Message ID | 20200303182610.35628-1-sasha.neftin@intel.com |
---|---|
State | Accepted |
Delegated to: | Jeff Kirsher |
Headers | show |
Series | [v2,1/1] igc: Remove copper fiber switch control | expand |
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of > Sasha Neftin > Sent: Tuesday, March 3, 2020 10:26 AM > To: intel-wired-lan@lists.osuosl.org > Subject: [Intel-wired-lan] [PATCH v2 1/1] igc: Remove copper fiber switch > control > > i225 device support copper mode only > PHY signal detect indication for copper fiber switch > not applicable to i225 part > > v1 -> v2: > Address community comments and leave igc_ethtool.c no changes > > Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> > --- > drivers/net/ethernet/intel/igc/igc_defines.h | 2 -- > drivers/net/ethernet/intel/igc/igc_main.c | 9 --------- > 2 files changed, 11 deletions(-) > Tested-by: Aaron Brown <aaron.f.brown@intel.com>
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index dd0c86ce09ed..e5116337b68d 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -91,8 +91,6 @@ #define IGC_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ #define IGC_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ -#define IGC_CONNSW_AUTOSENSE_EN 0x1 - /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */ #define MAX_JUMBO_FRAME_SIZE 0x2600 diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index d406aaea24af..47009fe0cbde 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -4036,7 +4036,6 @@ static void igc_watchdog_task(struct work_struct *work) struct igc_hw *hw = &adapter->hw; struct igc_phy_info *phy = &hw->phy; u16 phy_data, retry_count = 20; - u32 connsw; u32 link; int i; @@ -4049,14 +4048,6 @@ static void igc_watchdog_task(struct work_struct *work) link = false; } - /* Force link down if we have fiber to swap to */ - if (adapter->flags & IGC_FLAG_MAS_ENABLE) { - if (hw->phy.media_type == igc_media_type_copper) { - connsw = rd32(IGC_CONNSW); - if (!(connsw & IGC_CONNSW_AUTOSENSE_EN)) - link = 0; - } - } if (link) { /* Cancel scheduled suspend requests. */ pm_runtime_resume(netdev->dev.parent);
i225 device support copper mode only PHY signal detect indication for copper fiber switch not applicable to i225 part v1 -> v2: Address community comments and leave igc_ethtool.c no changes Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> --- drivers/net/ethernet/intel/igc/igc_defines.h | 2 -- drivers/net/ethernet/intel/igc/igc_main.c | 9 --------- 2 files changed, 11 deletions(-)