diff mbox series

[net-next] bonding: deal with xfrm state in all modes and add more error-checking

Message ID 20200708174631.15286-1-jarod@redhat.com
State Awaiting Upstream
Headers show
Series [net-next] bonding: deal with xfrm state in all modes and add more error-checking | expand

Commit Message

Jarod Wilson July 8, 2020, 5:46 p.m. UTC
It's possible that device removal happens when the bond is in non-AB mode,
and addition happens in AB mode, so bond_ipsec_del_sa() never gets called,
which leaves security associations in an odd state if bond_ipsec_add_sa()
then gets called after switching the bond into AB. Just call add and
delete universally for all modes to keep things consistent.

However, it's also possible that this code gets called when the system is
shutting down, and the xfrm subsystem has already been disconnected from
the bond device, so we need to do some error-checking and bail, lest we
hit a null ptr deref.

Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load")
CC: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
 drivers/net/bonding/bond_main.c | 39 +++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 14 deletions(-)

Comments

David Miller July 8, 2020, 10:37 p.m. UTC | #1
From: Jarod Wilson <jarod@redhat.com>
Date: Wed,  8 Jul 2020 13:46:31 -0400

> It's possible that device removal happens when the bond is in non-AB mode,
> and addition happens in AB mode, so bond_ipsec_del_sa() never gets called,
> which leaves security associations in an odd state if bond_ipsec_add_sa()
> then gets called after switching the bond into AB. Just call add and
> delete universally for all modes to keep things consistent.
> 
> However, it's also possible that this code gets called when the system is
> shutting down, and the xfrm subsystem has already been disconnected from
> the bond device, so we need to do some error-checking and bail, lest we
> hit a null ptr deref.
> 
> Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load")
> Signed-off-by: Jarod Wilson <jarod@redhat.com>

Applied, thanks Jarod.
diff mbox series

Patch

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2adf6ce20a38..f886d97c4359 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -383,9 +383,14 @@  static int bond_vlan_rx_kill_vid(struct net_device *bond_dev,
 static int bond_ipsec_add_sa(struct xfrm_state *xs)
 {
 	struct net_device *bond_dev = xs->xso.dev;
-	struct bonding *bond = netdev_priv(bond_dev);
-	struct slave *slave = rtnl_dereference(bond->curr_active_slave);
+	struct bonding *bond;
+	struct slave *slave;
 
+	if (!bond_dev)
+		return -EINVAL;
+
+	bond = netdev_priv(bond_dev);
+	slave = rtnl_dereference(bond->curr_active_slave);
 	xs->xso.real_dev = slave->dev;
 	bond->xs = xs;
 
@@ -405,8 +410,14 @@  static int bond_ipsec_add_sa(struct xfrm_state *xs)
 static void bond_ipsec_del_sa(struct xfrm_state *xs)
 {
 	struct net_device *bond_dev = xs->xso.dev;
-	struct bonding *bond = netdev_priv(bond_dev);
-	struct slave *slave = rtnl_dereference(bond->curr_active_slave);
+	struct bonding *bond;
+	struct slave *slave;
+
+	if (!bond_dev)
+		return;
+
+	bond = netdev_priv(bond_dev);
+	slave = rtnl_dereference(bond->curr_active_slave);
 
 	if (!slave)
 		return;
@@ -960,12 +971,12 @@  void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 	if (old_active == new_active)
 		return;
 
-	if (new_active) {
 #ifdef CONFIG_XFRM_OFFLOAD
-		if ((BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) && bond->xs)
-			bond_ipsec_del_sa(bond->xs);
+	if (old_active && bond->xs)
+		bond_ipsec_del_sa(bond->xs);
 #endif /* CONFIG_XFRM_OFFLOAD */
 
+	if (new_active) {
 		new_active->last_link_up = jiffies;
 
 		if (new_active->link == BOND_LINK_BACK) {
@@ -1028,13 +1039,6 @@  void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 					bond_should_notify_peers(bond);
 			}
 
-#ifdef CONFIG_XFRM_OFFLOAD
-			if (old_active && bond->xs) {
-				xfrm_dev_state_flush(dev_net(bond->dev), bond->dev, true);
-				bond_ipsec_add_sa(bond->xs);
-			}
-#endif /* CONFIG_XFRM_OFFLOAD */
-
 			call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, bond->dev);
 			if (should_notify_peers) {
 				bond->send_peer_notif--;
@@ -1044,6 +1048,13 @@  void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 		}
 	}
 
+#ifdef CONFIG_XFRM_OFFLOAD
+	if (new_active && bond->xs) {
+		xfrm_dev_state_flush(dev_net(bond->dev), bond->dev, true);
+		bond_ipsec_add_sa(bond->xs);
+	}
+#endif /* CONFIG_XFRM_OFFLOAD */
+
 	/* resend IGMP joins since active slave has changed or
 	 * all were sent on curr_active_slave.
 	 * resend only if bond is brought up with the affected