct i40e_ring *rx_ring) { i40e_clean_rx_ring(rx_ring); + i40e_queue_set_napi(rx_ring->vsi, rx_ring->queue_index, + NETDEV_QUEUE_TYPE_RX, NULL); if (rx_ring->vsi->type == I40E_VSI_MAIN) xdp_rxq_info_unreg(&rx_ring->xdp_rxq); rx_ring->xdp_prog = NULL;
Make i40e compatible with the newly added netlink queue GET APIs. $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do queue-get --json '{"ifindex": 3, "id": 1, "type": "rx"}' {'id': 1, 'ifindex': 3, 'napi-id': 162, 'type': 'rx'} $ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \ --do napi-get --json '{"id": 162}' {'id': 162, 'ifindex': 3, 'irq': 136} The above output suggests that irq 136 was allocated for queue 1, which has a NAPI ID of 162. To double check this is correct, the IRQ to queue mapping can be verified by checking /proc/interrupts: $ cat /proc/interrupts | grep 136\: | \ awk '{print "irq: " $1 " name " $76}' irq: 136: name i40e-vlan300-TxRx-1 Suggests that queue 1 has IRQ 136, as expected. Signed-off-by: Joe Damato <jdamato@fastly.com> --- drivers/net/ethernet/intel/i40e/i40e.h | 2 + drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++ 3 files changed, 64 insertions(+)