diff mbox series

[jkirsher/next-queue,02/16] ixgbe: Perform reinit any time number of VFs change

Message ID 20171122185622.29785.67698.stgit@localhost.localdomain
State Accepted
Delegated to: Jeff Kirsher
Headers show
Series ixgbe/fm10k: macvlan fixes | expand

Commit Message

Alexander Duyck Nov. 22, 2017, 6:56 p.m. UTC
From: Alexander Duyck <alexander.h.duyck@intel.com>

If the number of VFs are changed we need to reinitialize the part since the
offset for the device and the number of pools will be incorrect. Without
this change we can end up seeing Tx hangs and dropped Rx frames for
incoming traffic.

In addition we should drop the code that is arbitrarily changing the
default pool and queue configuration. Instead we should wait until the port
is reset and reconfigured via ixgbe_sriov_reinit.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |   19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

Comments

Bowers, AndrewX Nov. 29, 2017, 5 p.m. UTC | #1
> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces@osuosl.org] On
> Behalf Of Alexander Duyck
> Sent: Wednesday, November 22, 2017 10:56 AM
> To: intel-wired-lan@lists.osuosl.org
> Subject: [Intel-wired-lan] [jkirsher/next-queue PATCH 02/16] ixgbe: Perform
> reinit any time number of VFs change
> 
> From: Alexander Duyck <alexander.h.duyck@intel.com>
> 
> If the number of VFs are changed we need to reinitialize the part since the
> offset for the device and the number of pools will be incorrect. Without this
> change we can end up seeing Tx hangs and dropped Rx frames for incoming
> traffic.
> 
> In addition we should drop the code that is arbitrarily changing the default
> pool and queue configuration. Instead we should wait until the port is reset
> and reconfigured via ixgbe_sriov_reinit.
> 
> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
> ---
>  drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |   19 +++----------------
>  1 file changed, 3 insertions(+), 16 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 112d24c6c9ce..15d89258fbc3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -227,9 +227,6 @@  void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, unsigned int max_vfs)
 int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 {
 	unsigned int num_vfs = adapter->num_vfs, vf;
-	struct ixgbe_hw *hw = &adapter->hw;
-	u32 gpie;
-	u32 vmdctl;
 	int rss;
 
 	/* set num VFs to 0 to prevent access to vfinfo */
@@ -271,18 +268,6 @@  int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 	pci_disable_sriov(adapter->pdev);
 #endif
 
-	/* turn off device IOV mode */
-	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, 0);
-	gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
-	gpie &= ~IXGBE_GPIE_VTMODE_MASK;
-	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
-
-	/* set default pool back to 0 */
-	vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
-	vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
-	IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
-	IXGBE_WRITE_FLUSH(hw);
-
 	/* Disable VMDq flag so device will be set in VM mode */
 	if (adapter->ring_feature[RING_F_VMDQ].limit == 1) {
 		adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
@@ -378,13 +363,15 @@  static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
 	int err;
 #ifdef CONFIG_PCI_IOV
 	u32 current_flags = adapter->flags;
+	int prev_num_vf = pci_num_vf(dev);
 #endif
 
 	err = ixgbe_disable_sriov(adapter);
 
 	/* Only reinit if no error and state changed */
 #ifdef CONFIG_PCI_IOV
-	if (!err && current_flags != adapter->flags)
+	if (!err && (current_flags != adapter->flags ||
+		     prev_num_vf != pci_num_vf(dev)))
 		ixgbe_sriov_reinit(adapter);
 #endif