Message ID | 20210219130001.49600-1-haiyue.wang@intel.com |
---|---|
Headers | show |
Series | Enable Intel VF flow director with DDP | expand |
Haiyue Wang wrote: > The Intel E810 Series supports a programmable pipeline for a domain > specific protocols classification, for example GTP by Dynamic Device > Personalization (DDP) profile. > > The E810 PF has introduced flex-bytes support by ethtool user-def option > allowing for packet deeper matching based on an offset and value for DDP > usage. > > For making VF also benefit from this flexible protocol classification, some > new virtchnl messages are defined and handled by PF, so VF can query this > new flow director capability, and use ethtool with extending the user-def > option to configure Rx flow classification. > > The new user-def 0xAAAABBBBCCCCDDDD: BBBB is the 2 byte pattern while AAAA > corresponds to its offset in the packet. Similarly DDDD is the 2 byte > pattern with CCCC being the corresponding offset. The offset ranges from > 0x0 to 0x1F7 (up to 504 bytes into the packet). The offset starts from > the beginning of the packet. Why must you use the ethtool user-def interface like this? I suspect that you should be using tc-u32. At the very least you should cover why you're *not* using u32 in the cover letter, otherwise I'm sure the question will come up. > This feature can be used to allow customers to set flow director rules > for protocols headers that are beyond standard ones supported by ethtool > (e.g. PFCP or GTP-U). > > Like for matching GTP-U's TEID value 0x10203040: > ethtool -N ens787f0v0 flow-type udp4 dst-port 2152 \ >