Message ID | 20221219144103.34789-1-wanghai38@huawei.com |
---|---|
State | Awaiting Upstream |
Headers | show |
Series | kobject: Fix slab-out-of-bounds in fill_kobj_path() | expand |
On Mon, Dec 19, 2022 at 10:41:03PM +0800, Wang Hai wrote: > In kobject_get_path(), if kobj->name is changed between calls > get_kobj_path_length() and fill_kobj_path() and the length becomes > longer, then fill_kobj_path() will have an out-of-bounds bug. > > The actual current problem occurs when the ixgbe probe. > > In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name > length becomes longer, out-of-bounds will occur. > > cpu0 cpu1 > ixgbe_probe > register_netdev(netdev) > netdev_register_kobject > device_add > kobject_uevent // Sending ADD events > systemd-udevd // rename netdev > dev_change_name > device_rename > kobject_rename > | > ixgbe_mii_bus_init | > mdiobus_register | > __mdiobus_register | > device_register | > device_add | > kobject_uevent | > kobject_get_path | > len = get_kobj_path_length // old name | > path = kzalloc(len, gfp_mask); | > kobj->name = name; > /* name length becomes > * longer > */ > fill_kobj_path /* kobj path length is > * longer than path, > * resulting in out of > * bounds when filling path > */ > > This is the kasan report: > > ================================================================== > BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0 > Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673 > > Workqueue: events work_for_cpu_fn > Call Trace: > <TASK> > dump_stack_lvl+0x34/0x48 > print_address_description.constprop.0+0x86/0x1e7 > print_report+0x36/0x4f > kasan_report+0xad/0x130 > kasan_check_range+0x35/0x1c0 > memcpy+0x39/0x60 > fill_kobj_path+0x50/0xc0 > kobject_get_path+0x5a/0xc0 > kobject_uevent_env+0x140/0x460 > device_add+0x5c7/0x910 > __mdiobus_register+0x14e/0x490 > ixgbe_probe.cold+0x441/0x574 [ixgbe] > local_pci_probe+0x78/0xc0 > work_for_cpu_fn+0x26/0x40 > process_one_work+0x3b6/0x6a0 > worker_thread+0x368/0x520 > kthread+0x165/0x1a0 > ret_from_fork+0x1f/0x30 > > This reproducer triggers that bug: > > while: > do > rmmod ixgbe > sleep 0.5 > modprobe ixgbe > sleep 0.5 > > When calling fill_kobj_path() to fill path, if the name length of > kobj becomes longer, return failure and retry. > > Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") > Signed-off-by: Wang Hai <wanghai38@huawei.com> > --- > lib/kobject.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) Nice find, and a much better description than was reported here: https://lore.kernel.org/all/20221216031320.2634-1-alice.chao@mediatek.com/ Alice, does this patch resolve your problem as well? > > diff --git a/lib/kobject.c b/lib/kobject.c > index a0b2dbfcfa23..d129f437b200 100644 > --- a/lib/kobject.c > +++ b/lib/kobject.c > @@ -112,7 +112,7 @@ static int get_kobj_path_length(struct kobject *kobj) > return length; > } > > -static void fill_kobj_path(struct kobject *kobj, char *path, int length) > +static bool fill_kobj_path(struct kobject *kobj, char *path, int length) Just return an int and an error value, bool isn't a normal return value, right? > { > struct kobject *parent; > > @@ -121,12 +121,16 @@ static void fill_kobj_path(struct kobject *kobj, char *path, int length) > int cur = strlen(kobject_name(parent)); > /* back up enough to print this name with '/' */ > length -= cur; > + if (length < 0) > + return false; Return -EINVAL or something? What if length ends up 0 here, is that going to be ok? > memcpy(path + length, kobject_name(parent), cur); > *(path + --length) = '/'; > } > > pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj), > kobj, __func__, path); > + > + return true; return 0; > } > > /** > @@ -140,14 +144,20 @@ char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask) > { > char *path; > int len; > + bool ret; No need for this variable > > +retry: > len = get_kobj_path_length(kobj); > if (len == 0) > return NULL; > path = kzalloc(len, gfp_mask); > if (!path) > return NULL; > - fill_kobj_path(kobj, path, len); > + ret = fill_kobj_path(kobj, path, len); > + if (!ret) { Make this one line: if (fill_kobj_path(kobj, path, len)) { But, you now have a loop, what guarantees that you can get out of it? thanks, greg k-h
在 2022/12/19 22:54, Greg KH 写道: > On Mon, Dec 19, 2022 at 10:41:03PM +0800, Wang Hai wrote: >> In kobject_get_path(), if kobj->name is changed between calls >> get_kobj_path_length() and fill_kobj_path() and the length becomes >> longer, then fill_kobj_path() will have an out-of-bounds bug. >> >> The actual current problem occurs when the ixgbe probe. >> >> In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name >> length becomes longer, out-of-bounds will occur. >> >> cpu0 cpu1 >> ixgbe_probe >> register_netdev(netdev) >> netdev_register_kobject >> device_add >> kobject_uevent // Sending ADD events >> systemd-udevd // rename netdev >> dev_change_name >> device_rename >> kobject_rename >> | >> ixgbe_mii_bus_init | >> mdiobus_register | >> __mdiobus_register | >> device_register | >> device_add | >> kobject_uevent | >> kobject_get_path | >> len = get_kobj_path_length // old name | >> path = kzalloc(len, gfp_mask); | >> kobj->name = name; >> /* name length becomes >> * longer >> */ >> fill_kobj_path /* kobj path length is >> * longer than path, >> * resulting in out of >> * bounds when filling path >> */ >> >> This is the kasan report: >> >> ================================================================== >> BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0 >> Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673 >> >> Workqueue: events work_for_cpu_fn >> Call Trace: >> <TASK> >> dump_stack_lvl+0x34/0x48 >> print_address_description.constprop.0+0x86/0x1e7 >> print_report+0x36/0x4f >> kasan_report+0xad/0x130 >> kasan_check_range+0x35/0x1c0 >> memcpy+0x39/0x60 >> fill_kobj_path+0x50/0xc0 >> kobject_get_path+0x5a/0xc0 >> kobject_uevent_env+0x140/0x460 >> device_add+0x5c7/0x910 >> __mdiobus_register+0x14e/0x490 >> ixgbe_probe.cold+0x441/0x574 [ixgbe] >> local_pci_probe+0x78/0xc0 >> work_for_cpu_fn+0x26/0x40 >> process_one_work+0x3b6/0x6a0 >> worker_thread+0x368/0x520 >> kthread+0x165/0x1a0 >> ret_from_fork+0x1f/0x30 >> >> This reproducer triggers that bug: >> >> while: >> do >> rmmod ixgbe >> sleep 0.5 >> modprobe ixgbe >> sleep 0.5 >> >> When calling fill_kobj_path() to fill path, if the name length of >> kobj becomes longer, return failure and retry. >> >> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") >> Signed-off-by: Wang Hai <wanghai38@huawei.com> >> --- >> lib/kobject.c | 14 ++++++++++++-- >> 1 file changed, 12 insertions(+), 2 deletions(-) > Nice find, and a much better description than was reported here: > https://lore.kernel.org/all/20221216031320.2634-1-alice.chao@mediatek.com/ > > Alice, does this patch resolve your problem as well? > >> diff --git a/lib/kobject.c b/lib/kobject.c >> index a0b2dbfcfa23..d129f437b200 100644 >> --- a/lib/kobject.c >> +++ b/lib/kobject.c >> @@ -112,7 +112,7 @@ static int get_kobj_path_length(struct kobject *kobj) >> return length; >> } >> >> -static void fill_kobj_path(struct kobject *kobj, char *path, int length) >> +static bool fill_kobj_path(struct kobject *kobj, char *path, int length) > Just return an int and an error value, bool isn't a normal return value, > right? Hi, Greg. Thanks for the suggestion, I will change it to int. >> { >> struct kobject *parent; >> >> @@ -121,12 +121,16 @@ static void fill_kobj_path(struct kobject *kobj, char *path, int length) >> int cur = strlen(kobject_name(parent)); >> /* back up enough to print this name with '/' */ >> length -= cur; >> + if (length < 0) >> + return false; > Return -EINVAL or something? > > What if length ends up 0 here, is that going to be ok? If length is 0, there is not enough space for '/', which is also problematic. Thank you for the reminder. > >> memcpy(path + length, kobject_name(parent), cur); >> *(path + --length) = '/'; >> } >> >> pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj), >> kobj, __func__, path); >> + >> + return true; > return 0; > >> } >> >> /** >> @@ -140,14 +144,20 @@ char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask) >> { >> char *path; >> int len; >> + bool ret; > No need for this variable > >> >> +retry: >> len = get_kobj_path_length(kobj); >> if (len == 0) >> return NULL; >> path = kzalloc(len, gfp_mask); >> if (!path) >> return NULL; >> - fill_kobj_path(kobj, path, len); >> + ret = fill_kobj_path(kobj, path, len); >> + if (!ret) { > Make this one line: > > if (fill_kobj_path(kobj, path, len)) { > > But, you now have a loop, what guarantees that you can get out of it? fill_kobj_path() may fail only when the name of kobj or parent is changed, this change does not happen forever. And when retrying, the length of the current kobj path is recalculated, which can guarantee that the length is satisfied next time. Can I send v2 like this? diff --git a/lib/kobject.c b/lib/kobject.c index a0b2dbfcfa23..3f97d903266a 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -112,7 +112,7 @@ static int get_kobj_path_length(struct kobject *kobj) return length; } -static void fill_kobj_path(struct kobject *kobj, char *path, int length) +static int fill_kobj_path(struct kobject *kobj, char *path, int length) { struct kobject *parent; @@ -121,12 +121,16 @@ static void fill_kobj_path(struct kobject *kobj, char *path, int length) int cur = strlen(kobject_name(parent)); /* back up enough to print this name with '/' */ length -= cur; + if (length <= 0) + return -EINVAL; memcpy(path + length, kobject_name(parent), cur); *(path + --length) = '/'; } pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj), kobj, __func__, path); + + return 0; } /** @@ -141,13 +145,17 @@ char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask) char *path; int len; +retry: len = get_kobj_path_length(kobj); if (len == 0) return NULL; path = kzalloc(len, gfp_mask); if (!path) return NULL; - fill_kobj_path(kobj, path, len); + if (fill_kobj_path(kobj, path, len)) { + kfree(path); + goto retry; + } return path; } > > thanks, > > greg k-h > .
On Mon, Dec 19, 2022 at 11:27:58PM +0800, wanghai (M) wrote: > Can I send v2 like this? > > diff --git a/lib/kobject.c b/lib/kobject.c > index a0b2dbfcfa23..3f97d903266a 100644 > --- a/lib/kobject.c > +++ b/lib/kobject.c > @@ -112,7 +112,7 @@ static int get_kobj_path_length(struct kobject *kobj) > return length; > } > > -static void fill_kobj_path(struct kobject *kobj, char *path, int length) > +static int fill_kobj_path(struct kobject *kobj, char *path, int length) > { > struct kobject *parent; > > @@ -121,12 +121,16 @@ static void fill_kobj_path(struct kobject *kobj, char > *path, int length) > int cur = strlen(kobject_name(parent)); > /* back up enough to print this name with '/' */ > length -= cur; > + if (length <= 0) > + return -EINVAL; > memcpy(path + length, kobject_name(parent), cur); > *(path + --length) = '/'; > } > > pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", > kobject_name(kobj), > kobj, __func__, path); > + > + return 0; > } > > /** > @@ -141,13 +145,17 @@ char *kobject_get_path(struct kobject *kobj, gfp_t > gfp_mask) > char *path; > int len; > > +retry: > len = get_kobj_path_length(kobj); > if (len == 0) > return NULL; > path = kzalloc(len, gfp_mask); > if (!path) > return NULL; > - fill_kobj_path(kobj, path, len); > + if (fill_kobj_path(kobj, path, len)) { > + kfree(path); > + goto retry; > + } Much nicer, thanks!
diff --git a/lib/kobject.c b/lib/kobject.c index a0b2dbfcfa23..d129f437b200 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -112,7 +112,7 @@ static int get_kobj_path_length(struct kobject *kobj) return length; } -static void fill_kobj_path(struct kobject *kobj, char *path, int length) +static bool fill_kobj_path(struct kobject *kobj, char *path, int length) { struct kobject *parent; @@ -121,12 +121,16 @@ static void fill_kobj_path(struct kobject *kobj, char *path, int length) int cur = strlen(kobject_name(parent)); /* back up enough to print this name with '/' */ length -= cur; + if (length < 0) + return false; memcpy(path + length, kobject_name(parent), cur); *(path + --length) = '/'; } pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj), kobj, __func__, path); + + return true; } /** @@ -140,14 +144,20 @@ char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask) { char *path; int len; + bool ret; +retry: len = get_kobj_path_length(kobj); if (len == 0) return NULL; path = kzalloc(len, gfp_mask); if (!path) return NULL; - fill_kobj_path(kobj, path, len); + ret = fill_kobj_path(kobj, path, len); + if (!ret) { + kfree(path); + goto retry; + } return path; }
In kobject_get_path(), if kobj->name is changed between calls get_kobj_path_length() and fill_kobj_path() and the length becomes longer, then fill_kobj_path() will have an out-of-bounds bug. The actual current problem occurs when the ixgbe probe. In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name length becomes longer, out-of-bounds will occur. cpu0 cpu1 ixgbe_probe register_netdev(netdev) netdev_register_kobject device_add kobject_uevent // Sending ADD events systemd-udevd // rename netdev dev_change_name device_rename kobject_rename | ixgbe_mii_bus_init | mdiobus_register | __mdiobus_register | device_register | device_add | kobject_uevent | kobject_get_path | len = get_kobj_path_length // old name | path = kzalloc(len, gfp_mask); | kobj->name = name; /* name length becomes * longer */ fill_kobj_path /* kobj path length is * longer than path, * resulting in out of * bounds when filling path */ This is the kasan report: ================================================================== BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0 Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673 Workqueue: events work_for_cpu_fn Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x86/0x1e7 print_report+0x36/0x4f kasan_report+0xad/0x130 kasan_check_range+0x35/0x1c0 memcpy+0x39/0x60 fill_kobj_path+0x50/0xc0 kobject_get_path+0x5a/0xc0 kobject_uevent_env+0x140/0x460 device_add+0x5c7/0x910 __mdiobus_register+0x14e/0x490 ixgbe_probe.cold+0x441/0x574 [ixgbe] local_pci_probe+0x78/0xc0 work_for_cpu_fn+0x26/0x40 process_one_work+0x3b6/0x6a0 worker_thread+0x368/0x520 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 This reproducer triggers that bug: while: do rmmod ixgbe sleep 0.5 modprobe ixgbe sleep 0.5 When calling fill_kobj_path() to fill path, if the name length of kobj becomes longer, return failure and retry. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai <wanghai38@huawei.com> --- lib/kobject.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)